Test Rig Dealers

• Country of Origin: India
• Usage: Laboratory

This unit is made of fiber reinforced plastics, consists of a blower, packing material for increasing the contact between water and air, water re circulation pump with a sump tank connected with a heater. The temperature of the in& outlet water.  Wet bulb thermometer is provided to measure the moisture content in the outlet air thereby can be used to measure evaporation losses.

The Vortex Tube Test Rig is one of the non- conventional methods of cooling which has no moving parts. It requires only source of compressed air. Through this tube, when air is admitted at high pressure, from one end, hot sir is discharged and from the other end, cold air comes out. The test rig is designed such that all the performance can be evaluated. Customer Scope Electrical power point 230 volts, 50 HZ, 1 ph, with 16 amps MCB.Clear space of 3 m x 2 m.Compressed air supply at 5 bar & 50 CFM List of Experiments To understand the principle of working Vortex Tube To evaluate Adiabatic Efficiency of the system.To evaluate C.O.P. of the system.To find out Refrigeration Effect per kg of air supplied.

• Type: Refrigeration System
• Certification: ISO 9001:2008 Certified
• Voltage: 220V

  Domestic Refrigerator Test Rig   Double wall construction. Inner chamber  made of stainless steel sheet. Supplied with  removable perforted shelves. Exterior made out of thick mild steel  sheet duly finished in white stoving enamel/powder coated paint with finished Colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Fitted by M.S (Mid-Steel) pipe and sheet stand.      

• Voltage: 230 V

The test rig provided study of a diesel engine testing. The rig comprises of a four stroke diesel engine coupled to a rope brake for variable speed or electrical dynamometer. A water cooled brake drum alongwith spring balances, comprises rope brake. For electrical dynamometer water- rheostats is used as loading arrangement. With the help of various measurement provided, the test rig can determine BHP, IHP, mechanical & thermal efficiencies, air fuel ratio, specific fuel consumption and heat balance sheet at various loads

The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. This enables you to determine the pressure loss curve on the medium without a dust coating, fraction separation efficiency, or burden and fraction separation efficiency during application of the burden and the gravimetric separation efficiency within shortest times – reliably and therefore cost-effectively. The MFP 3000 operates in suction mode. This ensures a particularly uniform formation of the dust cake even at high inflow speeds. With the aid of the light scattering spectrometer Promo® 3000, clear and reliable determination of the aerosol concentration and the particle size and therefore a clear determination of the fraction separation efficiency can be ensured. In addition, use of the welas® digital 3000 or Promo® 3000 with two sensors for virtually simultaneous particle measurement offers the following advantages: Fully-automatic measurement of fraction separation efficiency

We are a one-stop destination and the perfect place for purchasing excellence assured Diesel Engine Test Rig. A capacious warehouse and well-organized Warehouse Management System helps us in loading and unloading of all the products within short time. We keep our inventory updated by recording warehouse transactions and delivery of goods.

The company is a prominent Manufacturer and Supplier of Francis Turbine Test Rigs. This is a reaction turbine and this Test Rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine.   Specifications : This Francis Turbine Test Rig I00mm size to develop 2 HP at 1250 RPM with a flow of about 1400 Ipm at 15 meters supply head. Supply pump set lOOxlOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine. Monoblock Centrifugal Pump  -  (5 HP, 3 Phases, 440V) Pump Size  -  Suction size 80mm & Delivery size 80mm Pump Discharge  -  1500 LPM Delivery Head ; 15 meter RPM  -  3000 RPM   Sump Tank : MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange Within the floor space of main unit. Capacity 650 Itr. Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load. Runner Diameter 220mm. Discharge Butter Fly valve used to control the flow rate of water. Spring Balance 6 Kg (Salter Make) Pressure Gauge of 4.2 kg/cm2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation. Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities : To determine the efficiency of Turbine To draw the characteristics curve of Turbine

Product Code: EKE 2101The test rig comprises of a two-stage air compressor fitted with an air tank with orifice, pressure gauges 9 an energy meter to measure the input & a Temperature indicator measures the temperatures at various points. The compressor is mounted on air receiver along with the motor, and is provided with air relief valve (safety) and a pressure switch. The unit determines volumetric efficiency and isothermal efficiency at various discharge pressuresSpecifications:Air compressor - Double cylinder, two-stage type driven by a 2-hp. Three - phase motor mounted on air receiver provided with delivery valve.Air tank and orifice with water manometer for air intake measurement.Pressure gauges at outlet on both stages.Digital temperature indicator.Energy meter to measure input power.A technical manual accompanies the equipments.Services Required:Floor space of 2,5 X 1.5m.440 V, 15A, 3ph. AC supply with neutral and earthing connection.A hand tachometer.

