Fume Hood Dealers in Mugalivakkam, Chennai

aboratory fume hoods are the first defense to minimize chemical exposure to research workers and to drive-our hazardous chemical fumes, odors and vapors generated during the laboratory process work. They are considered the primary means of protection from inhalation of hazardous vapors. It is, therefore, important that all potentially harmful chemical work be conducted inside a properly functioning fume hood. “Bio-cleanair”  Fume exhaust hoods are available in the type of Conventional hood,Conventional bypass hood & Auxiliary hoods with ducted or ductless with activated carbon filter types for the organic chemicals processing areas. Available in the MOC of Melamine laminated wood, electro-Galvanized iron with polyurethane paint coated matt finish, FRP-GP & FRP Bisphenol “A” Fumerate resin and IS 304 / 316 Grade SS with finish 4 polish / mirror finish.

We offer Fume Hoods. our company is recognized as one of the preeminent fume hoods manufacturers & exporters from india. the fume hoods, offered by us, are loaded with advanced configurations meeting the international standards. metal of construction : 18 swg electro galvanized iron sheets with work top made of granite (duly epoxy powder coated)/ stainless steel/ pp/frp depending upon the requirements & budgets of the customers) accessories : air velocity monitors/alarm system (imported)polypropylene sinkpolypropylene drip cupselectrical amenities uses : elimination of noxious and carcinogenic fumes generated in the wet analysis laboratoryto ensure hazard-free and safe working atmosphere to the scientists, chemists and other staff members. ideal for : light fittingselectrical outletssink with water tapsvalvesas per customers’ requirements attributes : operating with low noise i.e. less than 70 dbavailable with appropriate blower/impeller to exhaust the fumesmaximum fume suction capacity of 1200 cubic feet per minute (we can also make available variable air volume fume hoods for air-conditioned laboratories)suitable polypropylene (pp gel) ducting is provided with frp lining, flanges, and elbows based on the type & velocity of fumes to be extracted outworking surface of fume hoods is black granite of thickness 19-20 m or epoxywe can provide single/ double doors for fume hoods that are balanced with suitable counter/sash weights, wire ropes & pulleyssuitable modular structure of various sizes can be arranged at the bottom of hoods for enabling storage of chemicals, re-agents & other useful materialsif lpg cylinders are to be kept at the bottom, provision for same can also can be givensuitable scrubbers (optional) can be provided as per the requirement of pollution control normswe can also provide air velocity / alarm monitors in fume hoods to check temperature/pressure of fumes exhaust system, at extra costs (clients can opt for such monitors according to their budget)the required number of brass/copper valves for air, water, nitrogen, outlet, vacuum, are provided on specific requirement of customersthe fume cup-boards delivered are performance guaranteed for 12 months (we visit our customers on regular intervals to monitor efficiency of the fume cup-boards)

We offers a wide range of Fume Exhaust Hood to suit every specific application of the user. These are designed to exhaust toxic, or otherwise harmful vapours etc, for protecting laboratory personnel and equipments. Fume exhaust hoods provided by us are made of water proof ply & block boards. Its external body is fabricated from laminated sheets and interiors coated with epoxy paint.

A fume hood or fume cupboard is typically protect only the user, and are most commonly used in laboratories where hazardous or noxious chemicals are released during testing, research, development or teaching. They are also used in industrial applications or other activities where hazardous or noxious vapors, gases or dusts are generated or released. A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height, Because one side (the front) of a fume hood is open to the room occupied by the user, and the air within the fume hood is potentially contaminated, the proper flow of air from the room into the hood is critical to its function. Much of fume hood design and operation is focused on maximizing the proper containment of the air and fumes within the fume hood Fume exhausts hoods manufactured by us as per customer requirements. The inner wall of the working chamber is covered with epoxy coated or FRPlining or as required. The working table is made of acid proof 6mm thick FRP/18mm thick Granite and provided with gas/air Petcocks and additional power points, diffused fluorescent tubes.The front shutter is of shatter proof clear glass/poly carbonate sheet, framed in suitable structure with vertically sliding facility and is connected with counter weight balancing arrangement.Fume exhaust hoods are provided with suitable ducting of FRP or PVC material with required diameter, two main types exist, ducted and recirculating (ductless). The principle is the same for both types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room. The exhaust system consists of a dynamically balanced centrifugal impeller, made of PVC/Aluminum, directly coupled with a industrial blower of 1440 RPM 1Phase or 3 phase 230/415 V and controlled by a DOL starter.

air shower entry systems, Scientific Instruments, Powder Dispensing Booth

• Separate valves for Air, Vaccum, Nitrogen provided.: Customised Colors

Laboratory Fume Hood. Fume Hood manufacturers in India A fume hood is a type of local ventilation device that is designed to limit exposure to hazardous or noxious fumes, vapors or dusts. A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height. Fume hood exhaust options Constant air volume (CAV) This hood is on to close the sash from the air "bypass" can be pulled through the opening. Bypass, close the sash, to reduce the opening of the sash, is located so as to increase the opening of the bypass. Air passing through the hood sash is positioned a certain amount, even if it is not maintained without changing the fan speed. Variable air volume (VAV) Location of the frame, as well as to control the ventilation system knows how much the frame is open, this hood works. Can controls that are known connection with the fan speed and thereby increase or decrease the amount of air that must be spent by the system. Fume hoods are one of our premier products built, We are the leading Fume Hood manufacturers in India Engineered to excel, the creations of precision are designed with 6mm thick epoxy polyester resin lined with FRP Bisphenyl 'A' fume rate resin reinforced with 18 SWG Electro-Galvanized Sheet to accommodate large and complex apparatus set up. The fume Hoods have single, automatic, vertical. sliding, concealed type, acrylic glass door balanced with counter Weights, sash weights, wire rope etc. Fume Hood Baffles A stable, non-adjustable, removable baffle system with three fixed horizontal slots aids in distributing the flow of air into and through the hood. The baffle is spaced out 2-1/4" from the back liner. Fume Hood Duct To ensure durability, the Fume Hood Duct is constructed with 200mm dia 4mm thick rigid FRP pipe of height 10' with suitable rain ho

Fume Exhaust Hood, Modular Clean Room, Metal Door, Garment Cabinet

Fume Hoods, island table, Scrubber, Instrument Table