Expansion Joints Dealers in Chennai

Axial bellows are thin walled cylindrical components. Their surface area features a corrugated structure which is perpendicular to the cylinder axis. Because of this corrugated structure the bellows are highly flexible during axial, lateral andor angular.

Based on the piping system at Customer End customized Rectangular Expansion Joints can be designed.It absorbs axial and lateral movements Based on the movements, single rectangular expansion joints and universal rectangular expansion joints can  be used.Corner type Single miter /double miter V profile and U profile are  normally used for convolution.

• Finishing: Polished
• Color: Silver
• Feature: Fine Finishing
• Technics: Non Casting
• Country of Origin: India

Bridge expansion joints are structural components designed to provide smooth passage over the gap between adjacent sides of a deck joint, while also permitting relative translation andor rotation of the two sides of a bridge deck (deck movement joint). A deck movement joint is generally defined as a structural discontinuity between two elements, at least one of which is a deck element, and is designed to allow relative translations and rotations due to: thermal expansion and contraction of the superstructure, concrete shrinkage or creep, elastic shortening due to pre-stressing, displacement of the structure under load, or any other action the desk is subjected to.

• Feature: Affordable prices, Timely delivery, Fine quality

Cori belongs to the IGP Group of Companies based in Chennai (Madras), India. Products range includes Rubber expansion joints, Anti vibration mounts, Rubber sheets, Rubber lining services for anti-corrosive application & Pulley lagging.   PERFORMANCEAND CONSTRUCTION FEATURES Test pressure upto 24 bar (upto 300NB) Cyclic movement test for 5000 cycles under design pressure conducted on sizes 1600NB, 2100NB and 2200NB bellows. Manufactured sizes upto 3600mm (144 inches)*. Safety factor built in upto4:1. Low spring rates. Greater movement per arch. Manufactured in single or multiple arches. Choice of eight liner elastomers Choice of cover to match liner materials or different materials for better resistance to external conditions. Filled or unfilled arches. Galvanised carbon steel or stainless steel split backup rings. Can be built with permanent offset to compensate for existing or designed piping misalignment

A prominent supplier of huge range of Rubber Expansion Joints.

Cori belongs to the IGP Group of Companies based in Chennai (Madras), India. Products range includes Rubber expansion joints, Anti vibration mounts, Rubber sheets, Rubber lining services for anti-corrosive application & Pulley lagging. PERFORMANCEAND CONSTRUCTION FEATURES Test pressure upto 24 bar (upto 300NB) Cyclic movement test for 5000 cycles under design pressure conducted on sizes 1600NB, 2100NB and 2200NB bellows. Manufactured sizes upto 3600mm (144 inches)*. Safety factor built in upto4:1. Low spring rates. Greater movement per arch. Manufactured in single or multiple arches. Choice of eight liner elastomers Choice of cover to match liner materials or different materials for better resistance to external conditions. Filled or unfilled arches. Galvanised carbon steel or stainless steel split backup rings. Can be built with permanent offset to compensate for existing or designed piping misalignment

• Size: 1 inch
• Shape: Round
• Brand Name: Ozone Engineering Solutions
• Country of Origin: Made in India
• Thread Size: Minimum 20 NB

Manufacturing and supply of various types of Expansion bellow with reinforcement or without reinforcement. Multi or single humps with metal or rubber flanged bellows. Round shape, square shaped bellows with back split galvanized M.S.Flanges. As well as we supplied hand laid hoses up to 600 dia with reinforcement and metal or rubber flanged withstand in vaccum and pressure condition.Molded bellows and extruded hoses also we are manufacturing and supply to many customers.

• Application: Gas Pipe
• Size: Customized
• Brand Name: NA
• Material: Standard
• Color: Natural
• Thread Size: Standard

Individually designed to meet the specific requirements of each application From a modest beginning in 1955, the IGP Group today provides over 20 products and services to the core sector. The group’s products are accepted both in the domestic as well as in the international markets.

We do DM Plant Rubber Lining company, We do rubber lining for DM plant.Anti Corrosion, Abrasion, long life.

We manufacture and export defect free range of Circular Bellows that are widely applicable in different industries. Some of the industries where our range of Circular bellows are widely used are power, petrochemical, steel, refining chemical and cement. Our range is widely used to screen important machine components to avoid wear and tear due to unwanted foreign particles. Available in different shapes and sizes, we efficiently meet the varied requirements of the clients.

• Black: White

Non metallic expansion joints are very essential in process plants where hot air, hot gases and flue gases are involved in the proccess lines. The advantages of using this is 1. They do not transfer vibration to the ducting from the rorationg elements like fans, blowers, vibrating sieves, mills, etc,. 2. They are designed to accomodate elongation of the ducts due to temperature in all three directions. 3. They accomodate minor misalignments and plant settling without damaging the ducts. they can be used in applications within the temperature range of 40 to 1400 deg c and pressure range of +/- 2000mmwc. alta vista can supply non metallic expansion joints as complete assembled units (with steel frames) and only fabric rolls to suit the existing non metallic expansion joints in case of replacement. we have vast experience in identifying core problems in non metallic expansion joints / failure of non metallic expansion joints. we can also supervise and properly end join fabrics at site during shut down and ensure proper fixing of the same.

