Industrial Air Conditioning System Dealers in Guindy, Chennai

We offer a wide range of sewage water diffuser. These are utilized in sewage treatmentetp. Float diffusers are made use in more stp and etp.the system consists of 2 number of imported taiwan make plastic floats, ss frame and aerotube gridgrids. We can use grids with any number of aerotubes according to our requirement. Each meter aerotube will give 5 m3 air. The system can be put on the top of effluent. Braided oze can be used from the blower to the grid. There is no need to spend for separate plumbing, construction of structures, design charges etc. The float system size is 1 meter x 1.5 meter. It is compact and will fit into even a small tank. Multiples of floats can be used in larger tanks. The blower can be kept at the bank of the tank or even on the frame it can be mounted. The bod and cod levels are maintained as required. The cost to get 100 m3 or 130 m3 of air is very much low and economical.the cost will come only half of the cost of common diffusers. The workers need not touch the effluent on repair or replacement of the system. The tank need not be emptied while working. More over the float can be bought to any corner of the tank with nylon ropes.(image a float in a leather affluent). Float diffuser specially designed for etpstp. features: can increase air flow in the same system just by increasing no of aerotubes low cost mechanism superior mixing capabilities reduced energy consumption can result in up to 50% electrical savings. no need for separate plumbing or civil work no hidden cost of designing charges high oxygen transfer specifications: type of aero tube microporous tube size od 25.4 mm; id 12.6 mm; moc of aero tube car tyre rubber and pe moc of aero tube clamps ss304 moc of nipple pvc operating temperature of aero tube 70 effective area of aerotube 0.078 m2 area of influence zone 1 m2 optimum through put 5 cubic meters per hour per meter tubing minimum through put 0.5 cubic meters per hour per meter tubing maximum through put 8.5 cubic meters per hour per meter tubing maximum allowable pressure 5 kgcm2 make colorite plastic usa standard oxygen transfer rate 4.2 kg o2.

SIZE : 1/2” to 12” Type : 2 way, 3 way Body/ Bonnet : ASTM A216 Gr. WCB/ ASTM A351 Gr. CF8/ CF8M Internals : SS 304/ SS 316 [Hard facing other material on Request] Gland Packing : Teflon/ Grafoil Trim Design : Contoured Parabolic/ Cage Guided/ Pressure Balanced Characteristic : Linear/ Equal Percentage/ On-off (quick opening) End connections : Flanged end ASME B16.5 CL 150/300/600 Pressure Rating : ASME B16.5 CL 150/300/600 Temperature : upto 450°C Leakage : ASME B16.104 Class V & VI for Soft seating/ Class IV for Metal to Metal. ACTUATOR DETAILS Actuator : Diaphragm & Multi Spring type, Air to open / Air to close as a standard Pneumatic Pressure : 1.44 to 2.44 Kg/cm2 Positioner Details Type : Smart / Electro Pneumatic/ Pneumatic Input Signal : HART/ 4 – 20 mA/ 3 – 15 Psi

Tower Fans that we offer are widely in demand owing to thier excellent functionallity, low maintenance and high intencity of air flow. We make use of user-friendly interface that enables us to network and control the sorting, loading and unloading of all the finished products from a single location. By this, we make sure that the voluminous consignments are kept safely till the final send off. Assistance from skilled professionals and brilliant packaging unit has enabled us to meet specific requirements of the clients. Besides this, we make sure that the material used for wrapping them is of high quality.

Evaporative condensers provide heat rejection for many types of systems, and the specific application will largely determine which INDUS MAKES Evaporative Condenser is best suited for a project. The information contained within this section is geared towards the use of evaporative condensers in the HVAC and light industrial markets only. Evaporative condensers are used in these markets to provide lower condensing temperatures and compressor horsepower savings of up to 15 percent when compared with traditional systems. For technical support with a refrigeration application, contact your local INDUS MAKES Refrigeration. Principle of OperationThe vapor to be condensed is circulated through a condensing coil, which is continually wetted on the outside by a recirculating water system. Air is pulled over the coil, causing a small portion of the recirculating water to evaporate. The evaporation removes heat from the vapor in the coil, causing it to condense. Configuration INDUS MAKES manufactures two types of evaporative condensers: Combined Flow and Counter Flow. Combined Flow:Combined Flow is the use of both a condensing coil and fill surface for heat transfer in an evaporative condenser. The addition of fill surface to the traditional evaporative condenser design reduces evaporation in the coil section, reducing the potential for scaling and fouling. INDUS MAKES’s combined flow evaporative condensers utilize the parallel flow of air and spray water over the coil, and crossflow air/water flow through the fill surface.In parallel flow, air and water flow over the coil in the same direction. In the fill section of INDUS MAKES’s combined flow evaporative condensers, air and water interact in a crossflow configuration: water flows vertically down the fill as air flows horizontally across it.

