Construction Machine Dealers in Park Town, Chennai

MINI BATCH PRINTING MACHINE HAND OPERATED Along with one letter set (A-Z,0-9 each 10pc) ¼ kg Ink and One piece Hopper Printing Area 70* 50 mm(2.5 inches * 2 inches) Model- GPD 111   MINI BATCH PRINTING MACHINE MOTORIZED Along with one letter set (A-Z,0-9 each 10pc) ¼ kg Ink and One piece Hopper Printing Area 70* 50 mm(2.5 inches * 2 inches) Model- GPD 333

ELEVATING FLOAT-TOP TABLE• Table adjusts to extra-low elevation to help elderly, handicapped, or pediatric patients, move more comfortably onto the table• Convenient fat top design facilitates easier patient transfer from stretchers• Extra-wide design and 650 pound (295.5 kg) weight capacity ensures the ability to accommodate a full range of patients• Up-and-down table movement and activation of the float-top feature are both adjusted with a single handle, to maximize technologist controlFLOAT-TOP TABLE • Convenient fat top design facilitates easier patient transfer from stretchers• Extra-wide design and 650 pound (295.5 kg) weight capacity ensures the ability to accommodate a full range of patients• Activation of the float-top feature is adjusted with a single handle, to maximize technologist control ENCLOSED FIXED TABLE• Convenient fat top design facilitates easier patient transfer from stretchers• Extra-wide design and 650 pound (295.5 kg) weight capacity ensures the ability to accommodate a full range of patients• Enclosed base presents a cleaner look and design than standard tablesTube StandFREESTANDING TUBE STAND • Freestanding design eliminates the cost and installation hours for additional ceiling mounted rails, and accommodates facilities that can’t support a ceiling mounted support system• Wide range of longitudinal and transverse travel, column rotation, tube angulation, and trunnion rotation supports thorough coverage during lateral studies and other diffcult positions• Wide vertical travel range enhances pediatric imaging of weight- bearing kneesSTANDARD TUBE STAND• Design offers 2m, 2.5m or 3m foor and wall tracks, speeding installation, cutting costs, and eliminating the need for a ceiling mounted support system• Both sides of the soft-touch handgrip have fngertip controls, providing fast and easy access to multi-function lock release switches – for speedy adjustment of longitudinal, vertical and tube angulationWall StandsWALL STAND • Wide vertical-travel range with minimal focal spot-to-floor distance enhances pediatric imaging of weight-bearing knees – as well as upright examinations of adults• Ergonomically designed EZ-Glide hand control allows operators to easily adjust, from a comfortable standing position• Narrower base saves additional space in smaller x-ray rooms• Optional overhead and side mount handgrips help stabilize patients during standing and weight bearing examsSIDE MOUNT WALL STAND • Side-mount wall stand with its narrower base saves major space in smaller rooms• Wide vertical-travel range with minimal focal spot-to-door distance enhances pediatric imaging of weight-bearing knees – as well as upright examinations of adults• Ergonomically designed EZ-Glide hand control allows operators to easily adjust, from a comfortable standing position• Optional overhead and side mount handgrips help stabilize patients during standing and weight bearing exams

• Application: Shredder
• Type: Steel Iron Shredder
• Certification: CE Certified, ISO 9001:2008
• Condition: New
• Shredder Type: Steel Scrap Shredder
• Warranty: 1year

4 tons per hour to 140 tons per hour output, output size: 30mm to 60 mm, can shred cast iron products also, Hammer mill shredders' feed chutes are designed with replaceable chute liners and feature state of the art, heavy duty, driven double feed roller assemblies. Hammer mill shredder rotors is specially designed with less maintenance, it does not have to be replaced, just hard faced every couple of years. The rotor powered by Siemens motor giving plenty of power for shredding process. Heavy-duty wear-resisting hammer and gear design extremely lengthen the life time and decrease the operation cost.

• Capacity: 4 X 100 Ml Tubes
• Power: 220 to 240 V, 50 Hz, single phase
• Max. Speed: 5000 - 7000 rpm
• Max. RCF: 3,400 - 4400
• Timer: 0 to 99 min, continuous run, short Cycle mode
• Immunity: as per EN 50082-1
• Radio interference: EN 55011 ISM Class B

Features Compact & Robust Construction Microprocessor controlled, Transparent see through Acrylic Lid Speed and timer setting facility by keypad Digital display of Speed and Time. Safety facility-Overheating protection, Lid locking & emergency lid lock release. Lid opening key for opening lid. Conformity with safety regulations IEC 1010-2-2, DIN norms and EC standard.

5E-JCA Series Jaw Crusher is designed for primary crushing of medium-hard, brittle and tough materials. Typical sample material includes coal, coke, limestone and so on. Jaw plates with BTMcr20 material are reversible for extended life. Patented design for easy and quick jaw gap adjustment provides good control of product sizing while minimizing downtime and labor service requirements.

• Automatic Grade: Automatic
• Capacity: 5tons
• Brand/Make: Rounak 2016+

• Type: Soil Compactors
• Certification: CE Certified, ISO 9001:2008
• Application: Compacting Grained
• Weight: 0-10kg, 10-20kg, 20-40kg, 40-80kg
• Color: Blue, Brown, Grey, Light White, Sky-blue, White
• Voltage: 110V, 220V, 380V, 440V, 580V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1yrs, 2yrs
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

The vibrating table is used for compacting concrete cubes and cylinders.

With the aim of providing best-in-class equipment, 1/2 Bag Concrete Mixer has been offered. These products are manufactured using qualitative materials and are offered with the assurance of optimum usage. We manufacture these products at our hi-tech infrastructure, leading to flawless characterization and durable features. Delivered within the promised time frame, these mixer bags are our valued offerings.   Specification   •Compaction capacity: 6.8 tons •Production capacity: 1/2 bag 5/3 CU.FT 150 litres •Power: 6 HP Air-cooled diesel engine (or) 3 HP electric motor •Bearings : URB , Nachi •Speed: 24 RPM •Material: Cast iron •Cone: Mild steel , 5mm thickness •Casting Drum : 20 mm •Tyres : Re built tyre with new rubber tube and used disc, hub and bearing

Hydraulic Steel Bar Bending Machine

hand tools, Cutting Tools, Machine Tools, nut fasteners

Concrete Pipe Making Machine

hand tools, Bar Cutting Machine, Safety Helmet, Hand Tool

Aac Block Making Machine

Power Floater, Concrete Cutting Machine, Kerb Cutting Machine, Power Trowel

hand tools, Bolts, Clamps, Drilling Machines, Hardware Tool

Washers, T bolts, spindle nut, Round Nut, Plain Washers, plain nut

We are offering washers.

Stone Block Cutting Machine

hand tools

Washers, Spanners, Screwdrivers, plumbing equipment, Nuts

Channel Letter Bending Machine, Foaming Vacuum Press Machine

Stone Crusher, Flour Mill Machinery, Rice Huller, PULVERIZER

hand tools, Building Construction Material, Drill Bits, Drilling Tools

building hand tools, building hardware tools, twisted wire brush

fully automatic coffee machine, tea processing machinery, Coffee Grinder

hand tools, mobile tool chests, Special Purpose Machines, Drilling Machines

Washers, Bolts, Clamps, Fasteners, Hangers, Nuts, RODS, Screws, Sockets

Washers, Shoulder Bolts, Industrial Screws, Industrial Nuts

Centrifuge Machine, Portable Autoclave, Horizontal High Pressure Autoclave