Clamp Meters Dealers in Chennai

• Warranty: 1 year
• Weight: 500 g
• Features: Max/Min/Average readings and hold function,40 mm jaw opening,Highest resolution of 1 μA, measure up to 60 A
• Model Name/Number: Fluke 368 FC
• Battery: 2 AA
• AC Current - Sensing Range: 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
• Brand: Fluke
• Usage/Application: General Electrical
• Jaw Open: 40 mm
• Packaging Type: Box
• Dimensions: 234 x 101 x 46 mm
• Maximum Conductor Diameter: 40 mm
• Display (LCD): Digital readout: 3300 count

RishClamp-ON CT (frequency 40Hz…1KHz)measures current without interrupting the conducting line used directly with Rish multimeters. Compliance-CAT III 600V per IEC 61010. Accuracy 1 .Used for electrically isolated measure of AC. Models:1000A5A, 1000A1A, & 300A0.3A

Designed as per the set industrial standards of quality, our Digital Clamp Meters are widely demanded in the domestic market. The offered Digital Clamp Meters have various attractive attributes like Exclusive Tight-Sight bottom display (selectable audible), Frequency via clamp head or test leads, selectable auto power off and many more. We are a reliable Digital Clamp Meter Supplier from Tamil Nadu (India). We make them available at highly affordable prices. Also, we can process bulk orders on request.Features : 1000A AC/DC TRMS Clamp Measures AC/DC Current True RMS AC/DC Voltage Selectable audible and visual voltage alerts on AC/DC voltage functions Resistance Capacitance High Frequency Rejection Peak hold Max/Min Data Hold Audible Continuity Backlit Display Selectable auto power off Low battery indicator CAT IV - 600V rating CAT III - 1000V rating

Models : 2250-Hz AUTO, 1000A AC, Auto Ranging, 3¾ Digit 3999 Counts, Data Hold, Frequency, Duty Cycle, APO.

• Power supply: 1×1.5V, IEC LR03 Fuse 0.5A 250V
• Model: TEMPTEC (Big Display, 3 line Display)
• Humidity Range: 15 – 99% R.H.
• Model: TH- 103 (Jumbo Display, 2 line Display) With 1 meter sensor probe
• Temp. Range: Indoor: -50 °C to 70 °C Outdoor: -50 °C to 70 °C
• Humidity Range: 20 – 99% R.H

Features: Fitted with digital meter Resistant to high voltage Accurate results   Specifications: Universally usable analogue clamp meter in a compact housing. 11 ranges in 5 functions AC current measurement up to 1000 A (±4% full scale) AC voltage measurement up to 600 V (±4% full scale) DC voltage measurement up to 300 V (±3% full scale) Resistance measurement up to 200k ohms (±3% full arc) Data Hold function Clamp opening 48 mm Power supply: 1×1.5V, IEC LR03 Fuse 0.5A 250V Model: TEMPTEC (Big Display, 3 line Display) With 3 meter sensor probe clock Humidity Range: 15 – 99% R.H. Temp. Range: Indoor: -50 °C to 70 °C Outdoor: -50 °C to 70 °C Model: TH- 103 (Jumbo Display, 2 line Display) With 1 meter sensor probe Humidity Range: 20 – 99% R.H

• Brand Name: Masteck
• Features: Accurate results, Low rate of error actual readings, Easy to use .

• Warranty: 6 Months
• Model Name/Number: Meco 2250
• Battery: 9V
• AC Current - Sensing Range: 1000A
• DC Voltage: 1000V Auto
• Brand: MECO

• Display Type: Digital
• Voltage Type: DC
• Material: ABS Plastic
• Insulation Test: 6 G Ohm

Clamp-On Ultrasonic flow meters are designed for applications where a customer is unwilling or unable to cut into the process measurement line to install an in-line meter. Available in configurations for pipe line sizes from DN15 to DN4000 (12” to 160”), the Clamp-On Ultrasonic flow meter design offers a cost-effective means of measuring liquid flow through a pipe. With designs that can withstand up to 200˚C (392˚F), this Clamp-On Ultrasonic flow meter technology is ideal for liquids with limited solids or gas content. Because Clamp-On Ultrasonic flow meter mounts on the outside of the pipe, there is no need to worry about material compatibility with the process being measured or the pressure in the pipeline. Clamp-On Ultrasonic flow meter is ideal for users looking for a process measurement device that is easy to install and can maintain flow measurement for clean liquids.​

We make sure; our products are produced using top grade materials sourced from reliable vendors only. With the aid of diligent team of professionals and brilliant packaging system, we are able to meet standard as well as tailored packaging requirements of the patrons.

