Back Back
Water Flow Meter
A Water flow meter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas. When choosing Water flow meter, one should consider such intangible factors as familiarity of plant personnel, their experience with calibration and maintenance, spare parts availability, and mean time between failure history, etc., at the particular plant site. Water flow meter is also recommended that the cost of the installation be computed only after taking these steps. The Water flow meter consists of a body, a measuring unit, a register unit, a retaining ring and others. The retaining ring secures the internal parts. The fluid and Water flow meter given and its pressure, temperature, allowable pressure drop, density , conductivity, viscosity and vapor pressure at maximum operating temperature are listed, together with an indication of how these properties might vary or interact. In addition, all safety or toxicity information should be provided, together with detailed data on the Water flow meter fluid's composition, presence of bubbles, solids , tendency to coat, and light transmission qualities .
...more
Stp Plant
STP Plant is the process of removing contaminants from wastewater, primarily from household sewage. It includes physical, chemical, and biological processes to remove these contaminants and produce environmentally safe treated wastewater (or treated effluent). A by-product of STP Plant is usually a semi-solid waste or slurry, called sewage sludge, that has to undergo further treatment before being suitable for disposal or land application. STP Plant may also be referred to as wastewater treatment, although the latter is a broader term which can also be applied to purely industrial wastewater. The STP Plant process is similar to the way that a Septic Tank works but mechanical components provide a process to help break down solids to produce a cleaner, more environmentally friendly effluent. Now a days the STP Plant became statutory requirement of all the State Pollution Control Boards, everybody, whether Hotelier or Industrialist were looking for economical, easy to install and operate compact type Sewage Treatment Plant.
...more
Sewage Treatment Plant
Sewage Treatment Plant is the process of removing contaminants from wastewater, primarily from household sewage. It includes physical, chemical, and biological processes to remove these contaminants and produce environmentally safe treated wastewater (or treated effluent). A by-product of Sewage Treatment Plant is usually a semi-solid waste or slurry, called sewage sludge, that has to undergo further treatment before being suitable for disposal or land application. Sewage Treatment Plant may also be referred to as wastewater treatment, although the latter is a broader term which can also be applied to purely industrial wastewater. The Sewage Treatment Plant process is similar to the way that a Septic Tank works but mechanical components provide a process to help break down solids to produce a cleaner, more environmentally friendly effluent. Now a days the Sewage Treatment Plant became statutory requirement of all the State Pollution Control Boards, everybody, whether Hotelier or Industrialist were looking for economical, easy to install and operate compact type Sewage Treatment Plant.
...more
Online Flow Monitoring System
Online Flow monitoring system is comprised of three primary parts: a wireless-enabled Hach FL900 Series flow logger, a FLO-DAR AV sensor, and FSDATA Online Data Manager software. The wireless FL900 logger connects with all major national cellular providers and allows users to review and analyze flow data in real-time from Online Flow monitoring system. Online Flow monitoring system is both convenient and cost efficient as users can eliminate the need for regular site visits for data retrieval. Also, wireless technology makes site alarming possible. With Online Flow monitoring system users can receive instant notification, through e-mail or texts, letting them know of extreme flow changes—high or low—at each site. These Online Flow monitoring system are extremely versatile. They have been developed specifically for the toughest multiphase process flows and for those areas where cutting the process pipe is not desired.
...more
Effluent Treatment Plant
Effluent Treatment Plant is the process of removing contaminants from wastewater, primarily from household sewage. It includes physical, chemical, and biological processes to remove these contaminants and produce environmentally safe treated wastewater (or treated effluent). A by-product of Effluent Treatment Plant is usually a semi-solid waste or slurry, called sewage sludge, that has to undergo further treatment before being suitable for disposal or land application. Effluent Treatment Plant may also be referred to as wastewater treatment, although the latter is a broader term which can also be applied to purely industrial wastewater. The Effluent Treatment Plant process is similar to the way that a Septic Tank works but mechanical components provide a process to help break down solids to produce a cleaner, more environmentally friendly effluent. Now a days the Effluent Treatment Plant became statutory requirement of all the State Pollution Control Boards, everybody, whether Hotelier or Industrialist were looking for economical, easy to install and operate compact type Effluent Treatment Plant.
...more
Diesel Flow Meter
Diesel Flow Meter Measurement from our side is a remarkable and ace product. The low pressure drop through the meter makes the meter ideally suited for use in gravity applications. This product from our side is a masterpiece and has proven to be a highly reliable and highly accurate method of measuring Diesel Flow Meter , providing exceptional repeatability and high accuracy. On-time delivery is something that we always follow. Protect the Diesel Flow Meter by installing a strainer or filter inline upstream of flow when using the primary filters only, and on the discharge side so secondary filters remove large particulates before fuel enters meter. End users employ Diesel Flow Meter to monitor diesel fuel consumption in the automotive, marine, aerospace and power generation industries, among others. Diesel Flow Meter used in this application must be able to withstand extreme temperature swings in the installation environment.
