Electrical Insulator Dealers in Chennai

• Color: White
• Material: Ceramic, Also Supplied with Bolts on Request.
• Brand Name: Powermech
• Country of Origin: Made in India
• Size: As per Customer's Requirement
• Usage/Application: EOT Crane, Hoist, Gantry Crane, Overhead Crane, Angle Iron Busbar, Foundry, Steel Mill, etc.

The company has firmly cemented its position as a Manufacturer and Supplier of Insulated Core End Terminals. The wide range of the Insulated Core End Terminals is available in varied dimensions and colors. Made using copper and other high quality raw materials, the Insulated Core End Terminals are safe and durable.

• PT Range: 33KV to 400 KV

Long-Rod Type Insulators: From 33 KV to 765 KV Range, Standards applicable IEC, ANSI, DIN, and is. Line-Post Insulators: From 33 KV to 66 KV Standards applicable IEC, ANSI, DIN, and IS. Railway Insulators: 25 KV, As per RDSO Specification Station Post Insulators: From 33 KV to 765 KV Range, Standards applicable IEC, ANSI, DIN, and IS. Hollow Insulators: For SF-6 Circuit-Breaker, Bushings, Arresters, Cable Terminations, CT, CVT, PT Range 33KV to 400 KV Maximum dia 650mm, height 2500mm in single piece.

• Type: Polymer Insulators
• Material: Polymer
• Certification: ISI Certified
• Condition: New

We VOLTSY TECH providing Composite Silicone Polymeric Insulator to comply with IEC 61109, C29-11-1989 and international standard with latest amendment Composite insulators were introduced when time demand to require a better technology then ceramic or glass insulator. VOLTSY TECH providing Composite Silicone Polymeric Insulator with different combination of high quality silicone materials and it end fitting made of metal, such as forged steel or SG Iron casting. We are using ECR glass fiber reinforced resin rod which forms the core of the insulator is responsible for bearing the mechanical loads and ECR is providing Environment protection. The insulator type is depending on its requirement like tension, suspension or bending. Polymeric insulator are two type Disc and Line Post Insulator which divide in further various categories. Polymeric Insulator advancements in technology the usage of composite insulators has grown to prevent line flash-over triggered by pollution. Features High quality silicone rubber provide Hydrophobicity Easy to install and reduced breakage Less in weight, economical to transport and less labor require to handle. Excellent anti-pollution, performance is excellent in high polluted area High Mechanical strength Superior anti-tracking properties.

• Type: Terminal Insulators
• Material: PVC,Rubber,Plastic,Brass
• Condition: New,Used
• Finishing: Polished,Non-polished
• Color: Red,Blue,Black,White,Off-white,Creamy
• Appliction: Industrial
• Features: Perfect finish,Optimum strength,Sturdy design,Rugged construction ,Seamless finish

• Material: HDPE
• Features: Easy to install , Durable finish ,Thermal stability
• Size: 3 to 8 feet depending on the size of the pipe
• Usage/Application: Industrial
• Features: Easy to install , Durable finish , Thermal stability

The Pre Insulated Terminals are made of the best quality material and hence durable to the highest extent. Made of optimum quality copper the Pre Insulated Copper Terminals are widely used in different electrical uses. Among the Suppliers of PreInsulated Terminals, our name is pronounced with respect for consistently supplying the best quality products.

A Bond - Strands Pvt. Ltd., is in the field of manufacture of various cast epoxy resin components for more than two decades. Our facility has a full component of equipment for casting under high vacuum and using pressure gellation technique to produce void free epoxy castings of high quality to suit very critical high voltage applications. Light weight and less bulky • Leak proof Encapsulation of metal conductors • Ideal substitute for porcelain in indoor applications • Adequate electrical clearances & creepage distance provided for. • Conductor of aluminum brass copper silver plated wherever necessary.

