Demineralisation Plant Dealers in Chennai

We are offering a wide assortment of Iron Filtration Plant for industrial as well as commercial use. Our Iron Filtration Plant is filled with Mi02 (Maganese Oxide) and is mainly Pretileration and Iron Filter. It has low installation & maintenance cost and provides long service life. We are a well-known Supplier of Iron Filtration Plant from Chennai, Tamil Nadu. We make them available at highly affordable prices. Also, we ensure a quality tested Iron Filtration Plant is delivered to our valuable buyers. Type : Commercial Type Industrial Type

• Voltage: 380 V
• Material: Mild Steel
• Frequency: 50 Hz
• Usage/Application: Water Filtration
• Flow Rate: 100 m3/hour
• Automatic Grade: Automatic
• Brand Name: Canadian Clear

Backed by a state-of-the-art infrastructure facility, we are capable of manufacturing and supplying a vast range of Water Demineralization Plants. Based on reverse osmosis technology, these are widely considered among our customers. In addition to this, the entire range of the water demineralization plants offered by us is highly popular for its easy maintenance and longer functional life.   Features: Opulent working Smooth finishing Smooth filtering Compact Designing Fine-finish Blissful working High durability

 We are manufacturing of water softener plant in chennai, home water softener, commercial water softener, industrial water softener. 

• Brand Name: VEPL
• Driven Type: Electric
• Color: Grey
• Condition: New
• Power: 1-3kw
• Application: Treating Hard Water
• Certification: CE Certified
• Voltage: 220V
• Type: Automatic
• Warranty: 1year, 1 Year
• Country of Origin: India

Our demineralisation plant performs efficiently in purifying and removing varieties of impurities from water.

Demineralisation Plant is a plant that generally consists of cation, anion, and mixed bed exchangers. Any ions in the final water from this process consist essentially of hydrogen ions and hydroxide ions, which recombine to form pure water. Very pure DM water becomes highly corrosive once it absorbs oxygen from the atmosphere because of its very high affinity for oxygen.The capacity of our Demineralisation Plant is dictated by the type and quantity of salts in the raw water input. However, some storage is required if the DM plant is under maintenance. For this purpose, a storage tank is installed from which DM water is continuously withdrawn for boiler make-up. The storage tank for DM water is made from materials not affected by corrosive water such as PVC. The piping and valves are generally made of stainless steel. Sometimes, a steam blanketing arrangement or stainless steel doughnut float is provided on top of the water in the tank to avoid contact with air. DM water make-up is generally added at the steam space of the surface condenser. This arrangement not only sprays the water but also DM water gets deaerated, with the dissolved gases being removed by an air ejector attached to the condenser.We are instrumental in providing our clients with Demineralisation Plant that makes use of ion exchange technology, which is used to remove salts (cations and anions) from the water soluble chemical compounds, when dissolved in water, become ionized; that is their molecules dissociate into positively and negatively charged components called ions. Consider common table salt and sodium chloride. In its solid form, this compound consists of one sodium atom (na) and one chlorine atom (cl) tightly coupled together (nacl). When dissolved in water, however, the compound splits into two ions, na and cl. We are one of the trusted fabricators of Demineralisation Plant, which is based on ion exchange technology for removal of salts (cations and anions). This removal process of salts from the water soluble chemical compounds takes place when they get dissolved in water. Our Demineralisation Plant is fabricated using corrosion resistant material and can be customized according to the requirements of the clients.

• Driven Type: Electric
• Condition: New
• Type: Ion Exchange Equipment
• Warranty: 1yrs
• Country of Origin: India

The basic unit consists of two columns, one contains cation resin and the other contains anion resin. The feed water is pumped by a FHP pump and the capacity of the ion exchanger is 50 lph.

• Type: Plant
• Application: Industry
• Motive Force: Electric Power
• Min. Order Quantity: As per client requirement

we are trustworthy manufacturer, exporter and supplier of demineralization plant, (dm plant) which is duly tested by our experts on different parameters of quality so that the perfect range is delivered to the clients. The demineralization plant (dm plant) is in high demand among the clients. Our product demineralization plant (dm plant) is precisely designed by our team of experts maintaining the market standards.features : rust free low maintenance less power consumption durable economical high shelf life working : the plant is loaded with highly efficient cation and anion exchanger loaded with degasification system to remove every trace of minerals from the system the raw water called influent water is first passed through the cation resin bed containing sac resin in h + form. Ca , mg & na are removed and the salts are converted to their respective acids the corresponding acid containing anions like cl , so4 , no3 are removed by passing the cation effluent through anion column containing anion resin in hydroxyl form the hydrogen ion from cation neutralizes the hydroxyl ion and produces pure water the demineralization bed is provided with strong cations and anions to produce 100% pure water supplied to : alcohol and distillery boilers cooling tower cold storage food processing industry dairy industry fisheries and poultry

