Control Panels Dealers in Ekkaduthangal, Chennai

• Power: 1-5 KW
• Voltage: 415V
• Ambient Temperature: 42 Degree C
• Material: Mild
• Frequency: 50Hz
• Current: 40 A
• Relative Humidity: 98%
• Surface Treatment: Paint Coated
• Ip Rating: IP65

• Phase: Three Phase
• Voltage: 440 V
• Automation Grade: Automatic
• Power: 60 KVAR
• Material: MS
• Display Type: Digital & Analog
• Application: Industrial Applications
• Surface Treatment: Powder Coating
• Country of Origin: Made in India
• Frequency: 50 Hz

Addressable Repeater panel repeats all the fault, fire statuses reported by the main control panel along with real time information to the advantage of the end user at a remote location. LAN cables are used to network repeater panel with the main control panel.

In the series of our products, we are also engaged in manufacturing and supplying a quality range of EB Metering Panels. For the benefits of our clients, these products are stringently tested on various parameters and are authenticated as per the international standards. All these products are highly appraised for their features like high tensile strength, durability and cost effectiveness.Features: Low maintenance , Low maintenance , Easy to install

We are pleased to introduce ourselves as the leading supplier of the above product, which is used to maintain the Power Factor (PF) above a specified limit. ELITE APFC Panel has a Micro-controller based Programmable Controller, which switches the Capacitor banks of suitable capacity Automatically, in multiple stages by directly reading the reactive load (RKVA) which works in the Principle of VAR Sensing, tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. The TNEB is installing the Digital Electronic Energy Meters for Power and Welding Service consumers having 25HP and above, which has the provision of showing the PF and insisting to maintain the average Power Factor above 0.85 Lag.   Install ELITE APFC Panel to avoid penalties and enjoy the benefits automatically.   WHAT IS POWER FACTOR (PF)? Power Factor is the ratio between the energy drawings (KVA) and the effective energy utilized (KW) i.e., PF=KW/KVA   WHY POWER FACTOR MUST BE MAINTAINED? By maintaining a better PF we can reduce the energy drawn (KVA), thus reducing the current passing through the electrical circuits to the maximum extent possible (even up to 50%) thereby reducing the down time, reduction in heat losses in turn increases the life of the equipment. Otherwise, for every reduction of 0.01 from 0.85 up to 0.75 PENALTY is 1% and below 0.75 it is 1.5% from 0.85 of the Current Consumption Charges (KWh) on your Electric Bill. INCENTIVE is also given by the Electricity Board when the PF is maintained above 0.90 @ 0.5 % for every increment of 0.01 on your Electric Bill.   HOW TO MAINTAIN THE POWER FACTOR? According to the load pattern, proper Capacity of Capacitors to be connected. The value of the capacitors to be connected will vary with respect to the load and its existing PF. There are two ways to maintain PF 1. Fixing the capacitors permanently at the load end or at the mains, generally which is recommended for the fixed loads like Pumps, fans etc., and it is not possible for the loads which have variations in the load and PF. 2. The Power Factor can be maintained by installing ELITE AUTOMATIC POWER FACTOR CONTROL PANEL.   ELITE Controller displays the following parameters. Voltage: R, Y & B Phases, Amps: R, Y & B Phases Present KILOWATT (utilizing current) Present RKVA demand (Required capacitors to attain UNITY power factor) Present KVA (drawing current),Present Power Factor (PF normally 0.99lag) No. of capacitor Banks ON or OFF,Provision to indicate Imbalance load Provision to indicate the change in phase sequence AEE’s PF Controller has built-in protections for High voltage cut-off AEE’s PF Controller has built-in protections for Low voltage cut-off The values and stages can be made as per customer’s request Higher Capacity Panels up to 450 KVAR can be supplied against Order IMPORTANT BENEFITS FOR INSTALLING FOR ELITE AUTOMATIC POWER FACTOR CONTROL PANEL Fully Automatic, no Manual Interventions is required. HEAVY Power Factor PENALTIES on the consumptions are ELIMINATED. INCENTIVES are received on every payment made. Optimize the capacity by reducing the maximum demand KVA. Avoids excess demand charges. Considerable REDUCTION in consumptions (KWH) charges. Improvement in line voltages. Excess Drawing of power is absolutely ELIMINATED. Reduced line current losses and cable overheat. Enhanced life of electrical circuits. Avoids overloading of Distribution Transformers. Additional service connections in existing generation of power by reducing energy losses. Reduced line losses benefits SEB’s and Nation. Avail DEPRECIATION as per Income Tax Depreciation Schedule. OUR PANEL COMPRISES OF VAR SENSING CONTROLLER with LCD display to show all the line parameters. 3 Nos of C.V.T’s (Current Voltage Transducers) of ratio 1:400 CAPACITORS of SIEMENS – EPCOS make – MPP type – 440 V / 50 HZ – Delta connected CONTACTORS to switch in & switch out the capacitors of ABB / SCHNEIDER/BCH make fixed individually to all the stage capacitors at 440 V / 230 V AC coil. MCB/ 3 Pole as Incomer of ABB / SCHNEIDER make. Provision of INDUCTOR COIL individually to all the capacitors to cater the in- rush currents. To Maintain the OPTIMUM POWER FACTOR load balancing to be Carried out in your Premises compulsorily. After providing our APFC panel the readings of KWH, KVAH, Pr.PF, Avg.PF from the EB meter has to be given to our office once in a week to monitor the improvement of PF.  

