Dresser Drawer Dealers in Chennai

On most Dia-form machines two dressers are setup for use in tandem and both can be replaced or interchanged easily and quickly. Mounted adjacent to each other either the roughing and semi-finishing and finishing tools can be setup together. Both dressers are inclined at an angle of 5 degrees to the wheel centerline at the point of contact, providing the optimum cutting conditions. Various angles and radii are available on these forming tools. Our latest technology and optics allow us to manufacture very specific radii and angles on these form diamonds. If a customer has other specific dimensions not listed simply send a sketch. Although Dia-form dressers were designed for the Dia-form machine many operators use the mono variety of machines.

• Features: Abrasion resistant, Fine quality, Less maintenance

600(W) × 585(D) × 2100(H) 600(W) × 585(D) × 2400(H)

Single point "bruited diamond" dressers are made with selected "Congo Rounds" mounted in a matrix. A Single cutting edge is presented to the grinding wheel. Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality depends on the grinding finish required and the machines and working parameters. We are one of the prime manufacturer and supplier of a wide range of Single Point Diamond Dressers that is manufactured from high grade diamonds depending on their structural strength, finishing and degrees of sharpness. These diamonds are mounted in a metal bond with one cutting edge rendered to grinding wheel. We manufacture superior quality assorted Single Point Tools. It is well known that rotating the single point dresser is important to maintain a sharp point, to reduce the wear and tear, and minimize its thermal buildup. For years this process means the drills will routinely loose setscrews, re-indicating the shaft from 20° to 40° with uneven wear and tear as the rotation varies with each machine operator.   Advantages   Longer tool life - ease in usage encourages more frequent rotation, producing more even wear and longer life.   Sturdier design - it withstands 2 to 3 times more torque than other single point dressers, and eliminates excess vibration and chatter.   Brass head reduces heat buildup - diamond tools have increased life over conventional steel tools. In the last few decades, single point diamond dressers have, undoubtedly, emerged as the most widely used diamond dressing tools. The prime reason for the popularity of these tools is the versatility offered by them, as they can be used for truing as well as dressing of grinding wheels.   BRUTED DIAMONDS       'A', 'B', 'C': These Stones are Bruted Type Commercial Quality diamonds.   'AA' Class: These Stones are natural polished stones.   'AAA' Class: These are premium grade Gem quality natural diamonds with 2-3 workable points.   Application The diamond point should contact the grinding wheel slightly below its center and at an inclination of 10-15�.   In feed increments of up to approx. 0.01-0.03 mm per dressing operation are possible.   Shock-like cooling may destroy the diamond.   Carefully place the diamond on the grinding wheel.

PetRa proudly presents its range of Diamond Dressers, which are made for customized and standard requirements. Our dressers are supplied for use in the Automotive, Bearing and Steel Industries. We are able to provide exacting solutions for dressing on various grinding machines including, Landis, Naxos, Modler, Junker, Pomini, Toshiba and many more. Customized solutions for dressing can be provided in consultation with our clients based on CAD diagrams. Our Dressers are made under strict quality control and latest manufacturing techniques in Europe and USA.

The Dragoon contains specially selected long stones, which are interlocked in layers, in a powder metal blade. This type of setting allows the tools to be fully consumed in use, no servicing is required. This is an important factor on automated and high production grinding machines. These tools are being used on a large number of centreless, cylindrical and surface grinding machines where accuracy of form and finish are important and in certain cases, the Dragoon has surpassed the more expensive polished chisel type for profiling work.

• Features: User friendly , Compact size, Accurate dimension
• Rough: 0.15 to 0.3 mm / rev.
• Finish: 0.10 to 0.2 mm / rev.

• Feature: Good strength, Rigid design , Premium quality.

• Features: Perfect shape, Compact size, Defect free

• Material: Stainless Steel
• Color: Silver
• Brand Name: Win Win
• Packaging Type: Carton Box
• Head Shape: Round

• Features: Abrasion resistant, Fine quality, Less maintenance

•  protect vinyl surfaces of your car: Restores and gives long lasting protection to vinyl surfaces.,Acts as a restorer as well as a sealant,Can be used on any color of Vinyl or Plastic
• Quantity :  1000 ml .
• Directions for Use: Shake the can well before use,Apply the product evenly to clean and dry vinyl components with a soft sponge,Ensure that excess material is not applied which may form streaks

• Features: High efficiency, Optimal performance, Quality product.

Diamond Dresser, Glass Grinding Wheel, CNC Machine Tools, Sharp Point Tools

Blade Type Diamond Dresser, Diamond Needle Files, Diamond Squaring Wheel

Diamond Dresser, Diamond Honing Stick, Diamond Grinding Wheel

Rotary Dresser, LCD Measuring Microscope, polishing bar, mandrel

Diamond Dresser, Diamond Honing Stick, Diamond wheels, Lapping Paste

window channel dresser, Car Care Products, car dashboard polish spray

Diamond Dresser, Polycrystalline Diamond, polycrystalline cubic boron nitride