Commercial Air Conditioner Dealers in Kotturpuram, Chennai

• Cooling Capacity (TR): 175 kW
• Phase: 3 Phase
• Voltage: 440 V
• Chiller Shape: Rectangular
• Refrigerant: R22
• Water Volume: 30 Gallons
• Water Max Pressure: 150 Psig
• Compressors: 4
• Frequency: 60 Hz

Wad Sprial Duct is fabricated from steel strips helicoidically wound and seamed with a four ply lockseam which gives the pipe added rigidity .The seam is outside the pipe wall leaving the inside free of obstruction for an optimized air flow...

The Air ducts Snorkels are manufactured as per customer specifications using Blow Roto molding process. These are designed to produce a cold air induction effect that increases power and torque thereby improving Fuel efficiency & economy.

Seven Star also manufactures spiral ducting which is entirely machine-made. All fittings are also factory manufactured using specialised equipment, such as plasma cutters and various locking machines. Seven Star ducting systems have been found to pass duct leakage tests conducted as per SMACNA or DW-144 procedures. Value added services such as external painting, insulation, extra ribs for additional rigidity, cutting of collars for grille fixing etc. can be provided.

We offer a wide range of sewage water diffuser. These are utilized in sewage treatmentetp. Float diffusers are made use in more stp and etp.the system consists of 2 number of imported taiwan make plastic floats, ss frame and aerotube gridgrids. We can use grids with any number of aerotubes according to our requirement. Each meter aerotube will give 5 m3 air. The system can be put on the top of effluent. Braided oze can be used from the blower to the grid. There is no need to spend for separate plumbing, construction of structures, design charges etc. The float system size is 1 meter x 1.5 meter. It is compact and will fit into even a small tank. Multiples of floats can be used in larger tanks. The blower can be kept at the bank of the tank or even on the frame it can be mounted. The bod and cod levels are maintained as required. The cost to get 100 m3 or 130 m3 of air is very much low and economical.the cost will come only half of the cost of common diffusers. The workers need not touch the effluent on repair or replacement of the system. The tank need not be emptied while working. More over the float can be bought to any corner of the tank with nylon ropes.(image a float in a leather affluent). Float diffuser specially designed for etpstp. features: can increase air flow in the same system just by increasing no of aerotubes low cost mechanism superior mixing capabilities reduced energy consumption can result in up to 50% electrical savings. no need for separate plumbing or civil work no hidden cost of designing charges high oxygen transfer specifications: type of aero tube microporous tube size od 25.4 mm; id 12.6 mm; moc of aero tube car tyre rubber and pe moc of aero tube clamps ss304 moc of nipple pvc operating temperature of aero tube 70 effective area of aerotube 0.078 m2 area of influence zone 1 m2 optimum through put 5 cubic meters per hour per meter tubing minimum through put 0.5 cubic meters per hour per meter tubing maximum through put 8.5 cubic meters per hour per meter tubing maximum allowable pressure 5 kgcm2 make colorite plastic usa standard oxygen transfer rate 4.2 kg o2.

• Type: Single Skin
• Brand Name: Hybrid
• Country of Origin: Made in India
• Weight: 90
• Voltage: 440 Volt
• Usage/Application: Industrial
• Capacity: 5000 cfm to 45000 com
• Material: Aluminium
• Installation Type: Floor Mounted
• Body Material: Aluminium
• Phase: Three Phase
• Frequency: 50 Hz
• cooling capacity: 13 kw to 776 kw

Tower Fans that we offer are widely in demand owing to thier excellent functionallity, low maintenance and high intencity of air flow. We make use of user-friendly interface that enables us to network and control the sorting, loading and unloading of all the finished products from a single location. By this, we make sure that the voluminous consignments are kept safely till the final send off. Assistance from skilled professionals and brilliant packaging unit has enabled us to meet specific requirements of the clients. Besides this, we make sure that the material used for wrapping them is of high quality.

Our stern examination in the raw materials and other inputs help us presenting quality assortment of products. With complete inspection on all materials, we ensure premium quality of products. Rely on us and place orders with us, timely deliveries will be straight to your doorstep!