...more
clamp on ultrasonic flow meter
Clamp-On Ultrasonic flow meters are designed for applications where a customer is unwilling or unable to cut into the process measurement line to install an in-line meter. Available in configurations for pipe line sizes from DN15 to DN4000 (12” to 160”), the Clamp-On Ultrasonic flow meter design offers a cost-effective means of measuring liquid flow through a pipe. With designs that can withstand up to 200˚C (392˚F), this Clamp-On Ultrasonic flow meter technology is ideal for liquids with limited solids or gas content. Because Clamp-On Ultrasonic flow meter mounts on the outside of the pipe, there is no need to worry about material compatibility with the process being measured or the pressure in the pipeline. Clamp-On Ultrasonic flow meter is ideal for users looking for a process measurement device that is easy to install and can maintain flow measurement for clean liquids.
...more
bio gas plant
Bio-gas plant manufactures is produced by the anaerobic digestion with fermentation of biodegradable materials e.g. sewage, municipal waste, kitchen waste, green waste, etc... Bio-gas plant manufactures can be produced from regionally available raw materials and recycled waste and it is environmentally friendly. Bio-gas plant manufactures comprises with Methane (CH4), Carbon dioxide (CO2) and hydrogen sulphide (H2S). These Bio-gas plant manufactures will be oxidized with oxygen then it releases Bio-gas plant manufactures to be used as fuel for cooking or heating purpose.
...more
BIO GAS FROM SOLID WASTE
Biogas from solid waste is a mixture of about 55% methane and 45% CO2 and other trace contaminate gases. The gas is created from anaerobically decaying organic matter. Biogas from solid waste is produced by means of a process known as anaerobic digestion, whereby organic matter is broken down by microbiological activity and, as the name suggests, takes place in the absence of air. Biogas from solid waste in any form is ideal for the Biomethanation concept, which is the central idea of the Nisargruna Biogas plants. BARC Mumbai based on thermophilic microorganisms and microbial processes develop the design of the biogas from solid waste plant. The plant is completely gravity based. Biogas from solid waste makes our energy production safer.Biogas from solid waste has no negative implications on the environment and is one of the cleanest fuels available. Biogas from solid waste plants can be utilised by both urban and rural population, industry as well as households. The biogas from solid waste produced provides smoke free fuel to your kitchen, can be used to fire boilers or for electricity generation.
...more
Bio Gas
Biogas Cow dung is used in many developing countries for generating energy. It has a lot of potential to reduce carbon footprint. By capturing and storing CO2 from biogas into the ground, the Biogas Cow dung becomes carbon negative and scrubs our past CO2 emissions out of the atmosphere. The Biogas Cow dung fuels the engine, which in turn spins an electric generator to create electricity. Waste heat from the engine is used to keep the digester warm and offsets fuel purchase on the farm. Gas engines require about 0.5 m3 of methane per horsepower per hour. Some care must be taken with the lubrication of engines using solely Biogas Cow dung due to the “dry” nature of the fuel and some residual hydrogen sulphide, otherwise these are a simple conversion of a gasoline engine. The big plant is a co-operation between agriculture, local government and district heat stations and will purify livestock manure, while at the same time produce heat and electricity to the nearby cities of Holstebro and Struer. The organic wastes were allowed to stabilise, anaerobic fermentation involving the degrading of the wastes by the action of various microbes of different sizes and functions, leading to the production of Biogas Cow dung in the absence of oxygen was achieved.
...more
bio gas plant
Bio-gas plant manufactures is produced by the anaerobic digestion with fermentation of biodegradable materials e.g. sewage, municipal waste, kitchen waste, green waste, etc... Bio-gas plant manufactures can be produced from regionally available raw materials and recycled waste and it is environmentally friendly. Bio-gas plant manufactures comprises with Methane (CH4), Carbon dioxide (CO2) and hydrogen sulphide (H2S). These Bio-gas plant manufactures will be oxidized with oxygen then it releases Bio-gas plant manufactures to be used as fuel for cooking or heating purpose.
...more
MOBILE DIESEL DISPENSER
Compressed Air Flow Meter
In Line Flow Meter
Vortex Flow Meter
Portable Ultrasonic Flow Meters
Truck Flow Meter
Vortex Gas Flow Meter
Temp And Humidity Meter
Lorry Diesel Dispenser
Dispensing and Filling Systems
Engine Fuel Consumption Monitors
2 Wire Ultrasonic Level Transmitter
Pressure Sensor
operation and maintenance of ETP
O&M of Effluent Treatment Plant
Operation and Maintenance of RO
Real Time Flow Monitoring System
WTP Packages for Waste Water Recycling
Reviews & Ratings
Write a ReviewBe first to Rate
Rate This
Share your Correspondence Details to receive messages from Cryogenic Process Controls
Post Free Ad