AC Drive Control System Dealers in Mgr Nagar, Chennai

• Brand Name: VISHWA
• Frequency: immediate
• Standard: IP65
• Model Number: 0003
• Place of Origin: Chennai
• automatic power factor panel: 100000

Automatic power factor panel . Panel shall be designed to customer requirement and depending upon electrical load details.

With our years of experience, our company name figures amidst the most responsive and responsible Suppliers of electrical panel board accessories. Interested buyers can contact us anytime for placing orders; we ensure timely delivery of the same.

• Application: Office
• Brand Name: MIRCOM
• Model Number: Fx2000
• Voltage: 24 Volt
• Frequency: 50 Hz
• Material: MS Powder Coated Body
• Color: RED
• Zones: 2 Loop
• IP Rating: IP50

• Power: 1-5 KW
• Voltage: 415V
• Ambient Temperature: 42 Degree C
• Material: Mild
• Frequency: 50Hz
• Current: 40 A
• Relative Humidity: 98%
• Surface Treatment: Paint Coated
• Ip Rating: IP65

• Type: Alarm Panel
• Model Number: RE 104
• Application: Office
• Frequency: 50 Hz
• Material: MS
• Weight: Up to 800 gm
• Brand Name: Ravel
• IP Rating: IP50
• No Of Relays: 3
• Power Supply Type: 230 VAC
• Common Relays Type: Form C
• Relay Contact Rating: 2Amps
• Relative Humidity: 93 +- 2% RH
• Alarm Current: 15 - 30mA
• Normal Operating Voltage: 14- 21 VDC
• End-Of-Line Resistor: 4.7K,1/4watt
• Standby Current: 6.8mA
• Dimensions: (350W X 250H X 100D)

We offer AMF Panels which are heavily used in foundries, apartments, textile and other varied industries. We offer amf panels, electric amf panels, amf power control panels, amf control panel. Manufactured from high grade raw material, these amf electric control panels can be availed with various functions and timers that facilitate efficient functioning of AMF panels. Our range of amf panels can be customized as per the client's specifications.

• Average PUF Density: 40 ± 2 Kg/ cu.mtr/ m³
• PUF Blowing Agent: 141B (CFC free)
• Insulation Material: Polyurethane foam
• Polyurethane foam: +90°C to -60°C
• Penal Type: Discontinuous type with cam lock
• M.O.C. Of Cam Locks: Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement
• Type Of Panel Joints: Tongue & Groove Joint with Cam lock and all side rubber gaskets
• Corner Panel Available: 12” X 12” X 162”(Maximum Length)
• Length of wall & ceiling panel: 2032 mm to 12000 mm 80” to 472.5” inch
• MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load dis: 90 to 95%
• Vapour Permeability: 5.5mg/PASM.
• 5.5mg/PASM.: Less than 2%
• Less than 2%: Less than 2%
• Compressive Strength at 10% Deformation: 0.21 N/ sq.mm (For PUF only)

• Features: Elegant designs, Negligible maintenance, Long functional life

• Application: Power Distribution
• Power: 2.1kW
• Phase: Single Phase
• Voltage: 420 V
• Body Material: Mild Steel
• IP Rating: IP66
• Frequency: 50 Hz
• Surface Finish: Color Coated
• Automation Grade: Automatic

• Features: Android OS with touch screen control Graphic display available in 7" and 10"

This Fire alarm control panel is a master unit of fire alarm system. Control panel front-end has a interactive display with touch screen control. Back-end has connectivity for fire detection line and audio notification line. Total system works on 24V DC. Panel has built in 230V to 24V power supply unit. This unit has built in battery charger and provision for SMF battery.

• Phase: Three Phase
• Power: Electric
• Material: Mild Steel
• Frequency: 50 Hz

We are engaged in offering a wide gamut of quality approved automatic power factor control panel to our esteemed patrons. These are manufactured using finest quality raw material like metals and other electrical goods that are procured from the most reliable vendors of the industry. our spectrum finds application in several areas such as: * power factor improvement (reducing eb penalty) * md control panels(reducing eb penalty) * automatic change over panel (eb to genset) * available from 20kvr to 1000kvr our range exhibit following salient attributes: * voltage fluctuation resistance * ease of operation * low power consumption * special systems for special applications.

