Testing Equipment Dealers in Chandigarh

We manufacture moving iron/ moving coil and digital panel meters in all standard ranges and sizes. These are available in 144x144mm, 96x96mm, and 72x72mm for ac and dc measurement. At present, our manufacturing range consists of Amp/Volt, hz and Phase sequence indicators. Our Electrical Panel Meters are suitable for Electric Panels, Welding Sets, Electroplating Rectifiers, Machineries, Power Supplies, Dg Sets, Battery Chargers, Sub Stations etc. Electrical Panel Meters can be calibrated as per customer requirements.

• Material: Plastic
• Shape: Square
• Application: Household, Industrial
• Feature: High Accuracy, Light Weight
• Display Type: Digital
• Power Source: Electric

• Brand Name: Yokogawa
• Channels: 8 channel
• Bandwidth: 300MHz and 500MHz
• Model Number: DLM4000

The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic analysis. Advanced measurement and analysis features such as power analysis and serial-bus analysis, digital filtering, user-defined math, and super-long record lengths (up to 250 Mega Points) make the DLM4000 a super powerful engineering tool. High-resolution 12.1-inch LCD display, compact landscape format, ergonomic and friendly user-interface make it easy to use.

pH meter, electric device used to measure hydrogen-ion activity (acidity or alkalinity) in solution. Fundamentally, a pH meter consists of a voltmeter attached to a pH-responsive electrode and a reference (unvarying) electrode

• Type: Magnetic Flow meter
• Pressure: 10 kg/cm2 / others
• Display: LCD display with push button programming
• Temperature: -25 °C  to 120 °C
• Liner: Rubber / PTFE
• Electrodes: SS316L / Hestalloy / Tantalum / Ti.
• Connection: CS Flanged / wafer type
• Outputs Diagnostic: 4-20mA, RS485 /RS232, HART Inbuilt, empty pipe, reverse flow, totallizer reset, backlit lcd, alarm function, smart electronics
• Transmitter: Integral / Separate wall mounted, with LCD display, flow rate, Totallized flow
• Enclosure Protection  : Die cast aluminium IP65/IP68

• Feature: Customized design, Dimensionally accurate, Fine finishing .

As entrainment of air in limited percentage improves durability of concrete and very low percentages deteriorate it, measurement of air entrapped in freshly mixed concrete becomes important. The use of chemical additives to increase workability of concrete in turn requires an air content check to be made. Air entrainment meters are used to determine air entrained in freshly mixed concrete by pressure method. The apparatus consists of a pressure tight flanged cylindrical measuring bowl. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a petcock for bleeding off the water. A transparent cylindrical stand pipe which is graduated in air content is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of a pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base. The instrument is supplied complete with one each following accessories. Calibration cylinder with spring clamp, trowel, tamping rod, straight edge. Rubber mallet and measure.

USED FOR Circuit loads up to 3000 A Voltage, resistance, capacitance, contact and non-contact temperature measurement.     APPLICATIONS IN MANUFACTURING Inspecting electrical distribution systems. Diagnosing HVACR, Chillers Motor/motor control diagnostics Circuit balancing and loading

• Accuracy: ± 2 FS ± 1 digit
• Display: 3½ digit LED display

Digital TDS meter 3½ digit LED display . Cell constant adjustment along with TDS cell mains operated .Digital TDS Meter. Weight:2 Kg (approx).

• Features: Easy-to-use reliable and portable design, Has provision for wall mounting outside the ESD protected area, It can check voltages of +ve and -ve polarites.

• Type: Digital
• Voltage: 240V
• Frequency: 50Hz
• Weight: 4Kg
• Temperature Sensors: 27 Degree C
• Number Of Modules: 2 Modules
• Phase: Three Phase  

• Port: Mumbai
• WEIGHT: 1.15 kg

The Digital Multi-meter is a very affordable and handy piece of test equipment.  It also has a built-in diode test and transistor test feature.  Continuity Tester with Buzzer Removable Test Leads Included Imported Product

Technical Specification: Sensor Type Conductivity Range 0-200mS Resolution 0 .001uS Operating Temperature 0 to 70 °C Accuracy 0.5% of full scale

• Power: 9V Alkaline Battery (excluded)
• Features: Check RJ11, RJ45 and BNC connectors, Verify continuity, opens, shorted or cross wire paired, Move switch to S to slowdown auto test feature, Small size and lightweight to carry
• Indicator: LED Lights
• Electricity: 25mA
• LxWxH(mm): 104 x 96x 27

• Brand Name: Medilab
• Material: Steel
• Accuracy: (+/-) 0.5% traceable to National Physical Laboratory
• Min Temperature: -35 deg C
• Max Temperature: 120 deg C
• Model No: RBE-1000N
• Load Frequency: 0 - 5 Hz

• Feature: User-friendly,High Reliable,Colorful bar/curve diagrams,Audible alarm

• Application: Earth Testing
• Power Source: Electric
• Display: Digital
• Tester Type: High Voltage Insulation Tester
• Display Digit: 4