KELD offers a complete range of Rubber expansion joint. These joints are offered in various sizes & can be made as per your requirement. The entire range is available in different types such as single arch or multiple arches. These joints are fabricated of high tensile reinforced rubber. The range of rubber comprises neoprene, EPDM, butyl, Viton etc.

The Edge Welded (Diaphragm) bellows consists of two rings. These rings are edge welded together inside and outside. Edge welded bellows guarantee a very high flexibility. These bellows are used in measuring & control devices, mechanical seals for pumps, motors etc. BHASTRIK possess the capability to manufacture NESTING RIPPLE type edge welded bellows in stainless steel AM350 and exotic metals including Hastealloy C-276 and Inconel 600, 625 or 718, in sizes ranging from minimum of 12 mm I.D. to 175 mm O.D. The precision-formed diaphragms are edge welded by micro plasma or laser welding using special fixtures to prevent uneven stress build up. The thickness of diaphragms varies between 0.127mm and upward 0.30mm.

The clear substitute for conventional methods to arresting the expansion & movements of high rise & lengthy buildings. Expansion movement joints are made of rigid aluminium casing on the outer with interlocking mechanism embedded with flexible Neoprene insertions that act against angular movements like expansion & contraction associated with climatic changes. Neoprene is a synthetic rubber based component added with natural rubber so as to provide its inherent properties of absolving & controlling expansion movements within permissible levels. available in Black and Grey shades. Expansion joint, The sizes are available and designed as per the structural requirement are in 10x25,15x25, 20x25, and 50x50mm sizes and standard design profiles are sizes, 25x25,25x50 others upon request in bulk quantities.(Black/Grey) We undertake all type of expansion joint treatments with equivalent product matching with the properties.

• Color: Black and Grey
• Size: 25*25mm, 25*50mm,25*75mm
• Brand Name: Dural India
• Features: Rust Proof, Light in Weight
• Application/Usage: Construction
• Expansion Joint Type: Floor To Wall

• Size: Customised
• Color: Black
• Brand Name: Rajsen
• Pay Mode Terms: T/T (Bank Transfer)

Kanta Flex’s elastomeric bridge bearings with simple reinforcement are made up of multiple elastomer layers separated by reinforcing steel plates moulded on the actual layers, and can be manufactured in a rectangular or circular shape to meet individual engineering requirements.

Bridge expansion joints are structural components designed to provide smooth passage over the gap between adjacent sides of a deck joint, while also permitting relative translation andor rotation of the two sides of a bridge deck (deck movement joint).

Metallic and Non metallic Expansion Bellows are generally custom built as per client’s specification with all external influences such as oil, grease, dirt, dust, abrasives and weld splatters These Expansion bellows helps in preventing gas leakage and thereby are demanded in a variety of engineering and Steel, All process Industries and automobile industries We are into the manufacturing and supplying of a wide range of expansion bellows We are supplier of highly durable Metallic and Non Metallic and Rubber Expansion Bellows that are extensively used in pipelines The product Expansion Bellows is mainly used in fertilizer, chemical and steel industries.

• Application: Structure Pipe
• Feature: Quality approved, Dimensional accuracy

The bellows and expansion joints can be tailor made to meet specific requirements of the customer within the available product range. Metallic Bellows expansion joints are designed as per EJMA standard. Bellows expansion joints are employed in piping systems to absorb differential thermal expansion while containing the system pressure. They are being used in Refineries, Chemical plants, Nuclear Power System, Heating and Cooling system etc.

• Material: Glazing Rubber
• Shape: Round
• Brand Name: ARP
• Color: Black
• Weight: 5 kg
• Working temperature: 5 - 45 deg C
• Max Temp. Range: -20 to +150 Deg C
• Extension: 20-25 mm

We Manufacture Rubber Expansion Joints of size from 25 NB to 1600 NB which are used in all systems conveying fluids under pressure and or vacuum at various temperature.

• Size: 100-1000mm, 1000-2000mm, 2000-3000mm
• Type: Universal Bellows
• Material: Carbon, Carbon Steel, Neoprene, Rubber
• Shape: Oval, Rectangular, Round
• Thickness: 1-5mm
• Condition: New
• Pressure: High Pressure, Low Pressure
• Country of Origin: India
• Brand Name: MB Metallic Bellows
• Certification: IBR Certified
• Standard: ASME EJMA

• Brand Name: Non Metallic Expansion Joints
• Minimum Order Quantity: 5 Piece