• Voltage: 220 V
• Brand Name: Raychem
• Material: Stainless Steel
• Finishing: Galvanized
• power frequency: 765 kV
• Frequency: 50 Hz

• Application: Control Panels
• Condition: New
• Tensile Strength: 0-25Mpa, 125-150Mpa, 150-175Mpa, 175-200Mpa, 25-50Mpa
• Standard: DIN
• Feature: Easy To Install, Electrical Porcelain
• Warranty: 5years
• Puncture Voltage: 0-50Kw, 250-500Kw, 50-100Kw
• Voltage: 11 Kv
• Creepage Distance: 320 Mm
• Falling Load: 70 Kn

• Color: Red
• Brand Name: Jigo
• Country of Origin: Made in India
• Size: 1.0 x 8 mm
• Packaging Type: Box
• Model No: E1008

• Thickness: 2mm
• Color: Silver
• Material: Customize
• Country of Origin: Made in India
• Max Withstanding Temperature: Customize
• Size: >3 inch

• Features: Loop powered Location description detailing
• Operating voltage :: 17-27V DC
• Without Backbox :: 144g

This device is designed to prevent damage to the devices caused during the event of short circuit at sensor signal wire. At the time of short circuit, the isolator will disconnect the supply to the consecutive series of devices connected after isolator module in the loop. Short circuit isolators are placed between groups of sensors minimise the damage due to short circuit.

• Rated Current: 200 - 1250 A
• Rated Voltage: 11 - 33 KV
• Material: Porcelain
• Mounting Type: Horizontal
• Frequency: 50 - 60 Hz
• Ambient temperature: - 30 deg to 40 deg C

We focus on the voltage range of 12kv-400kv series composite insulators, also known as polymer insulators or silicone rubber insulators, which include suspension long rod  insulators, pin type insulators, station post polymer insulators, cross arm silicone rubber insulators, electrified railway polymer insulators, and so on.

• Feature: Excellence dielectric strength,Excellence dielectric strength
• Material: Epoxy Resin
• Voltage Rating: 660V to 36kV

• Output test AC current, mA, max: 130 (300)
• Supply voltage, V: 220 ± 22
• Frequency, Hz: 50 ± 1

Drum insulator, The insulators testing device HVTS-HP is designed for testing the insulation of power cables and solid dielectric with the rectified voltage of up to 100 kV, as well as testing solid dielectrics with the sinusoidal voltage of up to 100 kV, 50 Hz.

• Feature: Excellent Finish, Highly Durable
• Puncture Voltage: 0-50Kw
• Rated Voltage: 10kV
• Driven Type: Electric
• Voltage: 110
• OEM: YES
• Volume Range: 000 m3/hr

Details 36 KV to 400KV Long Rod Silicon Rubber Suspension and Tension Insulators Bus Post Insulators up to 220kV Porcelain Insulators up to 220kV Toughened Glass Disc Insulators

• Voltage: 220 V
• Finishing: Galvanized
• power frequency: 765 Kv
• Brand Name: Raychem
• Material: Stainless Steel
• Power Source: Electric

• Frequency: 50Hz
• Model No: MV V12 OI
• Rated Voltage & Rated Current: 12kV, 630A Up to 2000A
• Insulation Level: 28kV / 75kV Peak
• Breaker Standard: IS 9920

• Features: Reliable to use,High performance,Sturdy construction

We are well known for supplying of wide variety of FR Grade Insulators.

Composite Silicone Rubber Insulators, high voltage porcelain insulators

electronic ceramic insulator, regulators, Ceramic Insulators, id torch

high voltage insulator, Surge Arresters, coupling capacitors

thermal insulators, ventilation equipment, ridge ventilator

Porcelain Insulator, Polymer Insulators

ESP Insulators, Dry Electrostatic Precipitator, Poppet Valve

Contact Insulators, Vacuum Circuit Breakers, Drive Insulator 11kv

bus bar insulators, Nylon Bearing Roller, Sticker, welding studs