Dural Trims and Profiles Pvt. Ltd. Perungudi, Chennai, Tamil Nadu

Rigid panel profile-inter locked with Aluminium for horizontal application along the walls, stairways. Prevents greasing of the walls, protects tile/wall surfaces from kerbing damages, keeping them spic & span. Act as a wall protector and support guard Ideally suitable for the reception counter, waiting hall of hospitals etc and along the horizontal wall side of long corridors acting as a wall protector and support guard

An easy transition profile made out of Aluminium designed to allow the pedestrians to walk through the passage with different floor level with ease.

This product is made out of PVC (Poly Vinyl Chloride) used wherever two tiles meet on an external corner such as a rib on wall and bath steps also enhancing the skirting while provide on top, Totally eliminate the chamfering procedure and saves the manpower. Available in sizes compatible with tile thickness – 7mm,9.5mm,10.5mm,11.5mm.

Tile spacers are small pieces polypropylene used to ensure consistent width of the grout joints and holds the tile securely in a place for quick and accurate installation. Avoids propagation of cracks developed to the adjacent tile. Tile spacers more specifically creating the perfect alignment in the floors giving an impeccable straight line finish that adds tons of value on to the aesthetics of the room.

Anti-skid nosing profiles used at the heel& toe corners of steps (Tiled, Marbled, Granite, etc) Surfaces like marbles, granites because of their inherent smoothness & gloss finishes tend to be slippery more so in wet conditions and in areas under regular mopping posing severe threat to an accidental fall. The self grooved Neoprene step not only protects from breakages but also promotes excellent gripping, skid resistant properties. Step

The new generation ready to use existing step made of Aluminium base and p.v.c.insert architecturally designed. Recommended for usage on an already damaged step of Vitrified, Marble, Granite floored step. The provision of rib on either side facilitates proper seating of the inserts, which act as shock absorber & gives perfect cushioning. On fixation these profiles not only covers the damaged portion but also prevents extension of the break or any new cracks.

Heavy duty corner profiles are not only enriches the ambience & aesthetics but also is a clear and concrete solution for the high damage prone zones like reception area, lobby, lift entrances, pillars, car stations, main gates, stairways at all. Stainless steel gard is available in matt & glossy finish.. to Protect the corners due to the heavy accidental impacts from movements of trolley, stretchers or in any other form keeping the corners absolutely break free & gleaming, not to forget the durability factor. The stainless steel guard utmost giving better performance, durability, minimal maintenance & aesthetics in building and construction fulfill these requirements splendidly.

Perfect bordering profile made of anodizing/powder coating aluminium the absolute finish and right substitute for ceramic border tile (pencil tile).Improves aesthetics and giving perfect bordering finish to the tiling area.

Heavy duty parking corner protection profile made out of specially designed Aluminium extruded section and covered with EPDM Rubber as the covering material over the Aluminium section

This product is made out of PVC (Poly Vinyl Chloride) used wherever two tiles meet on an external corner such as a rib on wall and bath steps also enhancing the skirting while provide on top, Totally eliminate the chamfering procedure and saves the manpower. Available in sizes compatible with tile thickness – 7mm,9.5mm,10.5mm,11.5mm.

This product is made out of PVC (Poly Vinyl Chloride) used wherever two tiles meet on an external corner such as a rib on wall and bath steps also enhancing the skirting while provide on top, Totally eliminate the chamfering procedure and saves the manpower. Available in sizes compatible with tile thickness – 7mm,9.5mm,10.5mm,11.5mm.

“L” shaped profile in both PVC is ideally suited for application on floors with tiles marbonite. Floor separator facilitates perfect alignment, setting right offset in sizes of tiles. Also can be used to protect tile outer corners and gives the corner a perfect line.

Existing corner guard in PVC compatible for plastered and tiled walls used in vertical applications. Sizes available as 25x25mm and 40x40mm. Prevents further propogation of damaged areas.