• Material: Aluminium Alloy
• Phase: Three Phase
• Mounting Type: Panel
• Automatic Grade: Semi-Automatic

We are pleased to introduce ourselves as the leading supplier of the above product, which is used to maintain the Power Factor (PF) above a specified limit. ELITE APFC Panel has a Micro-controller based Programmable Controller, which switches the Capacitor banks of suitable capacity Automatically, in multiple stages by directly reading the reactive load (RKVA) which works in the Principle of VAR Sensing, tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. The TNEB is installing the Digital Electronic Energy Meters for Power and Welding Service consumers having 25HP and above, which has the provision of showing the PF and insisting to maintain the average Power Factor above 0.85 Lag.   Install ELITE APFC Panel to avoid penalties and enjoy the benefits automatically.   WHAT IS POWER FACTOR (PF)? Power Factor is the ratio between the energy drawings (KVA) and the effective energy utilized (KW) i.e., PF=KW/KVA   WHY POWER FACTOR MUST BE MAINTAINED? By maintaining a better PF we can reduce the energy drawn (KVA), thus reducing the current passing through the electrical circuits to the maximum extent possible (even up to 50%) thereby reducing the down time, reduction in heat losses in turn increases the life of the equipment. Otherwise, for every reduction of 0.01 from 0.85 up to 0.75 PENALTY is 1% and below 0.75 it is 1.5% from 0.85 of the Current Consumption Charges (KWh) on your Electric Bill. INCENTIVE is also given by the Electricity Board when the PF is maintained above 0.90 @ 0.5 % for every increment of 0.01 on your Electric Bill.   HOW TO MAINTAIN THE POWER FACTOR? According to the load pattern, proper Capacity of Capacitors to be connected. The value of the capacitors to be connected will vary with respect to the load and its existing PF. There are two ways to maintain PF 1. Fixing the capacitors permanently at the load end or at the mains, generally which is recommended for the fixed loads like Pumps, fans etc., and it is not possible for the loads which have variations in the load and PF. 2. The Power Factor can be maintained by installing ELITE AUTOMATIC POWER FACTOR CONTROL PANEL.   ELITE Controller displays the following parameters. Voltage: R, Y & B Phases, Amps: R, Y & B Phases Present KILOWATT (utilizing current) Present RKVA demand (Required capacitors to attain UNITY power factor) Present KVA (drawing current),Present Power Factor (PF normally 0.99lag) No. of capacitor Banks ON or OFF,Provision to indicate Imbalance load Provision to indicate the change in phase sequence AEE’s PF Controller has built-in protections for High voltage cut-off AEE’s PF Controller has built-in protections for Low voltage cut-off The values and stages can be made as per customer’s request Higher Capacity Panels up to 450 KVAR can be supplied against Order IMPORTANT BENEFITS FOR INSTALLING FOR ELITE AUTOMATIC POWER FACTOR CONTROL PANEL Fully Automatic, no Manual Interventions is required. HEAVY Power Factor PENALTIES on the consumptions are ELIMINATED. INCENTIVES are received on every payment made. Optimize the capacity by reducing the maximum demand KVA. Avoids excess demand charges. Considerable REDUCTION in consumptions (KWH) charges. Improvement in line voltages. Excess Drawing of power is absolutely ELIMINATED. Reduced line current losses and cable overheat. Enhanced life of electrical circuits. Avoids overloading of Distribution Transformers. Additional service connections in existing generation of power by reducing energy losses. Reduced line losses benefits SEB’s and Nation. Avail DEPRECIATION as per Income Tax Depreciation Schedule. OUR PANEL COMPRISES OF VAR SENSING CONTROLLER with LCD display to show all the line parameters. 3 Nos of C.V.T’s (Current Voltage Transducers) of ratio 1:400 CAPACITORS of SIEMENS – EPCOS make – MPP type – 440 V / 50 HZ – Delta connected CONTACTORS to switch in & switch out the capacitors of ABB / SCHNEIDER/BCH make fixed individually to all the stage capacitors at 440 V / 230 V AC coil. MCB/ 3 Pole as Incomer of ABB / SCHNEIDER make. Provision of INDUCTOR COIL individually to all the capacitors to cater the in- rush currents. To Maintain the OPTIMUM POWER FACTOR load balancing to be Carried out in your Premises compulsorily. After providing our APFC panel the readings of KWH, KVAH, Pr.PF, Avg.PF from the EB meter has to be given to our office once in a week to monitor the improvement of PF.  

We are identified as one of the most reputed Suppliers of Electrical Control Panels with various technical specifications. Our Industrial Power Control Panel is highly effective to meet all kinds of Industrial needs. Our control Panel is easy to set up and operate. Our Tonnage Monitor and Brake Monitor, display all the units clearly that assures precise reading. With strong manufacturing capabilities, we are able to provide Custom Control Panels in various specifications desired by the clients. In addition to the above facts, we offer these Panels at the most reasonable prices.

