Automobile Gears Dealers in Chennai

Based in Chennai, Tamil Nadu, we are one of the renowned Exporters and Suppliers of Metal Transmission Gears. Obtained from trusted vendors, our Transmission and Final Drive Parts are of unmatched quality. Buyers can place bulk as well as small orders. We promise our products are delivered on time safely. Buy from us corrosion resistant Metal Transmission Gears at market-leading prices!

We manufacture, wholesale and export best quality Bevel Gearsin a variety of standard and customer ordered sizes, width and other dimensions. These are made to meet the demands of different industries. The use of state-of-the-art manufacturing technology facilitates us to manufacture gears that meet the international quality standards. Our bevel gears perform appreciably under high speed and high load conditions.

• Ring Diameter: 15-20mm
• Material: Cast Iron
• Usage: Used in OT Cranes
• Tooth Count: 39/11
• Pinion Splines: 31
• Gear Ratio: 3.55 (Long Yoke)

We at SP INSITU are equipped with specially developed portable toolings and grinding attachments and travel at short notice to undertake and execute complex work INSITU, even in the most confined and demanding conditions. Below given are some of our portable INSITU attachments available to execute onsite repairs. Further, according to the nature and complexity of repair to be done on your machinery, portable INSITU attachments can be designed and fabricated at short notice.

• Driven Type: Hydraulic
• Color: Black
• Condition: New
• Application: Industrial Use

Gamesa Yaw Ring G5X

• Pressure Angle: 200 Degree
• Density: 1.10 To 1.25 G/cm3
• Tensile Strength: 55 MPa
• Thermal Deformation Temperature: 130 Degree C
• Breakdown Voltage: 1.15 Kv/mm
•  :  

A gear consisting of a spirally threaded shaft and a wheel with marginal teeth that mesh into it. The toothed wheel of this gear; a worm wheel. Product Code : SAMS DYN - 014

• Type: Bevel Gear
• Material: Alloy Steel, Cast Iron, Mild Steel, Stainless Seel
• Shape: Round
• Application: Automobiles, Industrial Use
• Weight: 10-20kg, 20-30kg
• Condition: New, Used
• Finishing: Non Polished, Polished
• Input Speed: 1400rpm, 2100rpm, 2800rpm, 700rpm

Our industrial helical gears has its teeth inclined to the axis of the shafts in the form of a helix. Our industrial helical gear is known for its sturdiness and low operational cost. It is very effective. It can be availed at very reasonable prices. specifications 25 to 100 diameter20 – 50 teethmodule : 2-3

The units of the RAN series are designed to fit the purposes of transmissions laid out in right angle setting. Easy to fit and almost maintenance-free, RAN units offer multiple shaft arrangements and a choice of several exact gear ratios, beside the 1:1, that come handy when designing synchronized drive systems. Also available in the version for screw jack duty.

The Plastic Machine Gears of superior quality is availed from us. The Plastic Machine Gears are manufactured using superior quality plastics. The Plastic Machine Gears are available in various sizes and dimensions. The Plastic Machine Gears are also available in various colors. Further, the Plastic Machine Gears are properly packed to ensure the products reach the clients in good conditions.

Precision ground teeth—smoother tooth face and gullet surfaces Patented special set and tooth profile.IMPROVED LIFE WITH OPTIONAL M-51 EDGE MATERIAL Increased heat and wear resistance Available as listed below

• Type: Plastic Gears
• Material: Plastic, PVC
• Shape: Round
• Thickness: 0-25mm, 25-50mm, 50-75mm, 75-100mm
• Application: Automobiles, Industrial Use
• Color: Black, Blue, Grey, White
• Surface Finishing: Non Polished, Polished
• Conditon: New, Used

• Features: Resistant to corrosion, Less maintenance , Durable.

• Material: Plastic
• Diameter (mm): 3 mm to 30 mm
• Tolerance (mm): 0.05mm
• Working Temperature: -60 to 350 degree C

• Shape: Round
• Application: Industrial
• Is It Rust Proof: Non Rust Proof

Helical Bevel Gar Reducer For Cooling Tower precicol helical bevel gear reducers have an overall mechanical efficiency of 90%. They are rated in accordance with CTI STD - 111 and have a service factor of over 2.0. we are also supplying spares and rendering service for any mke or model number gear boxes gear

• Features: Low maintenance,Smooth performance,Require less maintenance

We are offering bevel gears- bspil-dyn-04009 bevel gears -motorized drive and rpm bspil-dyn-04009a bevel gear box with housing bearing bspil-dyn-04009b(h) these are made from actual gears. A realistic shaft is provided to handle and operate and to transmit power to the driven gear through single follower. Assembly is mounted on wooden board and encapsulated with transparent perplex sheet for greater visibility and study.this system also comes with motor driven- model- bspil-dyn-04009(a).

• Type: Medium Voltage Switch Gear
• Rated Voltage: 5.1 kV
• Brand: Siemens
• Power Voltage: 240 V
• Power frequency: 5.2 Hz
• Rated continuous current (self-cooled): 5.3 A
• Maximum Design Voltage: 15 kV To 38 kV
• Lightning Impulse (BIL): Up To 200 kV

• Finishing: Powder Coated
• Material: Stainless Steel
• Features: Corrosion resistance, Fine finish,Easy installation
• Package Weight: 1.5 kg
• Pack Type: Box

• Condition: New
• Finishing: Polished
• Material: Mild Steel ,Cast Iron
• Pressure Angle: 20-30 Degree C
• Diameter: Up to 450 mm

• Material: Cast Iron
• Shape: Round
• Finishing: Powder Coated
• Number Of Teeth: 20
• Inner Diameter: 3mm
• Is It Rust Proof: Non Rust Proof
• Bore Size: 8mm
• Usage/Application: Industrial
• Outer Diameter: 7mm

A worm drive is a gear arrangement in which a worm (which is a gear in the form of a screw) meshes with a worm gear (which is similar in appearance to a spur gear). The two elements are also called the worm screw and worm wheel. The terminology is often confused by imprecise use of the term worm gear to refer to the worm, the worm gear, or the worm drive as a unit. Like other gear arrangements, a worm drive can reduce rotational speed or transmit higher torque. The image shows a section of a gear box with a worm gear driven by a worm. A worm is an example of a screw, one of the six simple machines. 1.      A gear consisting of a shaft with a spiral thread that engages with and drives a toothed wheel. 2.      The toothed wheel driven in this way. Worm gears are an old style of gear, and a version of one of the six simple machines. Basically, a worm gear is a screw butted up against what looks like a standard spur gear with slightly angled and curved teeth. It changes the rotational movement by 90 degrees, and the plane of movement also changes due to the position of the worm on the worm wheel (or simply "the wheel"). They are typically comprised of a steel worm and a brass wheel.

Testing of all kind of ship’s derricks & cranes up to 150 tonnes in all mode. Testing of ship’s loose gears, i.e. hooks, shackles, swivels & blocks and Grabs Annual examination of all derricks, cranes & loose gears, Issue certificates & endorsement in cargo gear register Carry out testing of spreaders, lifting beams, head block of telescopic spreader.

• Features: Resistant to rust,Long Functional

We are the leading manufacturers, exporters and supplier of this products.

• Material: Stainless Steel
• Application: Industrial
• Brand: Vanjax
• Power Source: Hydraulic
• Technique: Hot Rolled
• Surface Finish: Powder Coated