AC Drive Control System Dealers in Nungambakkam, Chennai

• length: 180cm

Bed Head Units shall be constructed from aluminium extrusion with round and smooth shape corners and shall be 180cm in length per each patient. The unit shall have three physically separated compartments (for low and extra low voltage electrical services and for medical gas services). The unit shall provide a safe, efficient means of delivering services to patients/staff in both general and special care applications. The unit shall have smooth curved surfaces, no visible screws. Installation of the unit shall be carried out easily by aluminium rail-brackets which allow simple horizontal and vertical alignment taking into account any wall high spots or unevenness. Removal of the covers for maintenance and pipeline connection shall be easily. The unit shall consist of a number of modular extrusion capable of being joined together to form a carcass to suit the particular application. The unit shall have a backspin which shall incorporate an area which is 95x22mm for medical gas pipes. Segregation of services ie. Extra low voltage (< 48 volts), low voltage (< 500 volts) and medical gases shall be maintained throughout. Medical Gas and Electrical services shall be separated by a separator inside unit. Electric power feedings shall be 220V/50Hz. The middle compartment of the unit shall be used for medical gas outlets and electrical services but gas services and electric services shall be physically separated. Upper and lower compartments of the unit shall be used for reading and indirect lights and necessary electrical wirings. The lower cover of the unit shall have a 60cm opening for 1x18W reading light illumination. The upper cover of the unit shall have two 60 cm openings for indirect light illumination. There shall be transparent glass which moulded from SAN material. Reflector sheet shall be used under reading and indirect light to enhance the illumination. Both sides of the unit shall be closed by aluminium covers. All cables and terminal block used inside unit shall be non- flammable type. Electronic start ballast shall be used for reading and indirect lights. The unit shall be manufactured in accordance with forth-coming international and European standards, ISO 11197 and EN 793 for “Medical Supply Units” to HTM 2015 and 2022 and to latest edition of IEE and NEC regulations. The aluminium extrusion unit shall have an electrostatic powder paint finish on all external surfaces. Unit shall be supplied pre-piped, pre-wired and fully tested. The minimum mounting height of the unit shall be 1.7 meters from the finished floor level. All removable covers of the unit shall be earthed. Electric power feedings shall be 220V/50Hz. The unit shall consist of following services for each patient, 1. 1 no of Oxygen outlet, ISO 9170:1990 and BS 5682:1992 compatible 2. 1 no of Medical Vacuum outlet, ISO 9170:1990 and BS 5682:1992 compatible 3. 2 no of double unswitched BS 13A standard electrical socket 4. 4 no of potential earthing node 5. 1 no of RJ11 telephone and RJ45 data socket 6. 1 no of 36 Watt fluorescent tube with electronic start ballast 7. 1 no of 18 Watt fluorescent tube with electronic start ballast 8. 1 no of Nurse call provision 9. 1 no of Two gang switch for reading and indirect light The standard range of Patient Bed Head Unit shall be “CE” marked under the Medical Devices Directive 93/42/EEC with approval body number. Under this directive, the specified products shall be classified as Class IIa Medical Devices.

• Interfaces: Weigand
• Language: English
• User Capacity: 10,000
• Operating System: Linux
• Memory Capacity: 4 GB
• Identification Time: <300 ms
• Size/Dimension: 134.0mmx33.0mmx305.0mm
• Door Access: Face, Password, QR code, Card
• Network Interface: LANx1, Wiegand Inputx1, Wiegand Outputx1, RS485x1, Alarm Inputx2, Alarm Outputx1, USB2.0x1, Lockx1
• I Deal In: New Only
•  :  

• Type: Mdf Panel
• Material: Mdf, 8*4
• Thickness: 10-15mm, 15-20mm, 20-25mm, 5-10mm
• Application: Buildings, Home, Kitchens
• Color: As per our catalogue
• Feature: Easy To Install, Flawless Finish, High Quality
• Position: Interior
• Finishing: Laminated

Green Panelmax Plain MDF is a high-strength panel made from wood or lignocellulosic material which is refined into fibres and then reconstituted with a resin binder at elevated temperatures to form panels which can be used for construction of interiors and furniture, among various other applications. Being manufactured from 100% agro-forestry timber, it is also eco-friendly and an ideal substitute for solid timber and other non eco-friendly panels.   Green Panelmax Plain MDF is available in :Grades:Grade I (Exterior grade) boards are made with special melamine formaldehyde formulated resins which make them ideal for use in water and moisture prone areas.Grade II (Interior grade) boards can be used in the construction of all types of interiors and furniture.Thicknesses: 2.3mm, 2.5mm, 3mm, 4mm, 5.5mm, 8mm, 11mm, 12mm, 15mm, 17mm, 18mm, 25mm, 30mm and 35mm.Sizes: 8’X6’; 8’X4’; 7’X6’; 7’X4’ 6’X 4’ and 6’X 3’.We also concentrate on all types of turnkey projects (material supply and fabrication) for commercial and re sidential and can supply the material on knock down mode with post forming / PVC Foil membrane shuttering as per customer specification.

The world's most accurate hot-wire anemometer with a 2% accuracy - a research-grade multi-function instrument with detachable compatible probes. Probe Compatibility feature allows you to have spare probes. Detachable probe. Automatic Flow Rate Calculation function. Large data storage, stores up to 20,000 measurements. Differential Pressure available as an option.

