Centrifugal Pumps Dealers in Parrys, Chennai

Features Slow Speed / High Speed Pumps High Grade Cast Iron Body Cast Iron Impellers Available in Single phase / Three phase Applications Domestic & agricultural use Water circulation & boiler feed Fire Fighting

• Specialities: Resistant to corrosion, Durable, highly durable

Applications Rural and Urban Drinking Water Installations. Water Supplies for High Raise Buildings. Lawn & Garden Watering. Water Circulating Systems. Agricultural – Lift, Sprinkler and Drip Irrigation. Industrial Service Water Supply Schemes. Special Features Ingenious hydraulic design ensures better efficiencies over a wide range of heads and discharges, varying between 60% and 140% of duty points. This means high energy saving even at a wide variation of water level in the bores. Easy interchangeability of any of our motor with any of our pump is possible because of standardization of the mounting dimensions. Maximum outside Diameter is 136mm only. Easy for installation even in crooked bores of 150mm size(6″). Water filling of motor is very simple. Special care is taken during stator winding, to withstand field conditions. Lowest vibration and wear due to intermittent bearings. This ensures longer life of the pump. Because of special cooling arrangement in the motor, the winding temperature raise is kept to the minimum, even at extreme voltage fluctuations. Unique design of bearings and thrust bearings increases the efficiency. Motor The Motor is squirrel cage induction motor, totally enclosed and water filled. It is designed for 300/440v on 3 phase 50 cycles AC supply with a speed of 2865RPM. Body is made of heavy duty steel pipe, treated with anti-corrosive lining to prevent rust formation. High quality water resistant polymer insulated wires are used for longer life. High tensile steel rotor shaft with good quality laminations, epoxy coated and baked for rust prevention. Thrust bearings are of special design and special lead-tin bronze & Teflon bearing bushes are used for high wear resistance. The winding and bearing bushes are cooled and lubricated by pure water, filled in the motor before installation. The motor is protected from well water, sand and foreign materials. Motors conform to IS 9283-1971. Standard Features Most modern and latest in design. All the units are thoroughly tested for field conditions. Superior design materials & manufacturing processes assure a longer life. Easy installation. High Efficiencies – better than Internationalvalues, leading to energy saving. Silent, Vibration- free running. The components are made of selective materials under strict quality control. Manufactured by ISO 9001/14001 and OHSAS 18001 Company Effective After – sales service. Pump The impellers are of bronze or glass filled poly – carbonate/GFN2 material for high wear resistance. Impellers are dynamically balanced individually and also after assembly on shaft. Special lead-tin bronze metal and high nitrile rubber bearing bushes are used for high wear resistance and longer life. A strainer is provided at inlet to prevent foreign materials getting into the pump. A non-return valve is provided to prevent back-flow of water. Submersible pumpsets conform to IS    Standard Features Most modern and latest in design. All the units are thoroughly tested for field conditions. Superior design materials & manufacturing processes assure a longer life. Easy installation. High Efficiencies – better than Internationalvalues, leading to energy saving. Silent, Vibration- free running. The components are made of selective materials under strict quality control. Manufactured by ISO 9001/14001 and OHSAS 18001 Company Effective After – sales service. Pump The impellers are of bronze or glass filled poly – carbonate/GFN2 material for high wear resistance. Impellers are dynamically balanced individually and also after assembly on shaft. Special lead-tin bronze metal and high nitrile rubber bearing bushes are used for high wear resistance and longer life. A strainer is provided at inlet to prevent foreign materials getting into the pump. A non-return valve is provided to prevent back-flow of water. Submersible pumpsets conform to IS 8034-1989.

Features Slow Speed Self Priming Pumps High Grade Oast Iron / Aluminium Housing Gun Metal Impellers Single Phase / Three phases Application Domestic Water Use Deeper Suction Water Circulation Instruction Centrifugal monobloc pumps (single phase / two & three phase*) approximate performance at 2880 rpm, 240 volts, single phase, 50 hz operation

Features Non corrosive material of construction Ideal solution for commercial system Designed for continuous duty condition Low noise level Vertical space and piping saving design Ideal solution for flow rate between 1 m3/h to 20 m3/h & maximum operating pressure up to 11 Bar TEFC motor comes with IP 55 protection & Class F insulation Applications Booster system Air-conditioning and cooling system Industrial chilling plants Garden sprinkler, rain water collection CNC lathe machine for component cleaning and cooling Water treatment in RO Water transfer

Single Stage end suction centrifugal pumps Centrifugal Mono block pumps Horizontal Multistage centrifugal pumps Single / Double stage split casing centrifugal pumps Self priming Non-Clog centrifugal pumps Vertical centrifugal pumps Circulation Pumps Submersible Pumps

`REEJA’ Centrifugal Power Driven Pump is destinated for handling bothclean and non aggressive water.• Water supply from fountains, lakes, rivers’ water transport through the pipelines over long distances.• Irrigation of the crops through channels• Water dewatering from the industrial channels with pipes, channels.

• Head: Maximum 40M
• Power Range: 0.5HP to 2.0 HP
• Speed: 2800RPM
• Discharge: Maximum 540 LPM
• Voltage Range: 200V- 240V, 50Hz, AC Single phase
• Motor Type: Capacitor start and run motor TEFC type

Features     High grade silicon stamping for better PerfomanceBuilt-in with imported motor protectorDynamically balanced Rotor & ImpllersGunmetal / Cast Iron Impellers for higher effficiency   Application     Irrigation for Small Farms & GardensHighly Discharge water Filling for Sump to overhead TankFlats, Apartments,Hotels, Hospitals & Commercial Water SupplyPressure Boosting Water Supply  

• Power: 1 HP
• Brand: Besten Jet
• Stages: Two Stage
• Impeller: SS And PP
• Max Suction: 25 Feet
• Max Delivery: 1.0 HP To 0-70 Feet
• Pump Adapter: Cast Iron

We are offering cdlkf series immersion multistage centrifugal pump. These pumps are compact, highly reliable, low maintenance and easy to install. This immersion multistage pump has flow range (q) 0.4-55.0 m3hr and liquid temperature -15°c - +120°c.

Centrifugal Pump, Submersible Pump, Jet Pump, agricultural pump

Centrifugal Pump, Air conditioner, Compressor Spare Parts

Pump, Axle, PVC Pipes Fittings, Shower, Stone Sinks, Taps, towel rail

Pump, hydraulic driven submersible pumps, Diesel Generators

coupled pump, Diesel Vibrator Engine, Concrete Groove Cutter