Water Demineralization Plant operates on the demineralization process that efficiently removes mineral salts from water by using the process of ion exchange. Our Water Demineralization Plant is highly demanded by the clients owing to its excellent performance, easy operation, less power consumption and low maintenance. Water Demineralization Plant is widely applied in chemicals, pharmaceuticals, breweries, hospitals, potable water, swimming pools, etc.

The demineralization is the process of removing mineral salts from water by using ion exchange process. The D.M water reduces the scale formation, Deposition and corrosion of tubes. It increases the life of pipes and tubes in plant. It prevents the deposition of minerals in turbine blades. It removes Mineral salts in the form of cations such as sodium, calcium, iron, copper and anions such as chloride, sulphate , nitrate etc.   MIXED BED UNITS:-   After passing water through cation then anion exchanger it is passed through mixed bed unit. In mixed bed cation and anion resins are mixed and while water passes through it as it passes through thousands of cation/anions exchanger ‘resulting final effluent of very good quality water.     Application   Pharmaceutical industry Boiler industry Sterilization industry

Water Filtration Plant offeredfids extensive use in various industry sectors and provides support for continuous production of water through advanced membrane treatment process support. This allows for pure water as output as per the specific requirements of different industry sectors. These plants also provide for enhanced silica, heavy metal and organic carbon removal that is present in water. Some of its features include latest technology based reverse osmosis membranes for optimum performance support, provides for longer service life, low operation costs, provides for stable and high output water quality, allows for real-time monitoring of water quality, touch screen based operations and others.

• Material: Metal
• Capacity: 2000 L/H
• Style: Vertical

We are main supplier of this product.

Pacific Enviro offers De-Mineralization The demineralization process utilizes acid regenerated cation resin & caustic regenerated anion resin to remove minerals from water. We offer DM Plants of different sizes as per requirement of the customers. Trolley mounted automatic operation DM Plants are also available for small industries and laboratories.

The clients in India as well as abroad can avail hi-tech Demineralisation Plant from us. The Demineralisation Plant, we manufacture is a Two-bed water de-ioniser and is made as per the set standards of the industry. The clients can avail the Demineralisation Plant from us in varied specifications as per the requirement. The running costs of the Demineralisation Plant come out to be very low and it is designed for consistent qualitative performance. Details Consists of two FRP/MS rubber lined pressure vessels that are connected in series along with its internal fittings1st vessel consists of strongly acidic cation exchange resin that converts the positive ions of salt and replaces them with hydrogen the ions to form respective acidsThe formed acids are absorbed in the next vessel by strongly basic anion exchanges resin

Ultra Filtration is a separation process using membrane of pore sizes in the range of 0.1 to 0.001 micron. Typically, Ultra filtration will remove high molecular-weight substances, colloidal materials, and organic and inorganic polymeric molecules

Ultra Filtration Plants are used in PRE-Ro applications  to reduce Turbidity and protect RO Systems, Concentration in Fruit juice / Food Industry, Separation in Oil / Pharma Industry. Ultra Filtration  Plants  are built using Hollow Fibre Membranes to 100KD with  full automatic system. Membranes to other MWCO are used for specific applications. Filtration, Backwash & Flush  – both upward & downward direction and with Air Scouring Facility through Automatic Valves, level  &  pressure controls are provided. Skid Mounted Systems inbuilt with CEB and Dosing Systems. Automation through Auto controller, PLC, HMI, Touch Screen/ Mimic Panel, Scada Technical Details DESIGN BASED ON SOURCE WATER QUALITY, REQUIRED OUTPUT WATER CHARACTERISTICS. FLUSH, FILTRATION AND BACKWAASH – UP & DOWN CYCLIC OPERATIONS CEB SYSTEMS AND DOSING SYSTEMS INBUILT IN SKID LEVEL, FLOW, PRESSURE INSTRUMENTS PROVIDED BUILT WITH OUT-IN FLOW OR IN-OUT FLOW UF MEMBRANES