Inner corner protection profile for inside corners of vertical and horizontal wall& floor surfaces acting as Armour for the inner corners from getting attacked with moss porous formation. Prevents staining of the walls, is acid resistant& limits the usage of grouts & other fillers. These profiles are highly useful in areas where liquid flow is more, preventing staining of the floor area particularly in the operation theatre’s, high tech kitchen’s, highly hygiene oriented areas like testing rooms of pharmaceutical companies, research & development laboratories, etc.

The plaster bead used to protect and give a formal shape for gypsum plaster having a plaster depth of 4mm and having a flange width of 30mm .It gives plaster to right alignment and protects the wall plastered corners against damage caused by mechanical stress and impact during and after the construction phase.

Heavy duty parking corner protection profile made out of specially designed Aluminium extruded section and covered with EPDM Rubber as the covering material over the Aluminium section

The coving profile made out of quality PVC used at the acute inner corner ( floor to wall, wall to wall) acting as the armor for the inner corners from getting attacked with moss/porous formation and prevents the corner from staining. These profiles are highly useful in areas where liquid flow is more will create the possibility of seepage.

“L” shaped profile in both PVC is ideally suited for application on floors with tiles / marbonite. Floor separator facilitates perfect alignment, setting right offset in sizes of tiles. Also can be used to protect tile outer corners and gives the corner a perfect line.

The all new alignment profile meant to answer all the woes concerning mismatch of marbonite/marble/mosaic laying. Dividers made of rigid PVC available in grey colour this has the definite answer to a even & well aligned floor giving them their breathing space and aesthetic looks. A divider gives a straight- line finish to the floor surface and lessens the usage of excessive grouts. Also permitting for creating custom made designs on the floor area in the form of penciled lines or a checkered floor giving a new dimension to architectural values.

  ‘F’ Profile (PVC) The trend setter profile for ideal fixing in lengthy plastered area, profile resembles ‘F’ with trail punches on the extended face that neatly get embedded into the plastered area. Lengthy areas like long corridors, exterior plastering in high rise buildings, auditorium walls tend to develop cracks along the vertical and horizontal sides because of the prevailing extreme tropical weather conditions. The profile act as a breaker in the lengthy areas of plastered walls allowing maximum breathing of walls& keeps retention of heat under control.

The clear substitute for conventional methods to arresting the expansion & movements of high rise & lengthy buildings. Expansion movement joints are made of rigid aluminium casing on the outer with interlocking mechanism embedded with flexible Neoprene insertions that act against angular movements like expansion & contraction associated with climatic changes. Neoprene is a synthetic rubber based component added with natural rubber so as to provide its inherent properties of absolving & controlling expansion movements within permissible levels. available in Black and Grey shades. Expansion joint, The sizes are available and designed as per the structural requirement are in 10x25,15x25, 20x25, and 50x50mm sizes and standard design profiles are sizes, 25x25,25x50 others upon request in bulk quantities.(Black/Grey) We undertake all type of expansion joint treatments with equivalent product matching with the properties.

The cover blocks made out of poly propylene material at the recommended sizes as per the building standards and it is necessary to provide an effective cover to the reinforcement to ensure the alignment of reinforcement in structural column or beams.

Inner corner protection profile for inside corners of vertical and horizontal wall& floor surfaces acting as Armour for the inner corners from getting attacked with moss/ porous formation. Prevents staining of the walls, is acid resistant& limits the usage of grouts & other fillers. These profiles are highly useful in areas where liquid flow is more, preventing staining of the floor area particularly in the operation theatre’s, high tech kitchen’s, highly hygiene oriented areas like testing rooms of pharmaceutical companies, research & development laboratories, etc.

Rigid PU profile press mounted type on aluminium base plugged on to damaged area of tile marblegranite. The accidental heavy impacts result in a portion of the surface getting distorted and affected area falls off giving a hollow look to the corners. This leads to either continuing with the breakage, or calls for replacing the damaged portion alone, which in the end will actually result in the renovation of the entire place adding additional expenses & consumption of time. Also this profile forms the role & is the ultimate solution for already damaged corners.