about-us1 THE WAY. Ambattur, Chennai, Tamil Nadu

THE WAY UV Sterilizers are built on the property of UV radiation at 2537 Angstorm units capable of striking bacteria, algae, fungi & protozoa & rendering them harmless.  The UV units are built with high efficiency UV lamps surrounded by Quartz glass sleeves to isolate the bulbs from water contact preventing thermal shock, glass breakage & mercury contamination.  The sleeves also ensure very high transmission of UV energy with lesser losses.  A wiper assembly is provided for periodic cleaning of Quartz glass from 1500 lph model onwards.  An Electronic Ballast operating on 230V, single phase, 50 Hz AC triggers the UV bulb and ensures minimum power consumption.  The design is based on 30000 micro watt sec/sq.cm. dosage of UV radiation which destroys significant water-borne pathogenic micro-organisms effectively. Technical Details UV RADIATION AT 2537 ANGSTORM, QUARTZ GLASS SLEEVES ENSURE VERY HIGH TRANSMISSION OF UV ENERGY. THE DESIGN IS BASED ON 30000 MICRO WATT SEC/SQ.CM DOSAGE OF UV RADIATION

Ultra Filtration Plants are used in PRE-Ro applications  to reduce Turbidity and protect RO Systems, Concentration in Fruit juice / Food Industry, Separation in Oil / Pharma Industry. Ultra Filtration  Plants  are built using Hollow Fibre Membranes to 100KD with  full automatic system. Membranes to other MWCO are used for specific applications. Filtration, Backwash & Flush  – both upward & downward direction and with Air Scouring Facility through Automatic Valves, level  &  pressure controls are provided. Skid Mounted Systems inbuilt with CEB and Dosing Systems. Automation through Auto controller, PLC, HMI, Touch Screen/ Mimic Panel, Scada Technical Details DESIGN BASED ON SOURCE WATER QUALITY, REQUIRED OUTPUT WATER CHARACTERISTICS. FLUSH, FILTRATION AND BACKWAASH – UP & DOWN CYCLIC OPERATIONS CEB SYSTEMS AND DOSING SYSTEMS INBUILT IN SKID LEVEL, FLOW, PRESSURE INSTRUMENTS PROVIDED BUILT WITH OUT-IN FLOW OR IN-OUT FLOW UF MEMBRANES

Self Cleaning Filters protect UF Membranes & ensure longer life of Heat exchangers, Spray Nozzles, Pump, Chillers by reducing particle load. These Self Cleaning Filters are introduced before the UF Plant and are designed based on the Flow rate, System Pressure & TSS in water source. The Self Cleaning filters operate automatically & ensure uninterrupted flow as no down time is required separately for cleaning the filter. Technical Details SS Wire Mesh Basket Element with IN to OUT flow with 100 microns Fineness (or as required) with perforated support Wire Brush for cleaning the clogged inner surface mounted on a central shaft Motor with Gear Reduction Unit driving the wire brush All the above mounted on SS/MS housing with leakproof sealing

The Way RO Systems are manufactured in Modules for various flow rates using Thin Film Composite Spiral Wound Membranes (Brackish Water & Sea Water Membranes). The Systems are designed taking into consideration Feed contaminants, Pre & Post treatment, Product Stream requirement, Maximisation of Recovery, Flow characteristics etc., and a thorough Technical evaluation supported by Computer Analysis & Past experience. Quality Components are used in building the Systems to ensure Efficiency, Ease of Operation, Long life & Aesthetics. Standard Modules available for 150lph to several Million Lakh liters per Day (MLD). Other Modules on request.   DESIGN BASED ON SOURCE WATER QUALITY, REQUIRED OUTPUT WATER CHARACTERISTICS AND OPTIMUM RECOVERY CIP SYSTEM, CEB SYSTEM AND DOSING SYSTEMS INBUILT IN SKID PH, CONDUCTIVITY, LEVEL, FLOW, PRESSURE INSTRUMENTS PROVIDED  

Post Treatment – refers to the water treatment processes that take place downstream of the Reverse Osmosis Plant System. Post-treatment processes often include disinfection using Micron Catridge Filters, Ultraviolet Sterilisers and Ozonators. It consists of SS Storage Tank and various stage of micron filters followed by UV & Ozonators.   DISINFECT WATER MAKING IT SUITABLE FOR THE PURPOSE THROUGH UV RAYS & OZONATION.

Oil Skimmers are used to skim floating oil on water surface.  They find an application in areas such as, ETP HYDRAULIC OIL MIX-UP IN COOLANT TANKS OIL ACCUMULATION IN EFFLUENT COLLECTION SUMPS DEGREASING BATHS IN PLATING TANKS OIL FROM COMPONENTS IN INDUSTRIAL CLEANING MACHINES Skimmers are available either as “DISCS “, “BELT”, “TUBE”, “CHAIN” , “ DRUM”, “FLOATING WIER”.  Disc Skimmers are used in applications where the variation in water level are low and collection thanks are smaller – such as Cleaning Machines & Degreasing Baths.  Belt Skimmers are used in applications where the variations in water level are high and tanks are bigger and deeper – as in effluent Collection tanks. Chain Skimmers are used for removal of floating Oil, Grease, Scum, Algae and Debris across large surface area of tanks. They are also used along with DAF systems. Tube Skimmers are used when quantity of oil removal required is relatively low with respect to surface area of tank. Drum Skimmers and Floating Wier Skimmers are used for Oil Slick removal in large Ponds, Rivers, Oceans. They are optionally used along with Towing Boats and Oils Booms.  