HATCO offer wide range of UF systems as per customer requirement , we design Ultrafiltration plants for various applications like RO pre treatment, drinking water, ETP, STP and customised requirement. Ultrafiltration is a separation process using membranes with pore sizes in the range of 0.1 to 0.001 micron. Typically, ultrafiltration will remove high molecular-weight substances, colloidal materials, and organic and inorganic polymeric molecules. Low molecular-weight organics and ions such as sodium, calcium, magnesium chloride, and sulfate are not removed. Because only high-molecular weight species are removed, the osmotic pressure differential across the membrane surface is negligible. Low applied pressures are therefore sufficient to achieve high flux rates from an ultrafiltration membrane. Flux of a membrane is defined as the amount of permeate produced per unit area of membrane surface per unit time. Generally flux is expressed as gallons per square foot per day (GFD) or as cubic meters per square meters per day. Ultrafiltration membranes can have extremely high fluxes but in most practical applications the flux varies between 50 and 200 GFD at an operating pressure of about 50 psig in contrast, reverse osmosis membranes only produce between 10 to 30 GFD at 200 to 400 psig. Ultrafiltration, like reverse osmosis, is a cross-flow separation process. Here liquid stream to be treated (feed) flows tangentially along the membrane surface, thereby producing two streams. The stream of liquid that comes through the membrane is called permeate. The type and amount of species left in the permeate will depend on the characteristics of the membrane, the operating conditions, and the quality of feed. The other liquid stream is called concentrate and gets progressively concentrated in those species removed by the membrane. In cross-flow separation, therefore, the membrane itself does not act as a collector of ions, molecules, or colloids but merely as a barrier to these species. Conventional filters such as media filters or cartridge filters, on the other hand, only remove suspended solids by trapping these in the pores of the filter-media. These filters therefore act as depositories of suspended solids and have to be cleaned or replaced frequently. Conventional filters are used upstream from the membrane system to remove relatively large suspended solids and to let the membrane do the job of removing fine particles and dissolved solids. In ultrafiltration, for many applications, no prefilters are used and ultrafiltration modules concentrate all of the suspended and emulsified materials. There are several factors that can affect the performance of an ultrafiltration system. A brief discussion of these is given here. Flow Across the Membrane Surface: The permeate rate increases with the flow velocity of the liquid across the membrane surface. Flow velocity if especially critical for liquids containing emulsions or suspensions. Higher flow also means higher energy consumption and larger pumps. Increasing the flow velocity also reduces the fouling of the membrane surface. Generally, an optimum flow velocity is arrived at by a compromise between the pump horsepower and increase in permeate rate. Operating Pressure: Permeate rate is directly proportional to the applied pressure across the membrane surface. However, due to increased fouling and compaction, the operating pressures rarely exceed 100 psig and are generally around 50 psig. In some of the capillary-type ultrafiltration membrane modules the operating pressures are even lower due to the physical strength limitation imposed by the membrane module. Operating Temperature: Permeate rates increase with increasing temperature. However, temperature generally is not a controlled variable. It is important to know the effect of temperature on membrane flux in order to distinguish between a drop in permeate due to a drop in temperature and the effect of other parameters.

We are listed at the apex in the list of the well-reputed DM Plant Exporters and Suppliers in India. The unmatched quality and unsurpassable performance has attracted various national as well as international clients are placing bulk orders for the Demineralisation Plant. The use of optimum quality materials in the manufacturing of the DM Plants ensures high durability, tensile strength and resistivity to adverse conditions. Additionally, customers are eased with the availability of the different Industrial DM Plant like Strong Acid Cation & Strong Base Anion, WAC, WBA, DGT and Mixed Bed Units.

The process by which the minerals present in the raw water are removed by Ion Exchange process is known asDemineralisation. The removal of these minerals are very important as otherwise these minerals form deposits in pipelines and equipments which lead to reduced waterflow and heat transfer efficiency over a period of time which ultimately affects the life of the equipment. The Demineralisation Plants find application in high pressure boilers, power generations plants, Hi-tech electronic industries, pharmaceutical and other process industries etc. Basically the removal of minerals are carried out in the Cation exchanger and Anion exchanger of the DM plant. The fill media in these exchangers are Cation and Anion resins respectively. Different types of Demineralisation plants are available depending on the quality of water required by the end-user. Cations:- Calcium, Magnesium, Sodium & PotassiumAnions:- Chlorides, Sulphates, Nitrates, Phosphates & Silica  

• Country of Origin: Made in India
• Brand Name: SKY
• Automatic Grade: Semi-Automatic
• Flow Rate: 100 m3/hour

