Electronic Test Instruments Dealers in A Nagar, Chennai

8-Channel Broadcast Monitor The COMM-connect 3024 Broadcast Power Monitor can control up to 8 external RF Measuring heads. The high dynamic range with external couplers and RF measuring heads cover from 1W to 1MW. The Power conversion algorithms handles multi carrier, multi mode, peak, average and RMS signals. The power readout is auto scaled and VSWR can be calculated between any probes. Also the measured and calculated results along with alarms can be shown in the local LCD. The instrument has SNMP support to allow network management. The instrument can be configured for VSWR and Power limits to give alarms. The alarms can be configured to operate relay drivers or isolated Optcouplers. The alarms can also be configured as SNMP traps sending relevant information to the network control center or sending an e-mail. All values are logged and time stamped to a USB stick every minute. The COMM-connect 3024 WEB enabled Power Monitor gives an unlimited number of application to monitor and control the last part of your RF network installation from transmitters to the antenna. Specifications:  · Frequency range:    · 3015 Probe: 470 - 860MHz    · 3016 Probe: 50 - 250MHz    · 3026 Probe: 10 - 2500MHz    · 3020 DDC: depends on variant · Temperature range: 0C to +50C · Power Supply: 85-264VAC, 50/60Hz Applications:  · Cost effective · Site monitoring · Remote site surveillance · Rack mount · Web administration · Wide selection of probes

• Type: Ph Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 3-6VDC, 6-9VDC
• Display Type: Digital
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance

We are the main supplier of this product.

• Accuracy: ±0.01 ph, 1 mv,±1 digit
• Power Supply: 230V ± 10% Hz
• Led Display: 31/2 digits 0 to 14 PH, 0 to ±2000 mv.
• Compensation: 0 to 100°C (Manual)
• Product Code: ELSHADDAI CVL - 018

• Resolution: 10 PPM
• Application: Laboratory
• Display Type: Digital
• Material: Plastic
• Button Type: Key Touch
• Item Code: TDS-3

Being one of the largest companies, we are engaged in offering a wide range of Roto Meters to meet the demands of our clients. Our products are rigorously monitored by the quality detectors and are authenticated as per the international standards. These products are well equipped and ensure long lasting service life. Features: Accurate High performance Long lasting

• Features: . Portable and Light weight. User Friendly,LCD Display
• Magnetic Field: Loudspeaker,Dynamos,Moving Coil Instruments

• Type: Capacitance Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Application: Indsustrial Usage, Power Monitor
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years

We provide a wide variety of data loggers ranging from general purpose to data loggers designed for specific needs. Our data loggers comply to the required standards for reliability and accuracy for an extended period of time. They therefore require minimal human involvement, and thus our data loggers are ideal for deployment in locations which are difficult to access. Application Sea Foods & Milk Industries Testing and calibration laboratories Automobile and Heat Treatment industries Pharmaceutical and Chemical industries

Accept input RTD, Thermocouple, Voltage , Current Process - Temperature , Pressure, Humidity ,Level Flow,Co2, Air velocity, Diff pressure etc . Optional for with and with out Display Also available single pen and Dual Pen Operating Voltage 110 VAC or 230 VAC Chart speed 8 24168 hours ( shift DailyWeekly) Chart Size 150mm or 300 mm , pen red and blue External power supply for transmitter optional Cutout size : 225X225mm(150mm) & 372X417 mm

The portable analog shore hardness testers are the most accurate and repeatable hardness testers available in the market. The R&D has helped in reducing the frictional force during the penetration of the indenter during the actual testing.The Spring used in the hardness tester has a very long fatigue life and the accuracy of the machine is maintained for a very long time with very less maintenance. The machine is ideally suited for checking the hardness of rubber and polymer components in the production line and the quality control laboratory. The machine can be supplied with a test stand, maximum indication pointer, pressure force limiting fixture etc. It is a very handy portable machine.

User Friendly Cost Effective | Field ProgrammableMeasure, Monitor and Control Basic, Power & Energy. Upto 2 relays. BenefitsCost effective, user friendly load manager - can be integrated with EMS. Technology Advanced circuitry for accurate measurements, multiple communication option wired or Wireless. ApplicationsFor monitoring electrical parameters, Control / protection.  

• Range: 200 to 2, 00, 000 lux
• Product Code: SAMS NDT - 001

Up to 16 CWDM channels * Save and download data * Broadband power-meter feature * Bar graph, plus table of results * Fastest and smallest CWDM tester on the market

3Ø Energy Meter 3-phase panel mount (96 x 96) can measure KW,KVA, V,I,pF F for three phase applications with external CT and PT provision, RS485 output.

