Voltage Stabilizers Dealers in Chandigarh

• Type: Automatic Voltage Regulator
• Material: Aluminium
• Application: Electricity Use
• Color: Available in Many Colors
• Operating Temperature: -25 +85deg C
• Feature: Accurate Reading
• Current Type: AC
• Puncture Voltage: 0-50W

Specification Rating 0.5, 1,2,3,4,5,7.5 & 10KVA Input Voltage 165 - 260 V.AC Output Voltage 200 - 240 V.AC Frequency 50 Hz Also available in extended input and output voltage Input Voltage 145 - 270V Output Voltage 200 - 245 Automatic Voltage Stabilizer with UV/OV cut-off and time delay arrangements are also available. Fitted with transformers specially designed to take high starting current of inductive loads Fully tropicalized units with high-grade components ensure trouble-fee operation. Zenner controlled triggered circuitry instantly controls output voltage. Continuous monitoring meter indicates both, input and output voltage.

• Voltage: 220V
• Application: Stabilization
• Output Type: AC Single Phase
• Power: 10-15kw
• Warrenty: 2years
• Feature: Auto Cut, Easy Operate, Stable Performance, Works In Low Voltage

The Technology concept of Differential wound linear regulator with Series Transformer in RED PHASE’S make Automatic Voltage Controller. We are manufacturing Industrial type Automatic Voltage Regulators (Stabilizers/Rectifiers) using the differential wound Vertical Roller Type Regulators. Manufacturing LINEAR TYPE +/- Heavy Duty Regulators with rollers rolling on both the sides of the coil (as illustrated in the brochure enclosed). The size of conductor used is more than THREE TIMES than used in conventional design regulators. Being + type, the same winding is used for boosting the voltage on one side and bucking the voltage on the other side of the regulator. So, the rating of the regulator required is half of the conventional design regulator. The losses of differential wound linear regulator should be 1/18th of the conventional type regulator and due to heavy section of copper used in our regulator, overall size is more and practically the losses of our regulator are 1/5th of the conventional type regulator. The manufacturing material cost of differential wound linear regulator is almost more than THREE TIMES the cost of conventional design Regulator. As per the Regulator design, the regulator is technically OUT OF CIRCUIT, When the input voltage is LOWEST/HIGHEST as per the voltage range of the stabilizer while in stabilizer with conventional brush type regulators, the regulator is maximum in the circuit and losses are maximum at LOWEST/HIGHEST as per the range of the stabilizer. The Actual Efficiency of our stabilizer in running conditions at 100% Load for the (360-460 V) model will be 99.5% in comparison to less than approx. 95-96% of conventional type stabilizer for the Automatic Voltage Controller of similar rating.

• Grey: Light Green
• Digital display: 5 Years warranty

We are manufacturing industrial type automatic voltage regulators (servo stabilizers rectifiers) using the differential wound vertical roller type regulators. Manufacturing linear type +- heavy duty regulators with rollers rolling on both the sides of the coil (as illustrated in the brochure enclosed). The size of conductor used is more than three times than used in conventional design regulators. Being + type, the same winding is used for boosting the voltage on one side and bucking the voltage on the other side of the regulator. So, the rating of the regulator required is half of the conventional design regulator. The losses of differential wound linear RED PHASE’ series of Servo voltage stabilizers offer a reliable and tested economic solution to inconveniences caused by voltage fluctuation. To use ‘RED PHASE’ SCVR is a real investment because the elimination of the inconveniences means a reduction in costs and an increase in productivity. Very often it is only necessary to avoid a few minutes machine downtime or just one failure to repay the cost of the stabilizers. ‘RED PHASE’ SCVRs are particularly suitable for applications that require: Silent Feature High reliability   Capability to compensate wide mains voltage variations   High precision of stabilized voltage    Stabilizing of high power services    Simple and limited maintenance   Networking ‘RED PHASE’ SVS regulate through a series transformer. A micro based control circuit drives the variable autotransformer that supplies the required voltage to the series transformer either in phase or phase opposition to bring the mains to the rated value. Unbalanced Load models that, having three separate control circuits, individually regulate each phase and are therefore suitable for unbalanced lines and load unbalance between phases up to 100% phase opposition to bring the mains to the value. Unique Features RED PHASE has developed state of art DSPIC based controller to stabilize utility voltage. Apart from its standard feature it has following unique features to improve reliability, serviceability and reduce system down time.  

