Bosch Cutting Machine Dealers in Chennai

• Color: Grey, Black
• Condition: New
• Voltage: 220V
• Type: Cut Off Machine
• Country of Origin: India
• Model: COMO1
• Power: 2200W
• Blade Size: 14 Inch
• Speed: 3800 Rpm

Marble Cutting Machine, offered by us, is assembled from sound parts and components. The advanced Marble Cutting Machine that we offer is highly functional and energy efficient. Marble Cutting Machines can be availed from us in varied specifications to cut marble of different types. We deal in the latest devices and are enlisted among the prominent Marble Cutting Machine Manufacturers and Suppliers in Tamil Nadu (India).

• Voltage: 220-240 V
• Max Cutting Thickness: 20 mm
• Max Cutting Speed: 500-1000 mm/min
• Max Cutting Width: 500-1000 mm
• Max Cutting Length: 500-1000 mm
• Automatic Grade: Automatic
• Brand Name: Sai
• Minimum Order Quantity: 1 Piece
• Frequency: 50/60 Hz
• Cutting Method: Plasma, CNC

• Voltage: 380V
• Dimension: 3565*2085*1200mm
• Cutting area: 1500*3000mm
• Quantity of cutter: 2 nos
• Platform size: 3007*1504mm
• Plasma power supply: Domestic / USA
• Cutting way: HF & HP Cutting way
• Cutting Thickness: 0.5 – 30mm
• Cutting width: 1mm
• Acceleration speed: 20000mm/min
• Acceleration speed: 20000mm/min
• Total Power: 9kw
• Max. cutting speed: 1200mm/min
• Air pressure: 65-75psi/ 4.5-5.2 Bar

• Voltage: 240v
• Model Number: GDC 120
• Brand: Bosch
• No. Load Speed: 12.000 rpm
• Blade Diameter: 110 mm
• Weight Kg: 2.5 kg
• Power in watts: 1,200 W
• Weight: 3 kg
• Frequency: 50/60 Hz

• Power Consumption: 1800W
• Capacity in Wood: 18 mm
• Capacity: 150 mm
• No Load Speed: 7500 rpm
• Item Weight: 3.7 kg

The cross beam adopt light physical design that structure has stiffness well, the weight is light and the motion inertia is less etc.Gantry type structure Y axis adopt bi-motor drives pair and X,Y,Z adopt round slide way,stable working accuracy of drive is high.Widely used on solid ligheing character cut the tank shaped metal decking and bottom plate, cutting precision could reach good performance.Watch with other advertising equipment, form production assembly line on adwords processing technic, resolve completely the trditional manual processing mode. Efficiency improves several tens times.The cutting hole is small,tidy and there is no residue phenomenon, has avoided trimming treatment for the second time.The cutting speed is higher, precision is higher and the cost is lower.The product opf domestic famousbrand manufacturer which has been conferred many awards on China national patent technologies, is matched to the plasma power supply and plasma cutting gun.

We offer a variety of plasma cutting machines that are used for various cutting applications for stainless steel, aluminum and all other ferrous and non-ferrous metals. These machines are based on the latest and effective technology and use high-grade materials in the manufacturing process. This ensures high durability, robust structure, resistivity to adverse conditions and low maintenance cost. Moreover, customers are eased with the availability of the cutting machine.

• Speciality: Precision designed, Easy to use, Perfect finish .
• used: for cutting various items in manufacturing industries.

• No Load Speed: 6000
• Power Consumption: 500 W
• Cutting Disc Size (inch): 10 inch
• Brand: Bosch
• Frequency: 50 Hz

We have carved a niche amongst the most trusted names in this business, engaged in manufacturing a comprehensive range of Core Cutting Machine. This Core Cutting Machine requires less maintenance.