• Dimension: 185 x 65 x 28 mm
• Features: Rugged design, Perfect finish, Sturdiness
• AC Current (Ampere): 2A, 20A, 200A, 400A
• DC Voltage (Volt): 200mV, 2V, 20V, 200V, 600V
• Resistance (Ohms): 20K

Fluke 773 Milliamp Process Clamp Meter Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time:   Taking mA measurements by removing a wire and breaking the loop   Calling the control room to isolate a loop   Testing analog input/output on a console   Troubleshooting devices with mA inputs and outputs   Repairing intermittent or erratic 4-20 mA loops   Going back to the shop to get extra tools If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system FEATURES   Best in class 0.2 % accuracy   0.01 mA resolution and sensitivity   Measure 4 to 20 mA signals without ”breaking the loop”   Measure mA signals for PLC and control system analog I/O   Dual backlit display with both mA measurement and percent of 4 to 20 mA span   Measurement Spotlight illuminates hard to see wires in dark enclosures   Detachable clamp with extension cable for measurements in tight locations   Measure 10 to 50 mA signals in older control systems using the 99.9 mA range   Automatically change the 4 to 20 mA output for remote testing   Power saving features, auto-off, backlight timeout extend battery life   Hold function captures and displays changing measurements   Measure 4 to 20 mA signals with in-circuit measurement   Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters   Source 4 to 20 mA signals for testing control system I/O or I/Ps   mA output linear ramp or 25% step output   Automatically change the 4 to 20 mA output for remote testing   DC voltage measurement to verify 24V power supplies or voltage I/O signals   Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals   Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp   Enables milliamp signal logging to a separate logging device without breaking the loop   Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop   mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal   Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators   Voltage output linear ramp or 25% step output   Automatically change the voltage output for remote testing

• Application: General Electrical
• Brand Name: Meco
• Warranty: 1 Year

• Type: Clamp Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Body Material: Aluminum, Brass, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Stable Performance
• Warranty: 1Year, 2Years

• Warranty: No
• Features: Auto ranging LCD-Display,Accurate measurements,True reading,Overload protection for all ranges
• Model Name/Number: 36- Auto BL
• Battery: 1.5V X2
• DC Current: 0-40/400/600A
• AC Current: 0-40/400/600A
• DC Voltage: 0-600V
• Brand: MECO
• Usage/Application: General Electrical
• Jaw Open: 24 mm

• Color: Yellow
• Brand: Waco
• Material: Plastic
• Usage/Application: Laboratory
• AC Voltage: 750V
• DC Voltage: 1000 V
• Accuracy: +-(1.0% + 1)

• Feature: Large, easy to read LCD display , Low battery indication , Auto power off ,Auto and manual ranging , True-rms and backlight screen
• Brand Name: Amprobe
• Application: Industrial
• Model: ACD-15 PRO 2000A

• Voltage: 0-2000V
• Display Type: LCD
• Weight: 460 Grams
• Model Name/Number: MECO-4455
• Usage/Application: Solar Industries
• Brand: MECO
• Power Supply: 9 V Battery
• Dimension: 270x100x46mm
• Features: High Voltage measurement

• Color: Grey
• Display Type: Digital
• Weight: 3 KG
• Weight: SI/DPA
• Usage/Application: Industrial
• I Deal In: New Only
• Features: Handy single phase table top device, LED display
• Auxiliary supply: 230V, 50Hz
• Potential circuit: 110 / 440V AC.
• Current circuit: 1A / 5Amps AC
• Range: Overall size
• 300 x 100 x 150 mm: 3 Kg

• Frequency: 50.00 Hz
• Features: Accurate results, Low rate of error actual readings, Easy to use
• Jaw Opening: 43mm Max
• DC Voltage: 4V, 40V, 400V, 1000V

• Model Number: Kew 2500
• Brand: Kyoritsu
• DC Current: 0.01 mA
• Accuracy: 0.2%
• Operating Temperature: -10 to 50 Deg C
• Camp jaw dia: 6 mm
• Relative humidity: less than 85%

• Brand Name: Sonel
• Warranty: 1 Year
• Item Code: CMP400
• Battery: External
• Digit Display: Digital
• AC Current: 600 A
• Model No.: 400

Clamp Meter, Multimeter, high voltage probe, Current Probes

Digital Clamp Meters, digital portable calibrators

tong tester, shielded wires

Digital Clamp Meters, clamp meters, Digital Thermometers

Digital Clamp Meters, Digital Panel Meter, MICRO CONTROLLER BASED KITS

digital clamp on power meter, ac machine, dc machines, special machines

clamp meters, Oscilloscopes, Recorders, Data Acquisition Systems

clamp meters, test instrumentation, measurement instrumentation