Car & Bike Brake Liner Dealers in Chennai

• Country of Origin: Made in India
• Application: Cranes, Lifts, Excavator, Winches, Concrete Mixers, Drop Hammers, Mine Widening Appliances, Etc.
• Size: In thickness from 4.8 mm (3/16 Inhc)to 19mm (3/4") and width from 25.4 mm (1 Inch) to 635.0 mm (25)
• Strength: 630 kg/cm2
• Capacity: 900 kg/cm2
• Temperature: 260 Degree Centigrade. Maximum Continuous Temperature: 125 Degree Centigrade.
• Shape: WA-8 is available in Roll form. Segments, Cones and special shapes can easily be cut from it.
• Brand/Make: Compo WA8 (Genuine Material)
• Suitable For: WA-8 is designed solely for use under dry conditions (i.e. it is not suitable for use in oil).

• Country of Origin: Made in India
• Abestos: Non-Asbestos
• Brand/ Manufacturer: Madras Asbestos Stores
• Vehicle Type: Heavy Vehicle
• Number Of Hole: 1
• Shape: Round
• Packaging Type: Box

CHARMINAR bonded Asbestos industrial brakes is a flexible ,solid woven ,asbestos based friction materials ,made from yarn spun around brass-wire,which contributes considerably to its strength.

Piston, Rings & Pins Manufactured By Ms. Shriram Pistons & Rings Ltd. New Delhi in Technical Collaboration with-Koltbenschmidt Germany & Honda Foundary - Japan for Pistons) - Riken Corporation - Japan for Rings.

• Brand Name: Beral
• Material: NON-ASBESTOS
• Thickness: 5740
• Grade: 1616FF
• Vehicle: Truck
• Applied Vehicle Model: MAN F2000/19.403 TRUCK, MERCEDES BENZ 1838/1840 TRUCK
• Part No: 88502200068(Top)/88502200064(Bottom)

Buy beral brake lining parts at very reasonable prices. Offer upto 35%.

• Material: Carbon Steel
• Thickness: 1.5 mm
• Vehicle Type: Heavy Vehicle
• Brand Name: K2
• Packaging Type: Box

• Material: Iron
• Condition: New
• Break Type: Brake Lining

• Features: Various sizes,Good quality,Cost effective

• Material: Carbon Steel
• Thickness: 1.5 mm
• Size: 6,8,10,12,14,16,18,20,25
• Brand Name: CUSTOMER REQUIREMENT
• Vehicle Type: Heavy Vehicle
• Packaging Type: Box
• Minimum Order Quantity: 1 Unit

• Specific Gravity: 1.6 / 1.8
• Co-efficient of Friction: 0.35
• Ultimate Tensile Strength: 246kg /cm2
• Ultimate Compressive Strength: 630kg/cm2
• Rivet Holding Capacity: 900 kg/cm2

Specification : ITEM: ARB 36. Flexible Solid woven, asbestos based friction material made of Asbestos Yarn spun around brass wire. TEMPERATURE: Max Temp: 260°C Max Continuous Temp: 125°C Co-efficient of Friction: 0.35 Specific Gravity: 1.6 / 1.8 Ultimate Tensile Strength: 246kg /cm2 Ultimate Compressive Strength: 630kg/cm2 Rivet Holding Capacity: 900 kg/cm2 APPLICATION : Drum Brake Linings, cranes, lifts, excavators, winches, concrete mixers, drop hammers, haulages, tippers, road rollers, sugar mill centrifuges, certain. Size: Thickness: 5mm to 25mm Width: up to 510mm Length: 15 Mtrs/ROLL (slitting sizes available as per customer req.)

CHARMINAR bonded Asbestos industrial brakes is a flexible ,solid woven ,asbestos based friction materials ,made from yarn spun around brass-wire,which contributes considerably to its strength. CHARMINAR bonded asbestos industrial brake linings have a medium /high co efficient of friction combined with moderate temperature and wear resistance .it is available in roll form and segments,cones and shapes can easily be cut from it.being a flexible material it is possible to for it to radius when fitting it facilitatae this operation ,it may heated uniformly to a moderate temperature to soften the impregnant .it is designed solely for use Under dry conditions, CHARMINAR bonded Asbestos industrial brake linings are supplied with both surfaces unground. is a flexible SIZE RANGE : Supplied in rolls of approximately 15 meters (50 ft). in thickness from 4.8mm(3/16”) to 19.1mm(3/4”) and in widths from 25.4mm(1”) to 463.6mm(18 ¼”)   Good quality close grain or alloy cast iron. IF steel, then forged or cold rolled with a brinell of 200 or over, cast steel is not recommended for use as mating surface.   TECHNICAL DATA: AVERAGE   (Data based on international standard test methods)   Tensile strength 246kg/cm2(3,500 lbs/sq.in) Compressive strength (for 10% compression ) 633kg/cm2(9.000 lbs/sq.in) Rivetholding capacity 900kg/cm2)12,800 lbs/sq.in) Specific gravity 1.75gm/cc 0.06 lbs/cu.in)   CHARMINAR industrial brakes is suitable for a great variety brakes and clutch components in the general industrial field such as industrial band and drum brake linings, plate and cone clutch linings (on e.g,, cranes , lifts,excavators winches m,concrete mixers ,drop hammers, mine winding appliances , under ground haulages, toppers ,oil well draw works, road rollers ,suger mill centrifuges) certain heavy road transports vehicles and tractors. DESIGN VALUE : The coefficient of friction for design should be based upon the graph ,the severity of application ,and maximum anticipated operating temperature being taken in to account. Normal engineering practice should be followed in applying an appropriate safety factor to torque requirements of brake/clutch units.   RECOMMENDED OPERATING TEMPERATURES:   Maximum temperatures- 260 c (500 f) Mximum continous temperature- 125 c(257 f)

We Offer Brake Liners.

non asbestos brake liner, Hot Washed Pet Flakes, tap set, PVC Tape

We are offering brake lining in india.

asbestos brake lining, Fuel Hoses, fuel line hose, fuel tubes

asbestos free brake linings, Clutch Facings, Disc Pads, railway brake blocks

For bus brake lining, Brake Pads, brake products, Brake shoe assembly

Automobile Parts

Taparia Allen Key, sporting shoes

TATA 320 Crane Brake Linings, crane master cylinders, crane wheel cylinder

Clutch Facing, Disc Pads

steel wool fibers, Steel Fiber, stainless steel fiber, Pavements

two wheeler brake liner, Brake Shoe, centrifugal drive clutch shoe

Brake Shoes, clutch buttons, Clutch Facings, Disc Brake Pads

non asbestos packing sheets, Ptfe Products, Cut Gaskets

braking pad

Clutch Facings

Brake Liner, Ptfe Moulded Bushes, galvanized steel hose clamp

brake pad, Brake Shoes, Clutch Assembly

Mercedes Benz Truck Brake Lining