Plasma cutting is a process that is used to cut steel and other metals of different thicknesses (or sometimes other materials) using a plasma torch. In this process, an inert gas (in some units, compressed air) is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut. Plasma is the fourth state of matter along with solids, liquids and gases. Plasma is a jet or beam of ionized gas capable of conducting electricity. This ionized jet or beam produces extreme heat of around 22,000o C. What is High Definition Plasma? High Definition Plasma is the same process as plasma cutting but the plasma beam is delivered through a much smaller nozzle orifice at higher velocity and results in more accurate profile cutting. A shield gas is also used to swirl around the plasma beam to constrict the beam and keep the cutting beam straight resulting in a square edge on the cut parts and better cut surface quality. What must a CNC be equipped with to be able to control a High Definition Plasma Cutting process? Such a CNC should be similar to the ones controlling Laser Cutting processes. A modern CNC should have Response time less than 0.5 msec servo loop because it must be in a position to respond faster than the cutting process it controls. It should also have linear control over the current of the Source for it to be adjustable to the Feed Rate recommended. What is Pulse Piercing? The cutting energy is controlled by being delivered in high-and-low-current pulses, enabling the reduction of the volume of metal melted. This way we avoid risking molten metal spattering over the nozzle and sensors and destroying them. Pulse piercing is an important tell-tale trial for CNC suitability for High Definition Plasma cutting. What is Torch Height Control (Arc Control) and why is it of such importance? Cut quality depends to a high degree on the distance between the torch tip (nozzle) and the surface of the sheet we work on. The Plasma Arc is not cylindrical, it gets narrower in its upper and lower edges; consequently, when we cut too high the cut is performed by its lower edge and vice versa. In both cases the “sides” of the cut are not square. Please see our photo to the right: the torch is too high and the cut is “conical”. It is only when the cut is performed by the middle section of the Arc that we achieve optimal cuts. Here the presence of a digital Arc Control system interconnected to the CNC is absolutely important. It must be able to interact with the CNC for the ideal Torch Height to be maintained regardless the torch velocity changes and eventual holes in the job. How does Plasma compare to Oxy fuel? A Plasma cutting machine is capable of cutting material much faster than oxy fuel, but plasma is only capable of piercing material up to 50mm thick. Plasma is also able to cut a larger range of material and transfers much less heat into material than oxy fuel. Often plasma cutting torches and oxy fuel cutting torches are mounted on the same CNC cutting machine to give the machine a larger range of processing thicknesses, for example 3mm – 150+mm. For most work Plasma is more efficient than Oxy fuel as 90% of steel cut is less than 50mm thick and if you were to compare some suitable Plasma Cutting system to an oxy fuel system it would process 50mm mild steel more than twice as fast. How does Plasma compare to Laser? 2D profile cutting industry makes good use of both cutting disciplines and both excel in different jobs. Lasers are best for thin gauge material whereas plasma cutters are best at cutting thicker sheets. As Laser resonators are getting more and more powerful and High Definition plasma systems cutting gets better and better there is now a large cross over between the two. The best way to see which technology is right for your company is to talk with an expert in both fields about the thickness of material needing to be cut, the amount of work needing to be processed, the finish and accuracy needed and the rough budget for the machine. What Materials can be cut on a Plasma Cutter? Plasma Cutters are able to cut many conductive materials including Mild Steel, Aluminum, Copper and Stainless Steel. The most popular material cut in the industry is mild steel which also gives the best cutting results.  

Plasma Cutting Machine, cnc cutting machine, Duramax torches, cutting tables

Plasma Cutting Machine, Vertcal Machining center, pepper powders

Plasma Cutting Machine

Bosch Cutting Machine, Ratchet Buckle, cam buckle, Pipe sander

Plasma Cutting Machine, rig welding machine

Marble Cutting Machine, Cutting Machine, Waterfall Music Fountain

Plasma Cutting Machine, plasma cutting machine repairing services

Bosch Cutting Machine, Ball Valves, Power Tools, Block Chains

Bosch Cutting Machine, CP Soap Basket, Water Tank, Bathroom Sink

Plasma Cutting Machine, cnc laser cutting machines, tube cutting machines

Plasma Cutting Machine, Cnc Engraving Machine, granite machine

Plasma Cutting Machine, Submerged ARC Welding Machines, Concrete Saw Cutter

cut off saw machine

Core Cutting Machine, wall sawing machine, diamond wire sawing machine

Plasma Cutting Machine, Industrial Tippers Body, Ss Support Brackets

Wood Cutting Machine, wood grooving machine