Used in Pre Filtration for RO. MOC of housings FRP/MSRL/MSEP. Flow rates 500lph to 200m3/hr. Media used Pebbles + Sand, Activated Carbon Granules , Green sand / MnO2, Softener resin. Sand filtration is frequently used and very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of sand with a variety in size and specific gravity. Sand filters can be supplied in different sizes and materials both hand operated or fully automatically.The filter will effectively remove up to 30 – 50 micron of the suspended solids to less then 5 ppm. The filter will have to be washed with raw water for 20 to 30 minutes daily. To filter the Activated Carbon Water Filter Fiber Glass Reinforced Plastic (FRP) composite vessels are 1/3 the weight of carbon steel, strengths are directly comparable to steel, no maintenance & high aesthetic appearance. High performance Composite material Thermoplastic liner of polyester – wall thickness 3.8 mm to 7.6 mm as per vessel diameter 100 % corrosion resistant Excellent bonding between inlet & PE liner Better curing at high temperature 200 mm to 1,000 mm diameter partials below 30 – 50 micron cartridge filter is used. Applications for sand filtration :• Preparation of cooling water• Treatment of waste water• Production of drinking water• Filtration in swimming pools• Pre filtration for membrane systems• Filtration of gray or surface water• Swimming pool water

Filter cart is used for removal of suspended Particles from Water in various applications.  Multiple stages of filtration systems are mounted on a mobile platform and hence can be moved from Process Tank to Process Tank.  

Centrifuge Filters handle tough process demands, heavy filtration applications and liquid-solid separations in which the specific gravity of suspended solids are greater than that of the liquid. It is used for liquid-solid centrifuge separation, solids dewatering, and centrifuge liquid filtration and fluid clarification. Each machine is handcrafted by technical engineers, can be customized and guarantees a solid, durable and flexible machine for various industrial applications. All machines are economically priced and available in standard MS Powder coated or stainless steel construction. Centrifugal forces can max out up to 1,500 times gravity with manual centrifuge systems. Centrifuge Systems provides innovations in  liquid-solid centrifuge separation, solids dewatering, and centrifuge liquid filtration and fluid clarification systems technology with more performance enhancing design features than any other manufacturer Technical Details CENTRIFUGE FILTERS WORKS ON THE PRINCIPLE OF HIGH CENTRIFUGAL FORCES ( > 1000G) ACTING ON PARTICLES IN A LIQUID MEDIUM ROTATING INSIDE A DRUM AT HIGH SPEED. SUCH FINE PARTICLES GET DEPOSITED ON THE INNER WALLS OF THE ROTATING DRUM. FILTERED LIQUID RASIES UP AND IS DIRECTED TO THE OUTLET PORT. PARTICLES ON THE WALLS FORM CAKES WITH HIGH CONCENTRATION (60 TO 80% OF WET SOLIDS ) AND ARE WIPED OFF FOR DISPOSAL OR REUSE.

Cartridge Filters and Housings Standard Single Housings in PP & SS from 10” to 40” – both for slim & jumbo cartridges. Multi cartridge Housings for large flows in MSEP/MS POWDER COATED/SS/SS316 Micron Cartridge Filters of PP Wound, Spun, Pleated and Resin Bonded from 0.2 microns to 100 microns and in lengths of 10” to 40” and 2.5” & 4” diameters. Special Cartridges such as Carbon Block, Softner, Code 7 type etc are also available. Technical Details CARTRIDGE HOUSINGS PROVIDED TO ACCOMODATE MICROFILTRATION FILTER CARTRIDGES IN INDIVIDUAL HOUSING OR MULTIPLE CARTRIDGES IN SINGLE HOUSING. SIMPLEX OR DUPLEX MODELS AVAILABLE .  

Simplex Housings , Duplex Housings and Multi Bag Filter Housings for large flows in MSEP/ MS Powder Coated / SS and MS from 4”X 8”, 4” x 14”, 4” x 20”, 7”x16” & 7”x32”. Bag Filters of PP/ Polyester nonwoven – welded and stitched, sizes of 4”x 8”, 4” x 14”, 4” x 20”, 7”x16” & 7”x32” and in micron ratings of 1 to 100 microns. Technical Details BAG FILTER HOUSINGS PROVIDED TO ACCOMODATE MICROFILTRATION FILTER BAGS IN INDIVIDUAL HOUSING SIMPLEX OR DUPLEX MODELS AVAILABLE MULTIPLE BAGS IN SINGLE HOUSING