Features Designed and Verified according to IEC 61869-2 Various standard product line Suitable for tariff metering Specialised in customised products Compact and light weight Convenient installation and replacement High electrical and mechanical performance No partial discharge at operating voltage Reliable quality and long lasting durability Casting epoxy resin body ensures high mechanical strength and insulation performance Transparent and sealable secondary terminal cover as an option Specification Highest system voltage: 660V to 36kV Rated primary current: 5A to 5000A Rated secondary current: 1A / 5A Rated accuracy class - Metering: 0.2s, 0.2, 0.5, 1.0 - Protection: 5P, 10P Rated short time thermal current: 75In to 50kA/ 1s to 3s Rated frequency: 50Hz Rated continuous thermal current: 120%, 150%, 200%

Our organization offers an extensive range of Pneumatic Control Panels to our clients. With the help of our experts, we offer a superior range of Pneumatic Panels to our clients.These are fabricated using best grade raw materials in accordance with industry standards. Further, our range is engineered with utmost precision to enhance its extensive utilization in pressurized systems in varied industries. It is acknowledged for the easy installation and high performance We offer a high quality pneumatic Control panel duly assembled with world's reputate make like      FESTO,SMC,CAMOZZI etc.... These pneumatic Control panels are customised design and can withstand rugged enviornments like      industrial,mobile, Onshore and offshore application  

HID Global is the trusted leader in products, services and solutions related to the creation, management, and use of secure identities for millions of customers worldwide. Recognized for robust quality, innovative designs and industry leadership, HID Global is focused on creating customer value and is the supplier of choice for OEMs, integrators, and developers serving a variety of markets that include physical access control; IT security, including strong authentication/credential management; card personalization; visitor management; government ID; and identification technologies for a range of applications. HID Global is an ASSA ABLOY Group brand.

• Type: Access Control System
• Material: Aluminium, Plastic
• Application: Cabinets, Glass Doors, Main Door
• Color: Black, Grey, Silver, White
• Voltage: 12volts, 18volts, 24volts, 6volts
• Feature: Accuracy, Less Power Consumption, Longer Functional Life, Simple Installation
• Access Method: Biometric, Digital Keypad, RFID Card
• Acess Storage Capacity: 100-200, 200-400, 400-600, 50-100, 600-800, 800-1000

We are well-recognized as AC Drive Panel Importer and Supplier in Chennai, Tamil Nadu. The technically advanced assortment of AC Drive Panel that we offer is acquired from the leading manufacturers and vendors in China. The AC Drive Panels conform to the latest technologies and are highly dependable. The AC Drive Panel that we offer can easily be integrated to various IT systems. The AC Drive Panels are required for the different industrial applications. Clients can avail AC Drive Panel from us at the most affordable prices. The AC Drive Panel Provides Textile spinning control solutionPump & fan control solutionCrane control solution The AC Drive Panel Is Required In Chemical Industry Metals IndustryMining IndustryCement IndustryPower IndustryOil & gas IndustryPulp & paper Industry

• Type: Solar Panel
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial, Toproof
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power Source: Solar
• Warranty: 1Year, 2Year

ReliGo Solar system started in order to meet the scarcity of electricity in Tamil Nadu and increasing power rates. We offer wide range of Solar products like Solar home lighting systems, solar roof-top systems, solar power packages for home & Schools, solar power plants for colleges, hospitals, small scale industries and commercials buildings & shops. Our solar power plants for Schools, colleges, SME'S, Office, home rooftop systems are affordable and cost-effective where we give solar packages at best price in industry. We have our head office in Chennai and branch office in Madurai. We installed solar home lighting systems in Chennai, Thanjavur, Madurai, Coimbatore and other cities in Tamil Nadu.

We are offering Electrical Panel Board. LV switch boards, MCC panels, MV Panels APFCR panels

dg synchronizing panel, AMF Panels

LT Panel Board, Air Insulated Bus Duct, ht panel board

solar power panels, agriculture machinery, battery pant

ceiling roses, Autoclaved Calcium Silicate Board, Gypsum Ceiling Cornice

Pneumatic Circuit Control Panel, CT Meter Panels, Instrument Cluster Panel

Access Control System, Wireless Cctv System, fire burglar alarm, fibers

Fire Alarm Repeater Panel, Heat Detector, Fire Hose Reel, Fire Sprinkler