Electrical Components Dealers in Ambattur, Chennai

Load Bank is used to test and evaluate performance of Generators and UPS periodically, under various load conditions like full load/Inductive load/ sudden loads and Overload. Sometimes, it is used as Dummy Load for the generator to avoid Glazing of Pistons while running on very low load conditions. Technical specification : Range : Up to 12 MW Degree of protection : IP 21 / 33 Service : Indoor / Outdoor Enclosure Finishing : Epoxy powder coat painted / Galvanized Mounting type : Stationary / Wheel Mounting / Trolley or Trailer Mounted / Container housing Voltage : 24 V to 1500 V DC / 24 V to 33 kV for AC – 1Ph and 3 Ph Frequency : 50 / 60 / 400 Hz Standard followed : BS587 Power Factor : Resistor / Resistor – Reactive, Unity / 0.4 PF / 0.8 PF Control : Local / Remote, Contactor Switching Selection of Loads : Through Push Buttons or PLC / By hand held stations or By Laptop Meters : Recording by Laptop / Multifunction Digital meter to indicate PF/V/I/KW/KVAR/Hour Ventilation : Natural / Fan cooled – Vertical / Horizontal

• Diameter: 10 mm
• Length: 450 mm
• Color: Silver
• Pieces Per Box: 10

• Size: Standard
• Type: Generator Spare Parts
• Brand Name: Delcot
• Material: Brass
• Certification: ISO Certified
• Application: Generator Use
• Weight: 1-5kg
• Color: Yellow
• Surface Finishing: Polished
• Warranty: NA
• Country of Origin: India
• OE No.: NA
• Rated Voltage: NA
• Rated Current: NA
• Output Type: NA
• Rated Power: NA

Anti wear alloy electrodes A highly low amp anti-wear electrode for overlaying, cushioning and building up low, medium carbon, low alloy and Hadfield steels. Newly formulated heavy coated high recovery electrode. Designed for extreme abrasion And mild impact conditions. The electrode has smooth running characteristics. A low heat input “Anti-wear” iron-base alloy electrode for abrasion-resistant overlays on plain carbon and Hadfield manganese steels and Grey Cast irons.

• Application: Welding Purpose
• Length: 0-250mm
• Feature: Proper Working, Temperature Maintained

• Size: Different size available
• Feature: Easy maintenance

Earthing Electrode mild steel copper bonded maintenance free earthing.Manufactured in compliance with the existing industry guidelines, these high functionality earthing rods are easy to install and required low maintenance.

Our clients can avail from us an excellent range of S. S. Welding Rods, which is procured from some of the industry leading vendors. These rods are manufactured using high-end technologies and quality raw material to ensure the international quality standards of our range. Our S. S. Welding Rods are finding application in fabrication, construction and welding industry Specifications Great Strength Low coefficient of friction Resistance against solvents High wear resistance Excellent workability

Collecting Electrode, Heating Elements, Outer Arm Electrostatic Precipitator

• Material: Copper
• Voltage: 110 V - 250 V
• Usage/Application: Induction Heater
• Brand: BRG
• Frequency: 10 kHz-50 KHz

Sacrificial Anode DESCRIPTION : • Ideal for protection against corrosion.• Composed of an alloy of Magnesium, Aluminum and Zinc.• Potential of 1,55 volts in relation to the Cu/CuSO4 electrode.

rising mains, Bus Ducts, Electrical Panel Board, Electrical Products

Electrical Components, marine spares, Mechanical Components

Welding Electrodes

Mild Steel Welding Electrodes, Welding Accessories, Welding Electrodes

Earth Clamps, Dust Mask, Ear Muffs, Gloves, Nose Mask, Safety Glasses

Electrode

Ferrite Core, coil winding products, Emergency Lamp

Ground Rod Clamp, earthing electrode, Manhole Covers, Earthing Powder