Features Over 18 years of experience in the field Adopted best engineering practices Comply with IEC 61439 Simplex / Duplex design Floor mounting and free standing type Unitised and Robust construction Constructed using powder coated sheet steel making it a highly reliable Provides high degree of protection of up to IP54 Fully extensible on both sides Swing / flush mounted front door options available Compatible with latest substation automation system (SAS) Provide comprehensive solution for substation automation system comply with IEC 61850 protocol Services Offered Engineering design Setting and programming of relays Setting calculation studies of relays Testing and commissioning

• Phase: Three Phase
• Power: Electric
• Material: Mild Steel
• Frequency: 50 Hz

• Brand Name: mootek
• Warranty: 3 YEARS
• Model Number: 485P
• Color: black
• Weight (Kg): 200G
• Mounting Type: DIN RAIL
• Material: iron
• Connector Type: Wired
• Approval: Fcc, CE, Rohs
• Number Of Ports: 2
• Power Supply (V): 9VDC power input
• Storage Temperature (deg. Celsius): -40C TO 85C
• Dimension (mm): 93.0mm,62.4mm,22.0mm
• Shell: IRON
• Humidity (%): 5% TO 95%
• Flow Control: Data direction auto-turnaround, no flow control is required
• Standard: EIA RS-232C, RS-422 standard
• Model Name: serial converter
• Baud Rate: 300
• Isolated Converter: Yes

  Control Panels for controlling heater output are offered with digital/analog temperature controller, thermocouples, and necessary indicating devices. They can be made strictly as per customer specifications

• Type: Lever Limit Switch
• Material: Metal
• Certification: ISI Certified
• Color: Orange
• Condition: New
• Max. Voltage: 500 V.A.C. Max
• Switch Type: Lever Limit Switch
• Current Rating: 10 Amps
• Application: Eot Crane use

• Application: Office
• Brand Name: MIRCOM
• Model Number: Fx2000
• Voltage: 24 Volt
• Frequency: 50 Hz
• Material: MS Powder Coated Body
• Color: RED
• Zones: 2 Loop
• IP Rating: IP50

• Type: Solar Panel
• Application: Industrial, Toproof
• Power Source: Solar
• Efficiency: 90%
• Warranty: 1Year

With our years of experience, our company name figures amidst the most responsive and responsible Suppliers of electrical panel board accessories. Interested buyers can contact us anytime for placing orders; we ensure timely delivery of the same.

