Digital Meters Dealers in Perungudi, Chennai

Features: Displaying: LCD Displaying Max. Displaying: 1999 (3 ½ Digit) Auto Polarity indication. Low battery indication Operation environment: (0~40) °C, RH.

The most important parameters needed for water analysis, especially in drinking water, can be measured with Hanna’s HI93102 portable meter. This instrument not only measures turbidity, but also free and total chlorine, cyanuric acid, pH, iodine, bromine, and low range iron. Measurements are made quickly and accurately through a sophisticated, yet easy-to-use microprocessor. Users can select between pre-programmed calibration values or calibration points can be customized at a specified concentration or relative absorbance of the sample. The HI93102 offers many features that appeal to use in the field as well as in laboratory settings. The exclusive cuvette locking system ensures that the cuvette is inserted into the measurement cell in the same position every time to maintain a consistent path length. Up to 25 measured samples can be stored in memory, together with time and date. Miniaturization of the electronics has made it possible to o‰ffer unsurpassed accuracy and quality in a portable unit weighing just one pound.   Features at-a-glance AMCO AEPA-1 Primary Turbidity Standard - The AMCO AEPA-1 standards for the turbidity range of the HI93102 are recognized as a primary standard by the USEPA. These non-toxic standards are made of styrene divinylbenzene polymer spheres that are uniform in size and density. The standards are reusable and stable with a long shelf life. Logging – The HI93102 allows users to log up to 25 measurement readings. Measurement logs can easily be recalled with the press of a button and a reminder will appear if the memory becomes full. The logging mode can be enabled or disabled. GLP – With a press of the “GLP” button on the face of the meter, users can view the date, time, and two calibration values of the current mode. Auto-shut Off - Automatic shut off is selectable after 10, 20, 30, 40, 50, or 60 minutes of non-use when the meter is in measurement mode. This feature prevents wastage of batteries in the event the meter is accidentally left on. Battery Status Indicator -  The status of the battery is monitored during every measurement cycle. An indicator will warn the user when the amount of battery life left is not sufficient to take reliable measurements. Error Codes – Helpful diagnostic codes appear on the display alerting to problems including low light, high light, or sample out of range.

• Color: Grey
• Display Type: Digital
• Weight: 3 KG
• Weight: SI/DPA
• Usage/Application: Industrial
• I Deal In: New Only
• Features: Handy single phase table top device, LED display
• Auxiliary supply: 230V, 50Hz
• Potential circuit: 110 / 440V AC.
• Current circuit: 1A / 5Amps AC
• Range: Overall size
• 300 x 100 x 150 mm: 3 Kg

• Warranty: 3 months
• Item Code: SME-DMM101B
• Model Name/Number: MECO 101B+
• Digit Display: 4 Digit
• Features: Pocket Size Equivalent to Fluke 101
• Model No.: 101B+
• Usage/Application: suitable for Service engineers
• AC Voltage: 0-750VAC
• Operating Temperature: 0-40 Deg C
• DC Voltage Accuracy: 0.5%
• Battery: 1.5V AAA Battery
• Safety Rating: CAT III 600V
• Resistance Range: 0-40 Mega Ohms
• Dimension: 130X65X32mm
• Brand: Meco
•  :  

Digital Gauss Meter, electric flux meter

• Country of Origin: Made in India
• Voltage: 24V DC, 230V AC
• Frequency: 50 Hz
• Temp Compensation: NTC10K or PT1000
• Temperature Range: 0-100 Degree Celsius
• Range: 0-14 PH
• Accuracy: 0.02 PH
• Size of Sceen: 2.4 inch
• Current Output: 4-20mA
• Control Type: High Limit
• Brand: RR Electronics
• Pole Type: Single Pole
• Usage/Application: Water Analysis

pH METER DIGITAL, Sensor & Temperature Controllers

pH Meter, Deep Freezer, Fume Hoods, Glassware Drier, vaccum pumps