• Capacity (m3/hr): 2.0 m3/hr
• Body Material: Polypropylene (PP)
• Material of Construction: FRP, Stainless steel
• Automation Grade: Automatic
• Softener Tank Type: Vertical
• Water Source: Borewell Water

• Capacity: 50 mᶟ/hr

A mixed bed exchanger has both cation and anion resin mixed together in a single vessel. As water flows through the resin bed, the ion exchange process is repeated many times, "polishing" the water to a very high purity. During regeneration, the resin is separated into distinct cation and anion fractions. The resin is separated by backwashing, with the lighter anion resin settling on top of the cation resin. Regenerant acid is introduced through the bottom distributor, and caustic is introduced through distributors above the resin bed. The regenerant streams meet at the boundary between the cation and anion resin and discharge through a collector located at the resin interface. Following regenerant introduction and displacement rinse, air and water are used to mix the resins. Then the resins are rinsed, and the unit is ready for service.

• Condition: New
• Brand Name: SOUTHERN LUBE
• Automation Grade: Automatic
• Customization: Customized
• Minimum Order Quantity: 1 Unit

We are the manufacturers, exporters and supplier of this products.

We provide our clients a wide range of de-mineralized water treatment plants that are used for conditioning water for high pressure boilers, conditioning other process and for rinsing water. It includes the ion-exchange system that is chosen very accordingly to the volumes and composition of the raw water. If silica removal is not required, our treatment systems may consist of a hydrogen cation exchanger unit and a weekly basic anion exchanger unit usually followed by a degasifier. This de-mineralized water treatment plants removes impurity by aeration of most of the carbon dioxide formed from the bicarbonates

A Demineralisation Plant consists of two pressure vessels containing cation and anion exchange resins. Various types of ion exchange resins can be used for both the cation and the anion process, depending on the type of impurities in the water and what the final water is used for.Typically, the cation resin operates in the hydrogen cycle. The cations in the water (i.e. calcium, magnesium and sodium) pass through the cation exchange resin where they are chemically exchanged for hydrogen ions.The water then passes through the anion exchange resin where the anions (i.e. chloride, sulphate, nitrate and bicarbonate) are chemically exchanged for hydroxide ions.The final water from this process consists essentially of hydrogen ions and hydroxide ions, which is the chemical composition of pure water. The simplified demineralisation plant consists of:Composite resin vessels with charge of strong cation and anion resin; control-panel encompassing a conductivity measurement and alarms, etc; acid and caustic injection facility from bulk, semi-bulk or carboy containers.

• Condition: New
• Feature: Hospitals, Chemical and pharmaceutical industries , Power plants.

• Filter Type: Cartridge Filter
• Automation Grade: Manual
• Flow Rate: 3000-4000
• Body Material: Mild Steel
• Tank Capacity: 10000 Ltr
• Purification Capacity: 1000 L/hour

DM Plant is an Ion exchange technology used to remove salts (cations and anions) from water. Soluble chemical compounds, when dissolved in water, become ionized; that is their molecules dissociate into positively and negatively charged components called ions.   Demineralized water also known as Deionized water, water that has had its mineral ions removed. Mineral ions such as cations of sodium, calcium, iron, copper, etc and anions such as chloride, sulphate, nitrate, etc are common ions present in water. Deionization is a physical process which uses specially-manufactured ion exchange resins which provides ion exchange site for the replacement of the mineral salts in water with water forming H+ and OH- ions. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup. De-mineralization technology is the proven process for treatment of water. A DM Water System produces mineral free water by operatig on the principles of ion exchange, Degasification, and polishing. Demineralized Water System finds wide application in the field of steam, power, process, and cooling

Avail the most reliable Nano Filtration plant from a professionally well managed organization. We stand as most trusted water Filtration plant manufacturer in India. We offer the most effective range of nano filtration plant that efficiently separates various ions and fluids. This NanoFiltration water plant is manufactured using high quality raw materials to ensure their durability. Besides, it is highly resistant to corrosion and abrasion. In addition to this, we also provide the facility of installation and post sales treatment. These nano filter plant is offered in various dimensions ranging from 500 LPH to 1, 00,000 LPH.

We are instrumental in offering Reverse Osmosis Plant, which is used in various industries to remove the impurities and suspended particles within water. Designed with precision, these Reverse Osmosis Plants are highly demanded in the domestic as well as international market. Moreover, we provide timely delivery of the products at stipulated timeframe. Applications : Housing societiesIndustries Specifications : Technically Hygienically Beautifully Superior0.0001 Micron Filtration 99.9% Purified Water