This air conditioner is ultra thin and sleek in design. It's easy to install. It is also easy to dismount. And because it can be mounted in the centre, at the top, the cassette air conditioner can throw air in multi direction, thereby giving uniform cooling to rooms of any shape or size. Then easy maintenance, multi air flow system, harmonized punch hole grill design, low noise, drain water lift up to 800 mm, four way air deflection. It's ideal for show rooms, restaurants, malls, hospitals, offices and Galleries. Its ranges are 1.0, 1.5, 2.0, 2.5, 2.75, 3.0, 3.5, 3.75,and 4.0TR.

The basic function of exhaust ducting is to work as an air tight tunnel between exhaust hoods and exhaust  fan dis- charge. It has  to  be properly designed to maintain required air quantity, static pressure and air velocity from the individual exhaust hoods and total system requirement. (Ducting to be designed differently for Exhaust and Make-Up Air system to keep negative pressure in the kitchen.   Chennai Exhaust Air System specialise in their fields and execute their works with their confidence. We make Kitchen Exhaust Systems ,M.S Exhaust Blower, Exhaust Fans, Exhaust Hood , Fresh Air System, Air Handling Unit, Grills, Micron Filters, Hefa Filters, Air Washer System, M.S Blowers, (S.S, Aluminium GI), G.I Ducting,Openable & Closed Oil Filters and many more.

• Features: Less power consumption, Uniform distribution of heat, Precision engineered.

• Type: Sensors
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Weight: 0-100Gm 100-200Gm
• Features: Durable, High Work Capacity, Fast Response Time, Easy To Install,Long Sensing Distance

• Condition: New
• Warranty: 6 Months
• Application: Industrial
• Features: Sturdy, High demand, Widely known
• Maintenance: Low
• Finish: Polished
• Resistivity: Corrosion & Chemical resistant
• Durability: Long Life

• Brand Name: MIDLINK
• Application: Homes, villas, restaurants, hotels, offices
• Voltage: 440 V
• Air Speed: Greater than 18 m/s
• Phase: 3 Phase
• Dimension: 930x185x209 mm
• Features: Heat resistance, Easy to clean, Eye-catchy look

Warehouse and cold storage management a warehouse management system (wms) is a software application that supports the day-to-day operations in a warehouse. Wms programs enable centralized management of tasks such as tracking inventory levels and stock locations. The warehouse and cold storage management software helps to maintain your warehouses, storages etc. This software includes various functionalities like details about various locations, rooms, racks, customers. All the data entry forms are user friendly and secured with login facility. The goal of a warehouse management system provides management with the information it needs to efficiently control the movement of materials within a warehouse. Our solution fits for small-medium warehousing companies. Wms has features of managing multiple warehouse companies’ details and its locations, floors, rooms, racks, product’s categories, customers, orders and reports. Warehouse and cold storage management software has following key features: multiple warehouses master entries locations floors, rooms, racks manage categories products customers orders inward outwards bills reports utilities

• Material: Stainless Steel
• Brand Name: iBall
• Shape: Rectangle
• Features: Designed to closed automatically to seal of Draft of a in case of fire, Fire damper can be operated by a Fusible link

• Features: Long life, High grade material, Smooth functioning .

Cool Mist Humidifier work by making water vapor through a rapidly turning disk within the water of the humidifier. Because the vapor from the machine is not heated, there is no risk of raising temperature inside the cold room or place. But the water molecule size higher compare with other models but lower power consumption cost effective to buy the product.

• Features: Quality Testedm High performance, Low maintenance
• Appearance: Modern
• Size: 43*20 mm, 70*20 mm, 90*25 mm
•  :  

• Speed: <2000 RPM
• Phase: Three Phase
• Type of Motor: AC
• IP Rating: IP55
• Rated Torque: 15 lbs-in [Nm]
• Mains voltage: 400 to 460 V

Low Static Ductable 1.5TR 2TR High Static Ductable 3TR 5.5TR 8.5TR 11TR Packaged Unit 10TR 12.5TR 15TR 20TR 25TR 30TR Inverter High Static Ductable 3TR 5.5TR 8.5TR 11TR

• Power: 5.3 kW
• Frequency: 50 Hz
• Voltage: 230 V
• Application: Conditioner provides multi airs wing control
• Tonnage: 1.5 Tonnage
• Brand: Daikin
• Star Rating: 4 Star
• Model Name/Number: FCVF36ARV16
• Mounting Type: Ceiling Mounted
• Type Of Product: Cassette Ac