Gas Welder Dealers in Chennai

• Voltage: 120 V; 230 V; 220 V
• Power: 1100 - 1450 W
• Welding Additive: Ø 3–4 Mm / 0.12–0.16 In
• Material Output Ø 3 Mm: 0.2 - 0.5 Kg/h
• Material Output Ø 4 Mm: 0.3 - 0.8 Kg/h
• Welding Materials: PE; PP; LDPE; HDPE; LLDPE; TPO
• Weldable Sheet Thickness: 5 - 12 Mm
• Air Guide: Internal
• Screw Heating: Air Heated
• Air Temperature Control: Closed Loop
• Display: Yes
• Plug: Us, 2 Poles, 15a, Polarized; Ch T11, 2 Poles, 10a; Au, 2 Poles, 10a; Kr, 2 Poles, 16a; Cee Blue, 3 P

Outstanding TIG weld characteristics High, practical duty cycle Extremely robust, guaranteed fall protection from up to 80 cm height (DC) and 60 cm (AC/DC) With non-contacting HF ignition (can be changed over to ContacTIG) Automatic gas management Connection for hand or foot remote control Electrode welding with Hotstart, Anti-Stick and Arc-Force regulation Compact and light in weight Provided with InsideCoating: optimum dust protection for a long service life Full power even in the case of voltage fluctuations and when using long cables Generator-compatible Highly efficient and low energy consumption due to the most modern power electronics and the fan on demand function “3 steps to weld” operating concept Manufactured and tested according to DIN EN 60974-1, with CE mark, S-symbol and IP 23 Additional in the ControlPro Exact-amp, digital welding current display Job memory for up to 4 welding tasks (2 x TIG, 2 x electrode) Pulse function: Pulse up to 500 Hz Additional in the AC/DC

MIG-MAG Welding, also known as Gas Metal Arc Welding, uses a continuously fed wire electrode to form the arc and to provide filler metal and a gas shield to blanket the weld and to protect it from atmospheric contamination.

The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect, and reproducible results time and time again. With an output of 500 A, the TransPuls Synergic 5000 meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, and in shipyards. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding, as well as manual or robotic applications.

• Automatic Grade: Automatic
• Voltage: 230 V
• Power: 1700W
• Usage/Application: For Welding
• Output Current: 0-100 A
• Brand Name: Forsthoff
• Frequency: 50Hz to 60Hz
• Listing: CS-HWM-ETL-20
• Temperature Range: 80 to 530 Degree Celsius
• Speed: 1 to 7.5m/min
• Welding Seam Width: 20mm
• Weldable Materials: PVC, TPO, EPDM
• Protection class: Class I
• Model: Foiler ETL 20mm

• Brand Name: Rilon
• Technology: Inverter Bases

• Country of Origin: Made in India
• Capacity: 400 amps
• Phase: 3 Phase

* Manual wire feed welding (2 steps) * Spot welding: gives the possibility of welding two overlapped metal sheets with welding spots, when having access only from one side * Adjustable burnback: eliminates the sticking of the welding wire to the weld puddle or to the contact tip * Adjustable soft start. This result is a smooth welding arc start * ONOFF switch to turn off the machine without changing the power adjustment * TURBO: fan cooling system * Overload protection * Wheeled welder * Equipped with Euro connection torch

• Rated Input (V): 3 Phase AC 380 V +- 15 %
• Frequency (Hz): 50-60
• Rated Input Current (A): 20
• Output Current (A): 10-400
• Duty Cycle (%): 60
• Weight (Kg): 28
• Dimensions (mm): 494 X 327 X 360

• Current: 35-95AMPS
• Welding Type: MIG Welding
• Voltage: 220V
• Application: MIG WELDING
• Automatic Grade: Automatic
• Brand Name: Stanley
• Model Number: MIKROMIG
• Technology: Inverter Bases
• Body Material: SS
• Minimum Order Quantity: 1 Piece

• Weight: 28.1 Kg
• Protection Class: IP 23
• Dimension: 560 (L) x 250 (W) x 435 (H) mm
• Mains Voltage Tolerance: + 15 %
• Mains Fuse Protection: 16 A
• Welding current three-phase TIG: 3 - 300 A
• Welding Current Three-Phase MMA: 10 - 300 A
• Welding Current Single-Phase TIG: 3 - 220 A
• Welding Current Single-Phase MMA: 10 - 180 A
• Open-Circuit Voltage: 89 V
• Standardised Working Voltage TIG: 10.1 - 22.0 VV

• Fuse: 10A
• Open circuit voltage: 14 – 30 V
• Voltage positions: 10
• Duty cycle: 100% 105 A
• Duty cycle: 60% 125 A
• Duty cycle: 30% 155 A
• Current range: 20 – 200 A
• Wire real dimension: 5 – 15 kg
• Wire speed: 1 – 15 m/min
• Power supply: 400V AC, 3Phase

• Phase: 3 Phase
• Automation Grade: Automatic
• Power Factor: 0.93
• Material: Stainless Steel
• Efficiency: 85%
• Power Source: Electric
• Minimum Order Quantity: 1 Unit

.

Welding Accessories, copper brazing, Earthing Clamps

tig welders, arc welder, cnc cutting systems, Inverters, WELDING CABLES

tig welding equipments, Welding Equipments, mig welding equipments, Cables

inert gas welders, plasma cutting torches, Tungsten Bars, Tungsten Rods

tig welding equipments, Earth Clamp, Hand Tool, Drill Machine, safety glass

We are dealing best hot-air welder supplying company.

CO2 Welding Machine, inverters as well as conventional machines