We are offering servo voltage stabilizer.our organization supplies and exports very efficient servo voltage stabilizer. We understand that in most industries, even a minor fluctuation in voltage can cause the equipment to malfunction or break down. Therefore, our servo controlled voltage stabilizer efficiently controls the fluctuations in the input voltage and provides constant output voltage with +/- 1% accuracy. It also helps in reducing mdi and save power. The vener7 range of stabilizers is known for their consistent performance and the tremendous benefits they bring to the businesses. Our stabilizers are available from 5 kva to 2000 kva in 3-phase and 1kva to 100 kva in single phase. applications information technologyprocess control equipment (nc/cnc machine, plastic moulding machine etc.)all electrical / electronic equipment (motors, lighting, electrical oven, furnace etc.)medical equipment (cat scan, x-ray machines, physiotherapy etc.)data processing equipment (computers)food processing industrychemical plants, cement plants & textile unitsheavy engineering industries (railway, defence etc.)air conditioningcommercial building & complexescommunication & broadcasting equipmentprinting & packaging industries core core is made from best grade imported cold rolled grain oriented silicon steel lamination with the latest technique of annealing. Interleaved and mitered joints reduce the core losses and magnetizing current considerably. Core is specially designed to sustain over-fluxing up to 12.5%. Core is clamped with steel channels rigidly to reduce the cartite sound level and earthed with electrical grade copper sheet. winding the winding cab be of any type (i) spiral (ii) crossover (iii) helical (iv) disc, designed to withstand the optimum electrical, mechanical, dynamic and thermal stresses depending upon the current and voltage. The coils are wound with electrolytic grade high conductivity, annealed wire and strips covered with high quality insulation. All coils are reinforced, insulated to withstand the effect of short circuits and impulse voltage shocks. Cooling ducts are provided to minimize the hotspot temperature and temperature gradient between winding and oil. insulation and oil the insulation material like pre-compressed boards, blocks, corrugated cylinders, bakelite tube, insulating tapes, empire sleeves, glass sleeves varnish, epoxy bushing, porcelain bushing etc. Are used of best quality to ensure long life to the transformers. Oil used as a coolant and insulating medium is of the best quality conforming to is: 335. Before filling into filtration plant’ and tested to ensure free from moisture and dust. tank and radiator the tanks are made from premium quality mild steel sheets, plates and pipes by electrical welding. Proper bracing and stiffeners are provided for robust construction. The tank are tested at specific pressure for leakage at joints/welds. Sufficient cooling radiators are provided for maximum dissipation of heat during extreme ambient temperatures. The radiators are made from best grade pressed steel fins or elliptical tubes. painting tank surface exposed to atmosphere is painted with two coats of red oxide paint to provide maximum resistance to corrosion and two coats of epoxy based anti-corrosive enamel paint. Surface in contact with oil is treated with two coats of ‘oil and heat resistant paint’. This paint has more effective resistance compared to ordinary enamel paint against corrosion and oil/heat reactions. vector group various vector groups can be provided as per demand. temperature rise our transformers are designed for maximum temperature rise at full rated load 40 degree c/50 degree c for oil/winding for aluminium wound transformers and 45 degree c/55 degree c for copper wound transformers. overloading our transformers are designed for overloading excess than normal rating as per is:6600. fitting and accessories standard fitting recommended in is 2026-1977 are provided. Extra fittings like buchholzrelay, dial type thermometer, winding temperature indicator, marshalling box, h.v. & i.v. Cable boxes, prv and osp are provided as per the requirement of the customers.