• Driven Type: Electric
• Material: Steel
• Thickness: 16 - 22 mm
• Polished: Polished
• Frequency: 60 - 70 Hz
• Range: 60 LPM
• Usage: Industrial

This unit of Refrigeration Test Rig consists of a hermetically sealed compressor with air cooled condenser. The capillary or expansion valves are next to the condensers followed by medium temperature evaporators. Electrical energy supplied to the compressor can be measured by energy meter. The equipment is mounted on a sturdy frame with control panel. ExperimentTo determine COP of unit Technical SpecificationsCompressor : ISI Kirloskar / Tecemshah Hermetically sealed compressor capacity.Compressor Capacity : ½ HPCondenser : Suitable for above compressor with suitable cooling fan & Fins and Copper Tube Air CooledExpansion Device : Capillary Tube & Filter / DrierPressure Gauge : 2 Nos. for high and low pressure.Service valves : 4 Nos. Hand set valveEvaporator Coil : Suitable for above compressor immersed in Water tank.Refrigerant- Freon : 12 /134aRotameter : Suitable for Compressor capacity Glass tube Rotameter to measure the flow of liquid refrigerant gasControl Panel Comprises Of Main SwitchVoltmeter Digital type – 1 Nos.Amp. Meter Digital type – 1 Nos.Energy Meter for Compressor inputSwitches Indication Lights etc.Digital Temperature Indicator: 5 Nos.Temperature Sensor (Thermocouple): 5 Nos.Voltage : Single Phase 220 Volts 50Hz. AC SupplyManual : Operation and maintenances manual should be provided along with the supplied equipment.

Paskals can supply fully automatic software controlled Fuel Injection Pump Test Rigs for performance & operational testing of pump at variable Pressure, Flow, Temperature& RPM ratings. The Test Rig comprises of Hydraulic Power Pack, Cooling Circuit, Lubrication Circuit and Gear Box with all measuring Instrumentation namely Pressure Transmitters, Flow meters, RTD’s etc with control & other safety features. Testing can be done at 120ºC using ATF.

We are manufacturer for all types pumps testing machine our 25 year acspiryns to all types pumps testing equipment and s p m shree

Two main components from main parts of the test rig. Welded steel base plate, complete with Rope Brake Dynamometer provided with cooling water arrangement. Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement system, temperature and speed indicator.

The Air Conditioning Test Rig unit is required to conduct experiments and demonstrate the process of cooling of atmospheric air. The unit will be fitted with all instruments facilities so that temperature, pressure etc. may be measured at different points in the air conditioning system.Experimentation : To study the Vapour Compression air conditioning cycle. To Calculate Co-efficient of performance-(COP) by the use of P-H diagram. Utilities Required :   Electric supply Single Phase, 220 V AC, 50 Hz. 10 Amp.  Floor area: 1.3 m x 1.2m approx

• Weight: 100-400kg
• Voltage: 220V
• Application: Industrial Use
• Power: 1-3kw
• Automation Grade: Automatic
• Utilities Required: Water Supply and Drain.
• Electricity: 15 kW, 440V AC, Three Phase

We bring forth premium Pelton Wheel Turbine Test Rig in India. Our Turbine Test Rig is specially designed for experimental purposes in laboratories. Our Turbine Test Rig is manufactured as per the international quality standards and premium components to ensure high durability. We make available Pelton Wheel Turbine Test Rig with different technical specifications according to the requirement of buyers. Buyers can acquire Pelton Wheel Turbine Test Rig from us at affordable price.Experiments :        To study the operation of a Pelton Wheel Turbine        To determine the Output Power of Pelton Wheel Turbine        To determine the Turbine Efficiency

Heat Pump Test Rig Range of Experiments to be Carried Out• To observe the working principal of heat pump cycle• To determine Actual cooling C.O.P, Carnot C.O.P., Theoretical C.O.P., Actual heating C.O.P., Relative C.O.P., Ton of Refrigeration Etc.• To determine the efficiency of the heat pump system• Observe the working of refrigeration cycle also

• Material: MS
• Torque sensor: Reaction type strain gauge
• Speed indicator: Digital with non contact type speed sensor
• Rotameter: Engine cooling100-1000 LPH, Calorimeter 25-250 LPH Water,Circulation Pump for Cooling .
• Torque Range: 1 Nm to massive 5000 Nm
• Engine test setup for Petrol Engine: 2 Stroke 3 cylinder, 4 stroke 4 Cylinder

• size: 50mm
• speed: 3000 RPM

Pumps, This unit are a self-contained recirculation type unit. All the measurements are provided to evaluate the performance of the pump. The system is closed circuit. Water supplied from centrifugal pump. Rope break dynamometer is used to measure the output of turbine. Pressure Gauge and Orificemeter are used to measure the input of turbine. The system is closed circuit. Sump Tank: Fiber glass lined MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 300 Liter.