AIR Vents Dealers in A Nagar, Chennai (23 products available)

• Material: Any
• Condition: New
• Features: Sturdy design, Easy to install, Require less maintenance

The Air ducts Snorkels are manufactured as per customer specifications using Blow Roto molding process. These are designed to produce a cold air induction effect that increases power and torque thereby improving Fuel efficiency & economy.

We are offering disc diffuser. Ring diffuser made up of aero tubes can be used in all the areas where disk diffusers are used. The diffuser can be joined to the header with 3/4 inch ss nipples. Thickness of disk diffuser membrane is only 1 mm while it is 6 mm in ring diffusers. Operating pressure up to 5 kg in aerotubes while it is .7 kg in membranes. Sotr 4.8 kg/hour in aerotube it is 2.7 kg in disk diffusers/tube diffusers. Circle or ring diffusers are fine bubble diffusers. This diffusers are fitted with one 90 cm aerotube. 45cm on the right and another 45 cm on the left side of the pvc pipe which is of 40 cm length. Both sides of the pvc pipe is closed with end caps. In the middle we have saddle or threaded pvc t. This saddle or threaded pvc t can be fitted with 3/4 inch ss nipple which is a standard one for all disk diffusers or tubular diffusers. From blower the pipe headers are fitted with saddles. Hence the ss nipple works as a connecting air link between headers and diffusers. The fine bubble aeration from the diffuser helps to control bod and cod. Each meter length of aerotube will give 5 m3 air/hour. technical datasheet: type of aero tube microporous tube size od 25.4 mm; id 12.6 mm; moc of aero tube car tyre rubber and pe moc of aero tube clamps ss304 moc of nipple pvc operating temperature of aero tube 70 effective area of aerotube 0.078 m2 area of influence zone 1 m2 optimum through put 5 cubic meters per hour per meter tubing minimum through put 0.5 cubic meters per hour per meter tubing maximum through put 8.5 cubic meters per hour per meter tubing maximum allowable pressure 5 kg/cm2 make colorite plastic usa standard oxygen transfer rate 4.2 kg o2/kw

The main and basuc  function of Volume Control Damper is to control the exhaust air quantity from individual Exhaust Hood as per requirement and balance the entire exhaust system to give maximum efficiency at individual requirement,   Chennai Exhaust Air System specialise in their fields and execute their works with their confidence. We make Kitchen Exhaust Systems ,M.S Exhaust Blower, Exhaust Fans, Exhaust Hood , Fresh Air System, Air Handling Unit, Grills, Micron Filters, Hefa Filters, Air Washer System, M.S Blowers, (S.S, Aluminium GI), G.I Ducting,Openable & Closed Oil Filters and many more.  

Industrial Dampers are critical equipment in various places of the ducting system from the boiler to the chimney. They can be used for isolation or flow control. Different designs can be used to give 100% seal tightness for man-safe operations. Dampers are designed on the basis of: Design and Operating values of the medium temperature, pressure and flow rate Composition and nature of the medium flowing in the ductwork Dust content in the medium Special requirements with regard to installation Space availability etc. Each Damper is custom built to suit the application in question with regard to: The temperature ranging from -65°C to +1200°C Choice of material and composition Steel part and steel quality

• Shape: Rectangular
• Usage/Application: Industrial
• Material: Stainless Steel
• Temperature: 482 Degree Celsius
• Finishing: Mirror Finished
• Thickness: 25 to 30 mm

Industrial Fans India offers a complete range of heavy-duty butterfly and louver dampers to meet your requirements. We have installed butterfly dampers as small as 100 mm diameter to as large as 3100mm diameter and louver damper of maximum size 3750mm height x 16000 mm wide. Our dampers are working in some of the harshest environments where abrasion, corrosion and heavy dust loading are prevalent. Butterfly dampers are not as precise as louver dampers for flow control but can be used for modulation when precise control is not critical. For more accurate flow control applications, multi-blade louver dampers, radial vane damper can be used. Simple louver dampers, double louver dampers and tandem louver dampers are used for shutting off and regulating flue gas flows. These are designed in circular or rectangular form according to the requirement.

• Brand Name: Seven Star
• Material of construction: GI / Aluminium / SS
• Thickness: 0.5 to 1.25 mm
• Duct sizes: as per SMACNA standards
• Fittings: all fittings manufactured using plasma & other specialized machinery
• Accessories: all accessories can be ordered along with Ducts

Seven Star introduces Rectangular ducts, pre-fabricated in their factory premises, which is growing in popularity due to the benefits they offer -  accurate quality, neat finish and quicker installation.  Seven Star provides a single stop solution for duct systems and in addition to straight rectangular ducts can also supply all required accessories including duct fittings, gaskets, nuts & bolts, cleats, sealant, flanges, gaskets etc. Ducts are generally fabricated to SMACNA standards, but other standards can also be complied with. Further alternative materials of construction to the normally used GI, are also available.

Dyrocon Butterfly dampers provide a simple & cost effective method of control and isolation. Stainless steel dampers for high temperature applications are available in a variety of sizes. Various sealing arrangementscan be used to provide the correct efficiency for your application.Sealing efficiency can be increased to 100% with the addition of twin seals and a sealing air fan. Butterfly dampers can be actuated pneumatically, electrically or manually by a simple hand lever or reduction gearbox. Key Features:• Louver damper• Butterfly damper• Emergency shut off dampers• Double louver dampers with sealing air feature• Guillotine damper with double cable drive• Guillotine Isolator with rack and pinion drive• Guillotine Isolator with sealing air feature• Diverter dampers• Flap isolators• Stack dampers• Toggle disc shut off valve• DTPA valves• Dampers are supplied with Electrical, pneumatic and hydraulic actuators as per customer needs.• Expansion joints• Rotary air locks• Double flap valves• Screw operated slide gate• PIN gate

• Features: Quality Testedm High performance, Low maintenance
• Appearance: Modern
• Size: 43*20 mm, 70*20 mm, 90*25 mm
•  :  

• Condition: New
• Material: Aluminium Alloy
• Application: Door & Window
• Type: Shutters,Fixing and adjustable installation
• Louver Type: Stationary Louver, Industrial Louver
• Blade Thickness: 0.50mm, 0.47 mm
• Is It Adjustable: Non Adjustable

One of the leading best Fine Bubble Diffuser supplying company.

damper actuators, sensor, Thermostat, controllers, Flow Meter

Membrane Disc Diffusers, Mechanical Evaporators, Media Filtration System

aluminium duct, AHU Erection Service, Duct Erection Services

portable chillers, glass safety film, cold plates, Air Conditioning Parts

aluminium duct, Ac Duct, MS Duct, TDF Duct, SS Duct

Industrial Dampers, Gravimetric Feeders, volumetric feeders

Industrial Dampers, Centrifugal Fans, Axial Flow Fans

Damper Actuator, Thermostart Glow Plugs, Siemens actuator, Inline BTU Meter

Aluminium Aerofoil Damper, Rectangular Duct, Range Hood

Industrial Dampers, Non-Metallic Expansion Joints

Industrial Dampers, boilers spare parts, Gates, Suction Chamber