SIZE : 1/2” to 12” Type : 2 way, 3 way Body/ Bonnet : ASTM A216 Gr. WCB/ ASTM A351 Gr. CF8/ CF8M Internals : SS 304/ SS 316 [Hard facing other material on Request] Gland Packing : Teflon/ Grafoil Trim Design : Contoured Parabolic/ Cage Guided/ Pressure Balanced Characteristic : Linear/ Equal Percentage/ On-off (quick opening) End connections : Flanged end ASME B16.5 CL 150/300/600 Pressure Rating : ASME B16.5 CL 150/300/600 Temperature : upto 450°C Leakage : ASME B16.104 Class V & VI for Soft seating/ Class IV for Metal to Metal. ACTUATOR DETAILS Actuator : Diaphragm & Multi Spring type, Air to open / Air to close as a standard Pneumatic Pressure : 1.44 to 2.44 Kg/cm2 Positioner Details Type : Smart / Electro Pneumatic/ Pneumatic Input Signal : HART/ 4 – 20 mA/ 3 – 15 Psi

Item Code: Ninfa-Series Our clients can avail from us a wide range of Swimming Pool Chillers of best quality. These are highly demanded in market due to their sturdy construction, rigidity and best quality. Offered product operates low noise and has a long life. Apart from this, we offer these Swimming Pool Chillers in market at very reasonable prices.

Air Curtains are used for cleanliness purposes. The aim of dust prevention is something, which is effectively attained with the usage of Air curtains. Water Proof Commercial Ply in Teak Wood Structure is used which adds to the quality of products. Our array of Air Curtains is high on demand in the market and effectively prevents dust from coming in the electronic equipment. Apart from this, the Air Curtains offered by us are competitively priced. Controls Motor by DOL StarterDoors by Electromagnetic InterlockingOverload Protection by thermal relayShower duration by preset electronic timerEmergency off by mushroom head push button Used in Pharmaceuticals & Food IndustriesLaboratoriesClean RoomsComputer FacilitiesCold StoragesShow Rooms & RestaurantsElectrical & Electronic IndustriesHospitals

Our spot cooler, panel air conditioner, precision air conditioning system, conveying air conditioning system, are manufactured for film negative storage, perishable food hygro cooling, hygroscopic drug manufacturing area, Spot cooling, Paint booth and Paint lines, Candy manufacturing process that needs to maintain precision temperature, relative humidity and fresh air level. Scanair Air Chillers will maintain the temperature range from – 40˚ C To 30˚ ± 1˚ C. capacity from 450 KcalHr to 150000 KcalHr with 100CFM To 20000 CFM with different air flow capacity. These air chillers are ideal all most suited industry like Film Blowing, HDPE, LEPE, Lamination Industry, Candy Manufacturing, Spot cooling area etc.,

screw chillers offer some unparalleled advantages intrinsic to their design itself - both in their water-cooled and air cooled models. chillers are designed to minimize energy costs and offer reliable operation. eco-friendliness, small footprints, low sound and vibration levels, and trouble free operation are some of their other benefits. Many of these benefits result from the use of single screw compressor technology.

damper actuators, sensor, Thermostat, controllers

The Function Of Industrial Ducting   1. To Remove Hazardous Gases, Fumes, Fog, Dust, Heat, & Unwanted Gases 2. To Maintain Fresh & Clean Environment . 3. To Increase Human Efficiency & Remove Human Fatigue. It Is Now Necessary To Make Green Surrounding to maintain our EARTH GREEN.   Chennai Exhaust Air System specialise in their fields and execute their works with their confidence. We make Kitchen Exhaust Systems ,M.S Exhaust Blower, Exhaust Fans, Exhaust Hood , Fresh Air System, Air Handling Unit, Grills, Micron Filters, Hefa Filters, Air Washer System, M.S Blowers, (S.S, Aluminium GI), G.I Ducting,Openable & Closed Oil Filters and many more.

Out door unit Continuous operation is possible even in the unlikely event of compressor failure. There is no immediate system shutdown if trouble occurs in any compressor. The other compressors continue to operate on an emergency basis. Indoor unit continuous operation is possible even if trouble occurs at an indoor unit. Each indoor unit is controlled individually on the system network. This allows all indoor units continuous to run unaffected even if trouble should occur at any indoor unit(s) in one system, Its called VARIABLE REFRIGERANT FLOW SYSTEM. I Its advantages are Single outdoor unit, Many indoors, Easy installation and operation, High efficiency Refrigerant R410A, Improvement of long life by reducing compressor wear, Pleasant air conditioning meeting individual room requirement temperature, More length pipe line, Minimum space and Super quiet system. This type Air conditioner suitable for all type of Commercial and Individual spaces. This ranges are called in Horse Power

Hitech Air curtains are the best elements to control the indoor climate in all the places where the doors can't be always closed. Throw the numerous applications where you can use them.

