Cutter Pumps Dealers

• PH value in water: 4-10
• Maximum fluid density: 1.2*103Kg/m3

Cutter Pump which is shaped to prevent suspended solids over a certain size from entering the pump. Since the impeller is retracted with respect to the cover, water entering the front chamber lying between these two components assumes a vortex motion and is centrifuged in to the ring chamber leaving the pump via the delivery opening.

• Type: Sewage Pump
• Material: Cast Iron, Iron, Stainless Steel, Steel
• Application: Industrial
• Color: Black, Blue, Grey, Orange, White, Yellow
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1 Year, 2 Years

Cutter Pump Dirty water Pump with Cutter systemPerformance Range Flow rate up to 300l/min.[18m/3h] Head up to12m Operation Limits Maximum operating depth 5m below water level Maximum fluid temperature up to 40°C Maximum passage for suspended solids 10mm PH value in water: 4-10 Maximum fluid density: 1.2*103Kg/m3 Working Performance V Pumps are submersible vortex pump for dirty water, designed mainly for domestic use and industrial use. Their operating principle is that of a centrifugal pump with a retracted vortex impeller. A large size ring chamber with a threaded delivery opening is machined in the pump body and closed by a cover, housing the suction opening, which is shaped to prevent suspended solids over a certain size from entering the pump. Since the impeller is retracted with respect to the cover, water entering the front chamber lying between these two components assumes a vortex motion and is centrifuged in to the ring chamber leaving the pump via the delivery opening.Pump Installation and ApplicationV pumps are designed to lift dirty water which is not chemically aggressive to the pump components. In all cases where suspended solids up to 35mm have to be dealt with. Recommended applications therefore include draining flooding in confined areas such as basements and garages also pumping domestic waste and the disposal of waste water containing fibers matter and are also widely used in many factories. These pumps are easy to install and dependable when used automatically in fixed installations. This system with float switch automatically starts the pump when the fluid reaches a pressure level, stopping it once the fluid has been emptied. Installing a suitable non return valve on the delivery pipe prevents reverse flow when the pump stops.Structure Characteristics Stainless steel: Pump body Stainless steel: mechanical seal Stainless steel: shaft Cast iron impeller with cutter

• Application: Industrial
• Weight: 250-300kg
• Voltage: 220V
• Structure: Single Stage
• Warranty: 2years
• Brand Name: Dragflow

The DRAGFLOW Dredge Cutter head is a custom engineered system. DRAGFLOW's dredging specialists carefully analyze customer requirements and operating conditions to arrive at the design criteria - cutter profile, size, beta, arm quantity and shape, tooth size, tooth orientation. What is more, the combination of the Cutterhead with the agitator avoids any clogging problem at the pump suction. DRAGFLOW 's Cutterhead can be used with every DRAGFLOW's Hydraulic Pumps and can increase the efficiency particularly in presence of hard and compact material.

• Power: 3.2 kW
• Motor Phase: Single Phase
• Frequency Hz: 50/60 Hz
• Voltage: 360 V
• Frequency: 50 Hz
• Usage/Application: Industrial

• Motor Phase: Three Phase
• Model Number: JSDK 5-75
• Material: Cast Iron, SS
• Voltage: 400 V
• Power: 7.5 HP
• Frequency: 50/60 Hz
• Brand: Toshio
• Air Flow Range: 1100 LPM
• Liquid Temp: 5 - 40 deg celsius
• Discharge: 4 inch
• Max Head: 12 m
• Free Passage: 28 mm

• Type: Self Priming Non Clog Pump
• Application: Industrial
• Weight: 10-20kg, 30-40kg, 40-50kg
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Automatic Grade: Manual, Automatic
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Driven Type: Electric
• Warranty: 1year, 2years

The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable. Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs. The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

Designed with special cutting impeller made of hardened steel material and leading edges of the impeller brassed with carbide are tool tips. The pump is designed for Gray water pumping, Sump emptying, Septic effluent, Pumping of waste water with soft solid in suspension, hard dirt, Rubber materials, resin and plastic. Cutter pumps deliver energy of motion to slurry solids surrounding the pump intake, re-suspending them into a fluid state. These solids, which would have been otherwise buried and starved the pump of liquid, are pulled into the pump and pushed on through the discharge keeping the intake clean and free of slurry accumulation.

• Brand: Crompton
• Head: 0-5 m
• Usage/Application: Industrial
• Material: Mild Steel
• Motor Phase: Single Phase

• Type: Portable
• Certification: CE Certified
• Voltage: 220V
• Automatic Grade: Semi Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year

Customers can contact us for obtaining superior grade BRUSH CUTTER WATER PUMP AG02-YWC18 at the most competitive prices. Our team members inclusive of quality auditors make complete quality analysis of the product before final dispatch.

Cutter Pumps feature the unique pushed-out rectangular design features of the Cornell frame will let you know it is Cornell pump. Look for the distinctive appearance of the angular, muscular frame, to know it’s a high quality Cornell pump.

• Motor Phase: Single Phase
• Brand: cnp,lubi
• Head: 10-15 meter
• Max Flow Rate: 35000lph
• Discharge: 80mm
• Motor: 2 hp

• Type: Submersible Pumps
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: Diaphragm Pump, Gear Pump, Single Stage Pump
• Warrenty: 1 Year, 2 Years

• rang: 2 m cube/hr to 18 m cube/hr.

Sewage multistream pumps-cutter pumps ranging from 2 m cubehr to 18 m cubehr. Of head 54 to 6 meters. Less maintenance, Quality approved, Noiseless operations.

• Power rating: 2.0 to 7.5 HP
• Speed: 2900 RPM

Ideal for Waste Water applications containing soft or fibrous solids. Waist Water treatment. Septic effluent. Industrial Waste Water. Ground Water drainage. Miscellanceous drainage. Hotels,Food Proceessing sludge.

• Brand :: CROMPTON GREAVES
• Power Rating(HP): No

Impellers: Vortex Can handle long fibrous solid effectively Highly efficient and reliable cutter mechanism Applications: Construction Sites Swimming Pools Food Processing Industries Hotels and Restaurants Paper Mills Sewage Treatment plants Waste Water Treatment Plants