Wind Tunnel Dealers

• Working Test Section: As required
• Area Size: Square at test section
• Contraction Ratio: 9
• Overall Length: 29’ 6”
• Air Velocity Range: 3 - 30 mtrs/sec
• Flow generation: By Axial Flow Fan.
• D.C. Motor: Open Circuit slow speed, subsonic Wind Tunnel. 7.5 H.P., 1550 RPM.

Wind Tunnels are designed to perform the different types of experiments in Fluid Dynamics, Aerodynamics, model studies & for industrial Design Aspects. The present Wind Tunnel is configured in five parts mainly, inlet or Honeycomb section with graded screens at different intervals, jet or convergent section, Main Test Section Unit, Diffuser or Divergent Cone, Fan with Motor. The Tunnel is open Circuit type having a square test section of 300 x 300 mm. It has a contractiaon ratio of 9 & honeycomb & screens at inlet. The maximum speed in this section with a 7.5 HP electric motor drive is about 30 mtrs/sec. Smooth & continuos variations of speed are provided over a wide range by means of aerodynamic speed control (Flap) mechanism combined with variable speed drive of the electric motor. A fixed pitch 4 bladed metal/wooden fan coupled to the electric motor by suitable couplings derives the tunnel. The entire tunnel expect the motor support structure is wooden construction. Large Plexiglas windows provided on both sides of test section permit easy accessibility for model mounting etc. Necessary static pressure connections for measurement of Tunnel speed have been provided

• Operational stagnation pressure: 8 bar
• Volume of storage tank: 3 ft dia X 7 ft length X 2 no
• Steady state run time: 30 seconds
• Air receiver tank: 2500 ltr (vertical)
• Product Code: ELSHADDAI - 0777

• Voltage: 230V
• Color: Blue
• Country of Origin: Made in India
• Power: 5 HP
• Phase: Three Phase
• Speed: 3000RPM
• Wind Tunnel: 300mm x 300mm x 1000mm

Volume flow1.000.000 m³/h Pressure 2.500 Pa Temperature 100 °C Output800 kW MiscellaneousCarbon blades, moulded steel blades, blades adjustable at a standstill

• Type: Wind Tunnel
• Material: Stainless Steel
• Application: Industrial Use
• Color: Blue, Green, Silver
• Voltage: 230 V
• Condition: New, Used
• Power Source: Electric
• Phase: Three Phase
• Frequency: 0-50 Hz

• Phase: 3 phase
• Color: Blue
• Length of Tunnel: 4/5 meter
•  Motor: 7.5 HP
• Brand: SUPER-TECH

• Dimension: 3500x810x1715mm Schlieren app. 2x1710x5 80x1450mm
• Speed: 55kW f 400V, 3

Supersonic Wind Tunnel Continuously operating open supersonic wind tunnel Tunnel 3500x810x1715mm Schlieren app. 2x1710x5 80x1450mm Operating on vacuum principle Cross area of working section: 100x25mm 4 Aerofoil models: wedge, double wedge, rocket, bullet Schlieren Apparatus to observe flow patterns [8] 3 interchangeable test sections for different Mach numbers: subsonic, Mach 1.4, Mach 1.8 Multitude manometer 25 fold Speed controlled vacuum pump 55kW f 400V, 3~50Hz.

• PRODUCT CODE: OTHER DETAILS
• VTUN-RO2M2P: Made of 2 mesh & 2 plain panels
• VTUN-RO4P: Made of all plain panels
• VTUN-RO4M: Made of all mesh panels

Tunnels made of 4 coloured panels in round shape. 2 panels of mesh fabric and 2 panels of plain fabric. Size of Tunnel : 240 cm x 60 cm

• Type: Wind Tunnel
• Material: Stainless Steel
• Application: Industrial Use
• Color: Blue, Green, Silver
• Voltage: 440 V
• Condition: New
• Power: 25 HP
• Power Source: Electric
• Phase: Three Phase

• Phase: Three Phase
• Voltage: 230V
• Power: 5 HP
• Size: 300mm x 300mm x 1000mm
• Speed: 3000RPM

SPECIFICATIONS: 1. Type : Open type Wind Tunnel. 2. Test Section : 300mm x 300mm x 1000 mm. long with two Perspex windows. 3. Blower Fan : 10 blades /nylon fan. 4. Motor : 5 HP D.C shunt motor, 1500rpm. 5. Speed Controller : 3 phase, thyristor controller to give smooth Speed control. 6. Air Velocity : In test section - 1 to 25 m/sec. 7. Duct : Manufactured out of ms sheet. 8. Length of Tunnel : 7 meter Aprox. 9. Manometer : 15 tube acrylic manometer with inclination arrangement. 10.Pitot tube   WOODEN MODELS: 1. Aerofoil: a) Symmetrical b) Unsymmetrical. 150mm width and 250mm long with    15 piezometric tapping with 0-360 degree protractor. 2. Cylindrical Model: 75mm, dia., 250mm long with piezometric tapping and    0-360 degree protractor. 3. Spherical Model: - 100mm, dia.   Lift & Drag Indicator 1. Lift Display: - 3 1/2 Least count: - 0.1 kg Range : - 6 kg 2. Drag Display: - 3 1/2 Least count: - 0.1 kg Range : - 6 kg

• Type: Open type Wind Tunnel.
• Test Section: 300 mm x 300 mm x 1000 mm. long with two Perspex windows.
• Blower Fan: 3 /10 blades /nylon fan.
• Motor: 7.5 HP D.C shunt motor, 1500 rpm.
• Speed Controller: 3 phase, thyristor controller to give smooth Speed control.
• The length of Tunnel: 4/5 meter.

