Electronic Test Instruments Dealers in Guindy, Chennai

8-Channel Broadcast Monitor The COMM-connect 3024 Broadcast Power Monitor can control up to 8 external RF Measuring heads. The high dynamic range with external couplers and RF measuring heads cover from 1W to 1MW. The Power conversion algorithms handles multi carrier, multi mode, peak, average and RMS signals. The power readout is auto scaled and VSWR can be calculated between any probes. Also the measured and calculated results along with alarms can be shown in the local LCD. The instrument has SNMP support to allow network management. The instrument can be configured for VSWR and Power limits to give alarms. The alarms can be configured to operate relay drivers or isolated Optcouplers. The alarms can also be configured as SNMP traps sending relevant information to the network control center or sending an e-mail. All values are logged and time stamped to a USB stick every minute. The COMM-connect 3024 WEB enabled Power Monitor gives an unlimited number of application to monitor and control the last part of your RF network installation from transmitters to the antenna. Specifications:  · Frequency range:    · 3015 Probe: 470 - 860MHz    · 3016 Probe: 50 - 250MHz    · 3026 Probe: 10 - 2500MHz    · 3020 DDC: depends on variant · Temperature range: 0C to +50C · Power Supply: 85-264VAC, 50/60Hz Applications:  · Cost effective · Site monitoring · Remote site surveillance · Rack mount · Web administration · Wide selection of probes

The portable analog shore hardness testers are the most accurate and repeatable hardness testers available in the market. The R&D has helped in reducing the frictional force during the penetration of the indenter during the actual testing.The Spring used in the hardness tester has a very long fatigue life and the accuracy of the machine is maintained for a very long time with very less maintenance. The machine is ideally suited for checking the hardness of rubber and polymer components in the production line and the quality control laboratory. The machine can be supplied with a test stand, maximum indication pointer, pressure force limiting fixture etc. It is a very handy portable machine.

HIGH PROFILE MULTIFUNCTION METERPOWER NAVIGATOR | eNAVIGATOR I NAVIGATOR PLUS Measure, Monitor and Control Basic, Power, Energy, Harmonics, Kfactor and Unbalance. BenefitsMultiple options like DemandImport Export / Harmonics. Digital or Analog Input or Output. Technology Advanced Circuitry for accurate measurements.   Applications Demand Control, Import Export, Harmonics Measurement & Transformer Efficiency.

• Accuracy: ±0.01 ph, 1 mv,±1 digit
• Power Supply: 230V ± 10% Hz
• Led Display: 31/2 digits 0 to 14 PH, 0 to ±2000 mv.
• Compensation: 0 to 100°C (Manual)
• Product Code: ELSHADDAI CVL - 018

• Country of Origin: China
• Certification: CE Certified
• Warranty: 1yr

Battery Power backup Room Quality Sensor transmitter, which can detect temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S.   Note: You can add or remove any parameters   Parameters   Power supply: DC 10-30V Maximum power consumption: 0.6W (24V DC power supply) Detection parameter: temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S. Working environment: -10℃-55℃, 0~95%RH Signal output: WIFI or RS485 Product material: ABS Installation method: wall-mounted, ceiling-mounted   Datasheet - Air Quality Detector Detection parameters Range Resolution Accuracy Preheat time PM2.5 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min PM10 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min Temperature -40℃~+120℃ 0.1℃ ±0.5℃(25℃) — Humidity 0%RH-100%RH 0.1%RH ±3%RH (60%RH, 25℃) — Atmospheric pressure 0~120Kpa 0.1Kpa ±0.15Kpa@25℃101Kpa — Illumination 0~200000Lux 1Lux ±7%(25℃) — TVOC 0~60000ppb 1ppb 8%FS(@C2H6O,0.5ppm,25℃,50%RH) — Carbon dioxide 0~5000ppm 1ppm ±(50ppm+ 3%F·S) 2min O2 0~25%Vol 0.1%Vol ±2%FS ≥5 minutes H2S 0~100ppm 1ppm ±2ppm or ±10% ≥5 minutes H2 0~1000ppm 1ppm ±5%FS ≥5 minutes

• Brand Name: Embsys
• Warranty: 1yrs
• Country of Origin: China
• Frequency: 50Hz

  Our cost effective yet accurate and reliable strip chart temperature recorders are available in several most frequently usedtypes. The variety includes support for singe pen or multiple pens, with temperature probe or without it, support for Type J Thermocouple, and support for a wide range of temperature. DOWNLOAD CATALOGUE

• Range: 200 to 2, 00, 000 lux
• Product Code: SAMS NDT - 001

• Display Type: :
• Sensor Type: :
• Large area Ge Photo detector: Calibrated Wavelength
• :: 850nm, 1310nm, 1550nm (switch selectable)
• Optical Input Wavelength: :
• 800 – 1550nm: Optical Input Power
• :: +3dBm to -60dBm
• 3½ Digit LCD: Accuracy
• :: + 0.2dB
• Resolution: :
• 0.1dB: Operation
• :: 9V Battery or 9V wall mount adaptor
• Optical Interface Connectors: :

We offer Thermal Conductivity Apparatus. Thermal Conductivity Apparatus BSPIL-HTR-09010 This apparatus consists of the test section assembly, consisting of the asbestos specimen, heater as well as thermocouples are available to measure temperatures on the specimens and there water inlet and outlet. Provision is also made to measure the cooling water flow rate. The whole assembly is enclosed in an insulating layer of mineral wool to prevent radiation and convective losses to the maximum extent possible

Multicolor Ribbon , RedBlueGreen Pen And Strip chart ( Roll Z folder), Circular Chart ( weekly, Daily, Shift ) 168248 Hours Strip Chart size 100mm, 120mm, 180mm Circular chart size 150mm, 300mm Customized chart , Pen also available This Spares suitable for Tempsen, RR, sietex Recol, Honeywell, yakagowa, shinko, Chino recorders Ranges available -200 to 1200 % and °C,°F Option with circular strip Recorder

• Accuracy: +-2.0 %
• Brand Name: Accsys
• No. Of Channels: Max 12
• Measuring Range: -200 to 850 deg C
• Decimal Point Format: 1 Decimal
• Resolution: 0.1 deg C
• Dimension: 96x192x350 cm
• Relay Contact Rating: 230 V AC/DC, 5A
•  Display:  4 digit

The pen and chart movement in our recorders are driven by stepper motors, which further enhances the reliability by removing the need for any potentiometric or mechanical feedback system. With a software based mechanical calibration for pen alignment, our recorders are user-friendly, letting you perform mechanical and electronic calibration from the front panel keyboard itself.

multi function meter, ONLINE UPS, safety enclosures, Power Quality audit

Yokogawa PH-Conductivity-DO-ORP Sensors, Yokogawa Paperless Recorder

Data Loggers

Profile Projector Digital With Data Logger

mixed signal oscilloscope, analog oscilloscopes, Dc Regulated Power Supply

Digital Planimeter, Anemometer, Metal Pipes, metal tins, O Ring

power monitoring, Sales Force Management