Alchimica India Pvt. Ltd. Thirunagar, Chennai, Tamil Nadu

HYPEGLUE-TX40 is a one component solvent-less, moisture curing polyurethane adhesive. The adhesive combines high elasticity and excellent mechanical properties, therefore allowing planks of wood to expand and contract without damage.

HYPERDESMO®-D-2K is a two-component, solvent-free polyurethane fluid. It produces a strong membrane of moderate elasticity with outstanding adhesion to many types of surfaces. It is based on pure hydrophobic polyurethane resin plus special inorganic fillers, which result in excellent abrasion and chemical resistance properties.

RUBBER BINDER-M20 is a one component polyurethane resin which cures with the humidity in the atmosphere. It is 100% solids, low viscosity and produces a very elastic hydrophobic membrane with excellent adhesion to EPDM or recycled rubber granules. The product does not contain any toxic monomers nor does it have pungent odors.

Prepare the surface as per standard norms. After applying compatible primer, HYPERDESMO PU membrane is applied with roller or brush in one or two coats. Leave 6-24 hours between the coats. Minimum recommended coverage : 1.2-1.5 kgm2. Commonly used colours : White, Grey, Green and Terracotta. To improve abrasive resistance in selected areas the second coat is applied by adding ADYE component.

Liquid-applied systems, of which polyurethane waterproofing membranes are the prime example, offer decisive advantages particularly where seamless systems are desired; either structurally or aesthetically, and for geometrically complicated connections with ventilation outlets or upturns.

AQUASMART THERMO is a one component, water based insulating paint for both interior and exterior use. It is a100% aliphatic, water-based polyurethane with exceptional performance in difficult climatic conditions. AQUASMART THERMO is a unique insulating product specifically designed to reduce unwanted summer time heat gain and unwanted winter time heat loss from buildings to which it has been applied. The product retains its insulating properties due to the fact that the cells are 100% closed always.

AQUASMART HYBRID-2K is a two component, water based, aliphatic polyurethaneAcryl hybrid coating for waterproofing and protection. The product is easily applied on both vertical and horizontal substrates and forms a seamless, elastic and hydrophobic membrane.

HYPERGLUE-1K-R is solvent free, moisture curing one component adhesive polyurethane base. It provides excellent adhesion and strength even at room temperature application.

Joint sealants are used to seal joints and gaps between two or more substrates, and are a critical component for modern building design and construction. The main purpose of sealants is to prevent air, water, and other environmental elements from entering or exiting a structure while permitting limited movement of the substrates.

HYPERDESMO® is a one component polyurethane fluid which cures with the humidity in the atmosphere. It produces a highly elastic membrane with strong adhesion to many types of surfaces. It contains a small percentage of xylol, and may be thinned with SOLVENT-01 if necessary.

MOLDING-PUR-40 is a two component, 11 mixing ratio, low viscosity cold cast polyurethane elastomer. The low viscosity and the fact that the material is 100% pure resin allows superior handling and excellent imprinting even of the finest detail.