• Type: Open type Wind Tunnel.
• Test Section: 200mm x 200mm x 700 mm. long with two Perspex windows.
• Blower Fan: 3 /10 blades /nylon fan.
• Motor: 3 HP D.C shunt motor, 1500rpm.
• Speed Controller: 3 phase, thyristor controller to give smooth Speed control.
• Air Velocity: In test section - 1 to 20 m/sec.
• Duct: Manufactured out of ms sheet. 10 tube manometer

This is an open circuit Wind Tunnel which provides a region of controlled airflow into which models can be inserted. The propulsion is provided by a fan at downstream of working section. The tunnel consists of bell mouth shaped entry to guide the air smoothly into settling chamber consisting of honeycomb and nylon mesh screens which filters and stabilizes the air flow. This follows working section or test section where various models can be tested. Two windows with acrylic sheet one each on either side will be provided for visual observation. Working section is followed by diffuser section, which reduces the dynamic pressure at the exit. A three -blade fan coupled with D.C variable speed motor is used to produce desired wind velocity. A thyristorised motor control is used for smooth variation of air velocity. Wooden Models Aerofoil: a) Symmetrical b) Unsymmetrical. 150mm, width and 250mm.long with 15 piezometric tapping with 0-360 degree protractor. Cylindrical Model: 75mm, dia., 250mm long with piezometric tapping and 0-360 degree protractor. Spherical Model: - 100mm, dia.   Lift & Drag Indicator Lift Display: - 3 1/2 Least count: - 0.1 kg Range : - 6 kg Drag Display: - 3 1/2 Least count: - 0.1 kg Range : - 6 kg

• Material: m.steel
• Voltage: 220V
• Power: 7HP
• I deal in: New Only
• Weight: 100KG
• Speed: 60m/s
• Dimension: 600*600mm

Subsonic Wind Tunnel with following specifications and Accessories; 1. 72m/sec velocity Blower M.S fabricated 2. 300mm X 300mm Test Section 3. Pitot Static tube 4. 20 Tube manometer 5. Airfoil model with 20 tapings 6. Cylindrical model with tapings7. Strain gauge setup to measure lift and Drag

• Application: Industrial Use
• Country of Origin: Made in India
• Speed: Customized
• I Deal In: New Only

• Material: WOOD
• Phase: 3 PHASE
• Power Source: ELECTRIC
• Voltage: 440V
• Condition: New
• Brand Name: IND -LAB MAKE
• Model Number: AEL-01
• Model Name/Number: AEL-01
• Size: 300*300*600
• Speed: 2800
• Speed (RPM): 2880
• Accuracy: 100%
• Air Velocity: 60M/S
• Dimension: TOTAL 5.5 METER
• Material Grade: WOOD
• Power (HP): 10 HP
• Temperature (deg. Celsius): 50
• Voltage (V): 440
• Weight (kg): 400
• Minimum Order Quantity: 01 Piece

Blower, Balance And Small Aspect Ratio Model, Water Flow Channel, Subsonic Wind Tunnel, Manometer – Pilot Static Tube, Circular Cylinder & Aerofoil Pressure Distribution Models, Wind Tunnel Strain Gauge Balance, Supersonic Wind Tunnel, Mercury Manometer, Schlieren System & Shadow Graph System, Sharp Nosed And Blunt Nosed Models.

• Floor area: 10m. X 5m. approx.
• Power Supply: 3 Phase, 15Amp, 440V.

This is an open circuit Wind Tunnel which provides a region of controlled airflow into which models can be inserted. The propulsion is provided by a fan at downstream of working section. The tunnel consists of bell mouth shaped entry to guide the air smoothly into settling chamber consisting of honeycomb and nylon mesh screens which filters and stabilizes the air flow. This follows working section or test section where various models can be tested. Two windows with acrylic sheet one each on either side will be provided for visual observation. Working section is followed by diffuser section, which reduces the dynamic pressure at the exit. A three -blade fan coupled with D.C variable speed motor is used to produce desired wind velocity. A thyristorised motor control is used for smooth variation of air velocity. SPECIFICATIONS : Type : Open type Wind Tunnel. Test Section : 300mm x 300mm x 1000 mm. long with two Perspex windows. Blower Fan : 3 /10 blades M.S. /nylon fan. Motor : 7.5 HP D.C shunt motor, 1500rpm. Speed Controller : 3 phase, thyristor controller to give smooth Speed control. Air Velocity : In test section - 1 to 30 m/sec. Duct : Manufactured out of ms sheet. Length of Tunnel : 4/5 meter. INSTRUMENTATION: LIFT & DRAG INDICATOR - Lift - Display: - 3 ½ digit, Least count: - 0.1 kg Range : - 20 kg Drag - Display: - 3 ½ digit, Least count: - 0.1 kg Range : - 20 kg MANOMETERS: - Multitube Manometer : 500mm. Height, 500mm, width, 15 pvc tubes, 6mm, dia, Pitot tube : 100cm. Long chrome plated pipe tube, 3/8” dia. WOODEN MODELS :- Aerofoil: Symmetrical Unsymmetrical. 150mm, width and 150mm.long with 15 piezometric tapping with 0-360 degree protractor. Cylindrical Model: 75mm, dia., 150mm long with piezometric tapping and 0-360 degree protractor. Spherical Model: - 65mm, dia. EXPERIMENTATION :- To study pressure distribution around a) Aerofoil b) Cylinder. To measure lift & drag on airfoil model, cylinder model & sphere model.