• Size: 5inch, 6inch, 7inch, 8inch
• Type: Fragrance Diffuser
• Material: Aluminum, Stainless Steel
• Shape: Oval, Rectangular, Round, Square
• Thickness: 1mm, 2mm, 3mm, 4mm, 5mm
• Application: Home, Hotel, Interior Decor
• Color: Black, Brown, Grey
• Feature: Dust Free, Heat Resistance, Light Weight, Nice Fragrance, Shiny Look
• Appearance: Antique, Common, Modern
• Finishing: Non Polished, Polished

We are offering sensors. Inductive proximity capacitive photo electric ultrasonic color mark sensor fork sensor m8 to m30 12v dc to 24 v dc

Industrial Dampers are critical equipment in various places of the ducting system from the boiler to the chimney. They can be used for isolation or flow control. Different designs can be used to give 100% seal tightness for man-safe operations. Dampers are designed on the basis of: Design and Operating values of the medium temperature, pressure and flow rate Composition and nature of the medium flowing in the ductwork Dust content in the medium Special requirements with regard to installation Space availability etc. Each Damper is custom built to suit the application in question with regard to: The temperature ranging from -65°C to +1200°C Choice of material and composition Steel part and steel quality

Dyrocon Butterfly dampers provide a simple & cost effective method of control and isolation. Stainless steel dampers for high temperature applications are available in a variety of sizes. Various sealing arrangementscan be used to provide the correct efficiency for your application.Sealing efficiency can be increased to 100% with the addition of twin seals and a sealing air fan. Butterfly dampers can be actuated pneumatically, electrically or manually by a simple hand lever or reduction gearbox. Key Features:• Louver damper• Butterfly damper• Emergency shut off dampers• Double louver dampers with sealing air feature• Guillotine damper with double cable drive• Guillotine Isolator with rack and pinion drive• Guillotine Isolator with sealing air feature• Diverter dampers• Flap isolators• Stack dampers• Toggle disc shut off valve• DTPA valves• Dampers are supplied with Electrical, pneumatic and hydraulic actuators as per customer needs.• Expansion joints• Rotary air locks• Double flap valves• Screw operated slide gate• PIN gate

• Country of Origin: Made in India
• Brand: Blue Star
• Capacity: 1 Ton
• Inverter Technology: Yes
• Material: MS
• Usage/Application: Office Use
• Color: White

Indus manufactures Chillers of all types namely Bare Pipe, Finned Pipe, Shell & Tube, Direct Expansion, Flooded System and Plate Heat Exchanger. Proper design ensures maintenance of the correct temperature of the product and also long life on account of correct and proper materials are used in the fabrication and the equipment are manufactured as per the ASM Code.  

• Condition: New
• Material: Aluminium Alloy
• Application: Door & Window
• Type: Shutters,Fixing and adjustable installation
• Louver Type: Stationary Louver, Industrial Louver
• Blade Thickness: 0.50mm, 0.47 mm
• Is It Adjustable: Non Adjustable

• Material: Any
• Condition: New
• Features: Sturdy design, Easy to install, Require less maintenance

For Aerobic sewage treatment system and aquatics for supplying air tube breeding and culture pond. Light and compact, oil-less design. Low noise Low-power consumption(230V AC). Low running temperature, easy maintenance. Weather proof case IP 55. Unrivaled aeration, lifetime and performance. Enables continues operation for over 20,000 hours can run 24/7. No Grounding work required.

Industrial Fans India offers a complete range of heavy-duty butterfly and louver dampers to meet your requirements. We have installed butterfly dampers as small as 100 mm diameter to as large as 3100mm diameter and louver damper of maximum size 3750mm height x 16000 mm wide. Our dampers are working in some of the harshest environments where abrasion, corrosion and heavy dust loading are prevalent. Butterfly dampers are not as precise as louver dampers for flow control but can be used for modulation when precise control is not critical. For more accurate flow control applications, multi-blade louver dampers, radial vane damper can be used. Simple louver dampers, double louver dampers and tandem louver dampers are used for shutting off and regulating flue gas flows. These are designed in circular or rectangular form according to the requirement.

Panel Air Conditioners, Oil Chillers, Water Chiller, Cam Shaft Grinder

Ductable Unit, Used ductable ac, second hand cassette ac

duct able air conditioners, Cassette Air Conditioners, CHILLERS