• Degree of Protection: IP44
• Operating Voltage: 240 - 440 V
• Type of Control Panel: Indicator Light
• Usage/Application: Industrial
• Phase: 3 - Phase
• Body Material: Stainless Steel
• Frequency: 50 Hz

CB32 Wireless Control Panel This is extremely small and compact wireless control panel designed for use in security systems, burglary and emergency alarms, access control in houses, offices and other premises. The panel can be operated by up to 16 users and controls up to 32 wireless Elmes detectors. In addition, its two perimeter wired inputs allow connection of any two wired detectors. Selected standard features and options include: two modes of partial arming. Monitoring and alarming with the use of mobile GSM phones. keypad and hand transmitter arming and disarming; Event registering of the last 256 events timed by internal real time clock. Two internal backup rechargeable batteries allow autonomy operation on mains supply failure. Fitted hardware features include internal acoustic siren, three user-defined universal programmable outputs intended for connection of external signaling and alarming devices. Clear lit LCD readout display, on-board power supply for connected external mobile phone and full size keypad for easy programming and daily arming/disarming operation. Technical Specification Dynamic code system KEELOQ of Microchip Corp. USA Operating frequency: 433,92 MHz 32 wireless zones 2 parametric wired zones 16 users (4 administrators) Power supply: 12V DC Built-in rechargeable batteries (2 x AA) Built-in accoustic signalisator 92dB GSM notification of system status via Elmes GSM module Compatible with all Elmes wireless detectors Controls 1 wireless signalisator WSS Operating temperature range from 0 to + 40C, External dimensions without antenna: 110/122/32mm.

we offer Programmable Temperature Control Panel. Program 9 profile with 163264 steps program Manual , OnOff, PID with Fuzzy Logic Control Controller Accept input RTDs Thermocouples Three Phase Mains Operated Three phase Heater Control Output Control Device Contactor or Solid state Relay or Tyristor Capacity available 254070100120 A Fabricated wit Stainless Steel or MS with Powder Coated Temperature Range 50 to 1200 º C ( customized)

• Working space :: 355 * 355* x 460mm
• Capacity (approx) :: 19 Kg
• No. of tray :: 3 Nos
• Temperature: 350oC
• Input power :: 6 kW

  To meet the needs of industrial oven control, we, at Bali instruments provide both types of oven control panels, the standard oven control panels and customized oven control panels. These SCR based control panels are prewired and the unit is self-contained. This makes it super easy to install where you simply need to connect the power lines, heater wires and thermocouples. TECHNICAL SPECIFICATIONS Model – BIEO-1 Working space : 355 * 355* x 460mmCapacity (approx) : 19 KgNo. of tray : 3 NosTemperature range : ambient – 350oCInput power : 6 kWInput current : 9AmpAccuracy : ± 3 oCInput supply : 220/230VAC, Single phase AC, 50 HzType of control : Digital Temperature Controller with Air Circulation Fan

In the series of our products, we are also engaged in manufacturing and supplying a quality range of eb metering panels. For the benefits of our clients, these products are stringently tested on various parameters and are authenticated as per the international standards. All these products are highly appraised for their features like high tensile strength, durability and cost effectiveness. features: low maintenance low maintenance easy to install.

• Brand Name: GEESYS

We are offering power command control, is a microprocessor based generator set monitoring, metering, protection and control system. It offers advanced levels of functions for reliability and optimum genset performance. The power command control with digital paralleling control devices such as synchronizers and load sharing controls, and kvar power factor controls.

• Application: Commercial,Residential
• Warranty: 0-5 Yrs,5-10 Yrs,10-15 Yrs,15-20 Yrs
• Material: Aluminium,Stainless Steel
• Power: Solar
• Output Voltage: 220 V,240 V
• Frequency: 50 Hz,60 Hz,70 Hz

All type of industries. IT Parks Commercial establishments   Models & Amps/ Kva Rates: Upto 800 Kvar Features   Auto/Manual selector is available Stage on indications are available Stage to stage capacitor boosting & reconnection intervals; Panel mountable, serviceable Working temperature up to 45 degree celcius Cable entry: Bottom (top optional) Incoming control and total protection of panel with 3pole/ MCCB Power & control wiring: by copper multi strand ISI wire Capacitor bank rating:440v/according to your load required KVAR For standard safety on Capacitor efficiency losses, Hunting etc., IEC (International Electric Code) Standards Higher, Healthy PF maintaining (between 0.94-0.99) brings Good quality & Healthy run of your induction load(Motors , Air conditioners, compressors, chokes, etc It adds life to your, A/C, Tube lights, Compressors, Motor & other loads Off course, great escapes from the penalty from the electricity Board Chance of getting good incentive from the electricity Board   The APFC Panels helps in saving the power and is efficient enough to be used in windmills, micro processors and in LT & HT factories.     They are also used for analyzing line voltage and for monitoring current harmonic. It is equipped with independent fuses and has a rust proof steel material.      