Code:  R 08 Indications:OsteoarthritisUnstable Knee joint.Meniscus injuries.Degenerative deformities of the Knee joint.To prevent Hyper extension of the knee Joint. Special features:* Sleeve type design.* Has a patellar opening in the front with patellar stabilizer.* Made from quality thicker neoprene with good four way stretch capability.* Material  provides uniform compression in various positions of the knee joint and for perfect fitting.* Soft and comfortable brace.* Has two hinges on the lateral side to prevent the hyper extension movement of the knee joint.* Opposing velcro straps above and below the patella opening for extra stability* Full free movement for the knee jointSizes available:Small, Medium, Large & Extra Large.The height of the product is identical  in all sizes.

Static stabilizer provides a reasonable improvement to slow the stabilizer servo controlled stabilizers and other static tap changing. This technique does not cause di dt problems, why do not you turn on the path. The basic topology with a buck-boost transformer high-voltage ratio of primary and secondary correction of ± 25%. Control voltage is set to the primary of this buck-boost converter. Buck and Boost voltage enabled topology is obtained electronically, without a change of pitch of tension that occurs when the system is governed. This task is successful and the feedback control system implemented using a microcontroller.

Owing to immense experience in this domain, we became efficient in providing quality Servo Voltage Stabilizer. We have high-tech and spacious storage unit that is incorporated with all required amenities vital for a safe storage of the products till the final send off. Supervised by efficient personnel, they ensure zero damage to the items to keep up the standards.

• EN-COAT: Partially Hydrolyzed Polyacrylamide(PHPA)
• EN-TROL G: Thermoplastic Resin
• EN-TROL / EN-THINCAKE: Modified Hydrocarbon
• EN-BORE COAT: Modified Gilsonite
• EN-POLY AMINE: Polyamine
• EN-CPG: Cloud Point Glycols ( Low, Medium & High)
• Storage: Cool & Dry Place
• Grade: Parma
• Purity: 99%

We introduce ourselves, as POWERLINE Solutions, Based in Chandigarh, committed to provide complete power solutions at reasonable prices with High Quality Products. We provides the sales and services in Chandigarh, Punjab, Haryana, Himachal Pradesh, Jammu & Kashmir, Uttarakhand, Haryana, Delhi NCR and other states of India. POWERLINE Solutions is the leading provider for critical power solutions and services, our core business is the sales and services as below. Our products range includes, Ø     Emerson/VertivOnline UPS systems up to 6400 KVA. Ø     Servo Voltage Stabilizers up to 3000 KVA. Ø     Batteries (Make Exide / Rocket / Quanta).   Ø     Isolations transformers / Industrial Inverters Ø     Electricals panels / Industrial Battery chargers. Ø     TVSS (Transient Voltage Surge Suppressor). Ø     Smart Solutions, Server rack compact integrated data centre solutions. At POWERLINE Solutions we ensure you get the most effective economic and environmentally friendly power solutions available.

soil stabiliser, cement additives

Servo Voltage Controller, Servo Voltage Stabilizer, Inverter, Solar UPS

We can supply voltage stabilizers for window & split air - conditioners in bulk quantity at most competitive rates.

Servo Voltage Stabilizer, Tractor & Tractor Parts, It Outsourcing Services

Servo Stabilizers, Inverter, Battery, Offline Ups

Stabilizers

Servo Stabilizer, Dry Type Distribution Transformers, oil circuit breakers

Servo Voltage Stabilizers, Isolation Transformers, Battery Chargers

Stabilizers, mcbs, MCB Boxes, Switch Gears, bus bars, Cables, Wires

Static Voltage Stabilizer

Servo Voltage Stabilizer, ups systems, Isolation Transformers, Stabilizer

Voltage Stabilizers

Servo Stabilizer, Ball Bearing, CNC Machine, CNC Machine Parts

voltage stablizers, Silent Generator, Electric Motors

Servo Stabilizers, electrical line chokes, Electrical Stabilizers

Servo Stabilizer, Sealed Maintenance Free Battery, Uninterrupted Power Supply

Servo Stabilizers, Inverter

Ice Cream Stabilizer, Tutti Frutti, Cake premix, Whipped Topping Cream

ac stabilizers, Uninterruptible Power Supply, Stabilizers, Solar Inverters

Stabilizers, Inverter, batterys chargers, Solar Charger, Industrial Timer

Servo Controlled Voltage Stabilizer, Battery Charger