• Power: 0.5 HP - 25 HP
• Display Type: Digital
• Panel Type: PLC
• Phase: Three Phase
• Country of Origin: Made in India
• Brand Name: SRE
• Frequency: 50 -60Hz
• Mounting Type: Floor Stand
• IP Rating: IP55

• Voltage: 110V, 220V, 280V
• Application: Elevator
• Shape: Rectangular
• Material: Mild Steel, Metal
• Driven Type: Electric
• Condition: New,Old

• Material: Aluminum
• Power Source: Electric
• Voltage: 420V
• Power: 3kW
• Frequency: 50Hz
• IP Rating: IP66
• Phase Type: Three Phase
• Current: 4A
• Capacity: 5KVA
• Temprature: 40Degree C
• Automatic Grade: Automatic
• Relative Humidity: 89%

• Material: MS
• Color: Siemens Gray
• Country of Origin: Made in India
• Application: Automation
• Voltage: 440V
• Brand Name: Fabrication
• Ambient Temperature: 0 - 55 Dec C
• IP Rating: IP 42 / IP 54
• Coating: Powder Coating
• Door Type: Single/Double

MDF is a panel product manufactured from lignocelluloses fibers combined with resin. The specific gravity varies from 0.5 to 0.88. MDF has a homogeneous structure with no identifiable grain or no variations in surface hardness. It can easily be edge-machined to into many different profiles ready for subsequent direct finishing due to its relatively uniform thickness density profile. MDF has a good capacity to hold screws and nails on surfaces and edges. 1. VIR MDF Board will be available in 4 ft. by 8 ft. size with interior, exterior and HMR (High Moisture Resistance) grade. 2. Available Thickness : 6mm, 7.5mm, 7.8mm, 8mm, 9mm, 11mm, 12mm, 16mm, 16.7mm, 18mm, 25mm.

A central gas supply with manifolds outside workspaces save time and money and simultaneously improves product safety and quality. Design is single- or twin-stage for constant outlet pressure despite of falling cylinder pressure. Laboratory Gas Utility points - Laboratory applications for e.g. GC, HPLC, GCMS, AAS, ICP Pressure Control

Fire Alarms, Fire Extinguishers, Fire Hydrants, Fire Safety Equipment

Application Area: Suitable for outdoor installation and harsh environment, Combinable and extendable in all directions, CPRI Type Tested, ASTA Certified, Degree of Protection: IP 65, Material : High - quality PC(Polycarbonate),Burning behavior: Glow wire test IEC 60 695-2-11:960 degree C. UL Subject 94: V-2, flame retardant, self - extinguishing. Tme modular system allows a flexible adaption to the local available space.The polycarbonate UV - and corrosion - proof material and the degree of protection IP 65 allow an indoor and outdoor installation,Toxic behavior: halogen free, silicon free

• Material: WPC
• Thickness: 12 mm
• Color: White
• Features: Termite resistance ,Moisture resistance, Sturdy construction
• Usage/Application: Furniture, Interior Decoration
• Size: 8' x 4'
• Surface Finish: Glossy

Avail from us Fire Alarm Control Panel that is one of the efficient controlling components of Fire Alarm Systems and detects fire related changes so as to indicate threat beforehand. We provide Fire Alarm Control Panels in models such as MORLEY IAS, and others. These Fire Alarm Control Panels are designed by the prominent companies and are provided at market-leading prices.

• DOOR HINGES: imported hinges
• DOOR TYPES: hinged, sliding ,swing
• DOOR DENSITY: 38-40 kg/m3
• DOOR THICKNESS: 60 mm -150 mm

UNICOOL panels are manufactured with international quality. We use Cam lock system with tong and groove joints which make possible, shifting of cold rooms in future. These panels are CFC free and modular panels.   We provide panels in different sizes like 60, 80,100,120,150,200 mm thick. The skin material of panels is PPGI or SS based on customer requirements. The PUF density is 38 -40 kg/m3. The floor panel insulations is initially covered with marine plywood which is covered with anti slip checkered aluminum sheet. The cam lock assembly provides easy to fix and perfect alignment joints in all panels   UNICOOL PUFF DOOR is of high quality and is made with SS or PPGI based on customer requirement.General Door Specifications: 

Biometrics technology is now widely accepted worldwide as the only means available for verification / authentication of an individual’s, fingerprints.  Smart card/ Proximity Card  Biometric Readers  Pin Number   Iris on Move

Access Control System, Biometric System, Card Printer, fingerprint system

HVAC BMS Control Systems, Ceiling Suspended Air Conditioner

Switch Board, Electrical Goods, Lighting Products, electrical lights, Lamps

Access Control System, CORPORATE INTERIOR DESIGNING Service, Plumbing Pipes

Process Control System, Manufacturing Execution System

touch screen control panel, control equipment, Distribution Panels

mv panels, Indoor Substation, Interior Electrical Works

Access Control System, Biometric Identification, Cameras, car reverse sensor

Solar Panel, Solar Water Heater

Access Control System, access control fire alarm interface relay module

panel board, Switch Board, Switch Box

electrical control panel insulator, Control Panel Locks, Limit Switches

panel board, Pre Laminated Board