We offer Thermal Conductivity Apparatus. Thermal Conductivity Apparatus BSPIL-HTR-09010 This apparatus consists of the test section assembly, consisting of the asbestos specimen, heater as well as thermocouples are available to measure temperatures on the specimens and there water inlet and outlet. Provision is also made to measure the cooling water flow rate. The whole assembly is enclosed in an insulating layer of mineral wool to prevent radiation and convective losses to the maximum extent possible

Purchasers can place wholesale or retail orders with any time of the year and expect timely arrival of deliveries. Buy the best quality Lcr Meter at rock-bottom prices from us. We are a reckoned name in the town

• Brand Name: PICO Technology
• Usage/Application: Research
• Channels: Dual
• Frequency Controller: low to very high frequency
• Dimension: 9.7 x 7.6 x 2.5 inches

Wirelessly measure both conductivity and dissolved solids. Highly accurate with a fast response time and featuring built-in temperature compensation. The Wireless Conductivity Sensor measures the electrical conductivity of a water solution. Investigate the properties of solutions, perform conductometric titrations, model and measure water quality and more.     Typical Applications Conductivity (the ability of a liquid to conduct electrical current) is one of the most common measurements in biological, chemical and environmental studies. This sensor measures the total concentration of ions in solution. Water quality investigations Studying the effects of pollution on water Measuring Total Dissolved Solids (TDS) Investigating solution properties Performing condumetric titrations Diffusion of ions through membranes Special Features Simplicity: just pair and go, no cables and adapters to manage Variable sampling rate for capturing small fast changes or experiments that run for hours, days, or weeks. Features convenient Bluetooth wireless connectivity and long-lasting coin cell battery Logs conductivity data directly onto the sensor for long-term experiments. Dust, dirt and sand proof and water resistant (1 meter for 30 minutes) Bluetooth 4 Connectivity Required Software: PASCO products that use Bluetooth® 4 technology – wireless sensors, smart carts, and the AirLink Interface – require the latest versions of our software. PASCO Capstone 1.9.1 is available for Mac and Windows. SPARKvue 2.7.0 is available for Mac, Windows, iOS, Android and Chromebooks. Compatibility/System requirements Any current model Mac, iPad, iPhone, Android tablet or Android phone will support direct connection to PASCO Bluetooth 4 devices. Windows computers/tablets, Chromebooks and older Macs currently require the PS-3500 USB Bluetooth 4.0 Adapter to connect to PASCO’s Bluetooth 4 devices. Full compatibility details are available, including compatibility information for older computing devices. Datalogging Independent datalogging Long term data collection directly on the sensor In logging mode wireless sensors collect data to their onboard memory for hours, days, weeks or even months at a time without needing to be connected to a computer, tablet, Chromebook or smartphone. When the experiment is concluded, simply connect the sensor to a device running PASCO software and download all the measurements it recorded.

Easy Solutions can provide you solutions to your temperature/humidity recording requirements, be it stand-alone or real-time. Our loggers have been used successfully in monitoring temperature fluctuations in industrial manufacturing units, pharmaceutical and food sectors, lab facilities and even during transportation and storage of products in temperature controlled environments. We provide a varied assortment of loggers to suit your needs

Graduated scale enables easy visual check of flow rate regardless of operator. Built in flow rate adjustment valve enables desired setting of mold conditions for each machine. Easy resumption of previously set molding conditions to cut lead times. T2 side is equipped with rotary functions. Even after flexing the body on T1 side to the piping. additional screw tightening on T2 side is possible. Maintenance is extremely simple.

The pen and chart movement in our recorders are driven by stepper motors, which further enhances the reliability by removing the need for any potentiometric or mechanical feedback system. With a software based mechanical calibration for pen alignment, our recorders are user-friendly, letting you perform mechanical and electronic calibration from the front panel keyboard itself.

• Weight: 49g
• FEATURES: Push button for POI recording, High receiving sensitivity, Smart log of time, distance and speed,
• APPLICATIONS: Record your travels, Manage business trip expenses, Geo-photo
• Dimension: 93.5 x 46 x 10.8 mm

• Warranty: 3 Year
• Brand: Fluke
• Digit Display: 3 Digit
• DC Voltage Accuracy: 0.01 %
• Model Name/Number: 107
• AC Voltage: 600V

• Display Type: :
• Sensor Type: :
• Large area Ge Photo detector: Calibrated Wavelength
• :: 850nm, 1310nm, 1550nm (switch selectable)
• Optical Input Wavelength: :
• 800 – 1550nm: Optical Input Power
• :: +3dBm to -60dBm
• 3½ Digit LCD: Accuracy
• :: + 0.2dB
• Resolution: :
• 0.1dB: Operation
• :: 9V Battery or 9V wall mount adaptor
• Optical Interface Connectors: :

Digital Panel Meter, MICRO CONTROLLER BASED KITS

• Country of Origin: India
• Type: Phase Meters
• Material: Aluminium
• Shape: Circular, Rectangular, Round

Elixir make Lab pH meter is a reliable meter to determine the actual pH of sample solution. High input impedance of the circuitry ensures accurate reading. The meter is compatible to all types of pH electrodes with electrical...

mixed signal oscilloscope, analog oscilloscopes, Digital Storage Oscilloscopes