Calibration Equipment Dealers in Chennai

25MM SV PLATE TO PLATE RT FLAWED SPECIMENSDimensions: Plate to Plate Single V Butt Weld 300mm Long and 150mm Wide on Either Side of The Weld and Plate thickness 25mm. Tolerance: +/- 2mm Specimen: Plate Flaws: 3 per specimen, Randomly placed Specimen Documentation: NDT Verification Reports And CAD Drawings and Test Sheets RT Report. Material: Carbon steel

10 Step Block Hastelloy C276 (Inch Version) 10 Step Block Hastelloy C276 (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"   Please login or register to see 

• Display Type: Digital
• Material: Stainless Steel
• Power: 20.9 kW
• Direct Current: 0 to 20.5 A
• Interfaces: RS-232, IEEE 488

We can develop calibration test bench for your sensor or devices with customized report for analysis voltage sensor, current sensor, pressure sensor, temperature sensor, flow sensor, level sensor, acoustic sensor.

• Country of Origin: India
• Type: Benches
• Material: Aliminum, Steel, Wooden
• Shape: Rectangular
• Certification: ISO 9001:2008
• Application: industry for calibration purpose
• Color: Blue, Brown
• Feature: Eco Friednly
• Condition: New
• Appearance: Modern
• Surface Finishing: Polished

The N1.1 Calibration Kit is used for the calibration of PLANAR TR1300/1 and other vector network analyzers in the frequency range up to 1.5 GHz.  Connector type: N Impedance: 50 Ohm Max operating frequency: 1.5 GHz Calibration kit includes: SCO501NM.1 OPEN/SHORT calibration standard (male-male) CL501NM.1 LOAD calibration standard (male) CO501NF.1 OPEN calibration standard (female) CS506NF.1 SHORT calibration standard (female) P501NFNF.1 THRU calibration standard (female-female)

minimum range from 0 - 300, maximum range from 0 - 600mm, we provide nabl certificates for the calibrated instruments & gauges, iso 17025 calibration standard, we also provide mobile calibration if required.  

• Type: Chemical Injection Skid

our products we work with variety of raw materials including carbon steels, stainless steels, aluminium zinc, & copper alloys and produce forgings, castings, bar stock components, sub-assemblies to stringent specifications. we deploy high grade material, technologically advanced machines & techniques in the manufacturing process and produce heavy engineering parts, fully machined sub-assemblies, critical components to close drawing tolerances and surface finishes. Our range is offered in various technical specifications and is known for their reliability, cost effectiveness & compliance to industrial standards.

• Country of Origin: India
• Type: Dry Block Temperature Calibrator
• Certification: ISI Certified
• Condition: New
• Display Type: Digital
• Power: 220V
• Brand Name: sansel
• Type: Manufacturer

dry block temperature calibrator model                   : tcal 1501/-30 make: sansel display                 : 4.3 inch true tft display with touch screen range                   : -30 to 100°c resolution             : 0.01°c accuracy: ± 0.2 °c stability: ± 0.02 °c dimension (l*w*h): 409 l x 178 w x 357 h power supply: 230 v ac weight: 12.5 kg  

Accuracies : ±0.1% F.S. +1 digit (ETC 600); ±0.15% F.S. +1 digit (ETC 600-2) • Cost Effective – Economy Model • Immersion Depth : 110 mm (ETC 600); 190 mm (ETC 600-2) • Calibration at Site, Fast & Reliable • PD Temperature Control • Analog Output • Switch Test facility • Interchangeable Thermowell Inserts, Single Multihole

• Brand Name: ODAK
• Material: CARBON STEEL
• Dimension: 150 mm x 100mmx 25mm
• Length: 150 mm
• Shape: REC
• Thickness: 25 mm

Hi-tech Next Generation “Multi-Flex” Range of Test Benches offer space saving / multi-purpose “Push-Pull” (Electrically operated) Pop-in/Pop-out Device panels & Mounted Under-bench Trolleys. Nagman also can offer only Bench-tops for Mounting on Customer Table / Furniture. Nagman offer – for Remote / Distributed Field / Site Calibration work Compact Mobile Units – combination of Modules & Utilities mounted in a sturdy Trolley case. Nagman can offer these Test Benches / Bench-tops – one or more – mounted in a Van or Container to serve as “Mobile Calibration Lab” for Site / Field Calibration assignments. Calibration Accuracies (of Instrument Modules) are Traceable to International Standards & duly verified (where possible) (before integration) & Certified by Nagman’s NABL (equivalent to UKAS) Accredited – per ISO 17025:2005 – “Centre for Calibration”.