• Material: Aluminium Alloy
• Phase: Three Phase
• Mounting Type: Panel
• Automatic Grade: Semi-Automatic

• Average PUF Density: 40 ± 2 Kg/ cu.mtr/ m³
• PUF Blowing Agent: 141B (CFC free)
• Insulation Material: Polyurethane foam
• Polyurethane foam: +90°C to -60°C
• Penal Type: Discontinuous type with cam lock
• M.O.C. Of Cam Locks: Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement
• Type Of Panel Joints: Tongue & Groove Joint with Cam lock and all side rubber gaskets
• Corner Panel Available: 12” X 12” X 162”(Maximum Length)
• Length of wall & ceiling panel: 2032 mm to 12000 mm 80” to 472.5” inch
• MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load dis: 90 to 95%
• Vapour Permeability: 5.5mg/PASM.
• 5.5mg/PASM.: Less than 2%
• Less than 2%: Less than 2%
• Compressive Strength at 10% Deformation: 0.21 N/ sq.mm (For PUF only)

Frame work made of Rectangular M.S. Tube MS Perforated Sheet plateform in four sections Back Rest, Knee Rest, TB/RTB and Hi-Lo Positions obtained by electric actuator operate by hand remote system ABS moulded head and foot Panels. ABS tuck away safety side Railing. Telescopic IV Rod with two Locations Bed Moulded on 125 mm Dia Castor with central Braking system. Overall Size: 210L x 90W x 50-70Hcms. Finish: Epoxy Powder Coated

LT Panel Board, Air Insulated Bus Duct, ht panel board

We are identified as one of the most reputed Suppliers of Electrical Control Panels with various technical specifications. Our Industrial Power Control Panel is highly effective to meet all kinds of Industrial needs. Our control Panel is easy to set up and operate. Our Tonnage Monitor and Brake Monitor, display all the units clearly that assures precise reading. With strong manufacturing capabilities, we are able to provide Custom Control Panels in various specifications desired by the clients. In addition to the above facts, we offer these Panels at the most reasonable prices.

PLC, VFD Panels, IP20IP65IP67 Panels Contactor Panel,Isolator Panels Relay Metering Panels, Relay Panels, Changeover panel,Lightning Distribution Board

Our organization offers an extensive range of Pneumatic Control Panels to our clients. With the help of our experts, we offer a superior range of Pneumatic Panels to our clients.These are fabricated using best grade raw materials in accordance with industry standards. Further, our range is engineered with utmost precision to enhance its extensive utilization in pressurized systems in varied industries. It is acknowledged for the easy installation and high performance We offer a high quality pneumatic Control panel duly assembled with world's reputate make like      FESTO,SMC,CAMOZZI etc.... These pneumatic Control panels are customised design and can withstand rugged enviornments like      industrial,mobile, Onshore and offshore application  

ReliGo Solar system started in order to meet the scarcity of electricity in Tamil Nadu and increasing power rates. We offer wide range of Solar products like Solar home lighting systems, solar roof-top systems, solar power packages for home & Schools, solar power plants for colleges, hospitals, small scale industries and commercials buildings & shops. Our solar power plants for Schools, colleges, SME'S, Office, home rooftop systems are affordable and cost-effective where we give solar packages at best price in industry. We have our head office in Chennai and branch office in Madurai. We installed solar home lighting systems in Chennai, Thanjavur, Madurai, Coimbatore and other cities in Tamil Nadu.

Electrical Control Panels, SERVO VOLTAGE STABLIZER, Transformers