• Brand Name: Adams
• Model: CS18 FF
• System Type: Acoustic Calibration System
• Frequency Range: 125 Hz... 20 kHz

• Material: SS
• Color: Silver
• Country of Origin: Made in India
• Product Type: Calibration Block
• Brand Name: Vibrant
• Model Name/Number: VNSPL/DAC
• Thickness: 12.5 mm
• Diameter: 50.0 mm

• Range: 400 mm
• Material: Mild Steel
• Brand Name: Mitutoyo
• Application: Industrial
• Mass: 8.5 Kg
• Block Pitch Accuracy: +-0,007 mm

• Material: Steel
• Application: Industrial
• Feature: High Accuracy
• Color: Grey
• Brand Name: Radent
• Size: 12.5X43X75mm

The ‘Calibration Standard’ of the Test Bench is “Bell Prover”, which is considered a Primary (Calibration) Standard to Test & Calibrate Domestic Gas Meters (& Gas Meters used in Hotels/Restaurants etc.). The device is ideal for OEMs, Calibration Laboratories & Calibration Service Providers. The Test Bench, with 2 Sizes of Bell Prover (20L & 100L)will effectively cover Very Low (Qmin – typically 0.016 m3/h (0.27 LPM)) to Maximum (Qmax – 6 m3/h (100 LPM)) Flow Rates. Available Accuracies : 0.2% & 0.5% F.S. Upto 4 Gas Meters can be connected (inserted) during a campaign. Facility provided for continuously monitoring Differential Pressures (DP) across each Meter as well as upstream & downstream Line Pressures & Line Temperatures. Line Pressures are regulated typically around 500Pa. All the testing procedures are controlled by the PC and run automatically, the Test Results can be saved, printed. Simple/Basic, Manual/Semi-Automatic Test Bench Models are also available. Test Bench frame is made of Industrial Aluminium with perfect outlook and strong structure.   GASCAL Series A Boon for Calibration of Domestic Gas Meters – OEMs, Hotels, Hospitals & R&D Institutions. Flow Rates : 0.018 to 6 Cu.M/Hour Suitable for Gas Meter Sizes : G1.6, G2.5, G4, G6 Bell Prover : Capacity 20/100/200 Litres Accuracy : ±0.2% & ±0.5% (Traceable to ISO/IEC 17025 Accredited Laboratory). Upstream/Downstream Pressure & Temperature Measurement D.P. Gauges (for measurement of pressure loss) : 0 to 1.0 Inch of Water (0 to 250 Pa) Meter Clamping : Pneumatic Simultaneous Calibration of multiple Meters (Provision to mount 2/4/6/8 Meters) Consult us for higher capacity Bell Provers for Calibration of Industrial / Bulk Meters.

• Range: 2.5mm to 25.0mm in 2.5mm
• Face measures: 20mm x20mmx15mm.

• Brand Name: Adams
• Model Number: CS18 FF
• System Type: Acoustic Calibration System
• Frequency Range: 125 Hz... 20 kHz

Dry Block Micro processor based digital Fast Heating & Cooling Available in 2 ranges & 6 models Controlled through PID Controller Good Stability Power Supply for Transmitters

We are offering Calibration Equipments at very market leading prices.

biomedical calibration equipments, biomedical equipment, ecg accessories

Calibration Equipment, laser measuring instruments, Calibration Test Bench

Calibration Test Bench, Pressure Transmitter, Temperature Calibrator

Watcal Series Calibration Test Benches, Flow & Level Calibration System

Calibration Test Bench

dry block temperature calibrator, Electronic Instrument Calibration Service

temperature calibration equipments, pressure calibration equipments

Calibration Equipment, Spring Closed Brake, Heat Pipe Cooled Powder Brake