Network Gateways Dealers in Saidapet, Chennai

We offer fixed wireless terminal. Main function & features 1) simple to install and easy to maintain 2) steady industrial module(sim340) and reliable design ensures good performance 3) provides optimized circuit directly connecting the exchange device for extensions 4) compatible to most telephones, pbx and voip gateways (for call termination) 5) connect to alarm systems to realize wireless alarm(for security use) 6) strong signals with high gain antenna 7) support sim card (1.8v,3v) 8) support dtmf 2'nd dialing out 9) dtmf clip(caller id display) 10) hide subscriber caller id (been sent out) 11) provides reversal polarity signal for metering 12) signal indiator and power indicator and working status indicator 13) suitable for wide voltage range and low power consumption 14) suitable for all kinds of weather and environment 15) locking pin network (optional) 16) gprs function(optional) 17) support imei change(optional) 18) back up li-ion battery(optional) specifications 1) air interface standard: gsm8501900mhz,9001,800mhz phase 2+ full band 2) frequency ranges: a) gsm 850 gsm 1900: i) transmission: 869.2 ~ 893.8mhz i) transmission: 1, 930 ~ 1, 990mhz ii) reception: 824.2 ~ 848.2mhz ii) reception: 1, 850 ~ 1, 910mhz b) gsm 900: gsm 1800: i) transmission: 890 ~ 915mhz i) transmission: 1, 710 ~ 1, 785mhz ii) reception: 935 ~ 960mhz ii) reception: 1, 805 ~ 1, 880mhz 3) channel space: 200khz 4) user line, bell signal: in line with gbt15279 5) max power: 0.25w 0.5w 6) consumption: a) immobility: less than 25mah b) transmission: less than 400mah 7) sensitivity: -105db 8) dial tone frequency: 450mhz (standard) 9) surrounding temperature: -10°c ~ +40°c 10) relative humidity: 45% ~ 90% (without frost)

GW1102-2D(RS-485) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-485/422 serial (5 bit terminal block) and 1 port 10/100M Ethernet.Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.The products using EMC protection design, can work in rugged environment.   1.Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2.Support 1 port 10/100M Ethernet3.Support 2 Port RS-485/4224.Support WEB and Telnet configuration5.Convert between Modbus TCP and Modbus RTU/ASCII6.Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7.Support ID mapping function, to achieve the management of the host ID8.300bps~115200bps baud rate and nonblocking communication9.Support IP address and MAC address filtering function10.Slave mode support 16 TCP master connections11.Master mode support 32 slave TCP connection requests12.Support Response Timeout and Interval Timeout setting13.Support cross-gateway and cross-router communication14.IP30 protection grade, metal shell, wall mounted installation15.No fan, low consumption design16.Working temperature: -40～75℃   Ethernet portStandard: 10Base-T, 100Base-TXProtocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCPSignal: Rx+, Rx-, Tx+, Tx-Speed: 10/100MbpsWorking: Full-duplex and half duplexTransfer distance: 100mConnector: RJ45Serial portSerial port number: 2 ports RS-485/422RS-485 signal: D+ (A), D- (B)RS-422 signal: T+, T-, R+, R-Parity bit: None, Even, Odd, Space, MarkData bit; 7bit, 8bitStop bit: 1bit, 2bitBaud rate: 300bps～115200bpsRS-485/422 transfer distance: 1200mRS-485/422 connector: 5 bits terminal blockProtection: class 3 staticMaster mode: 32 TCP slaves Slave mode: 16 TCP mastersWork mode: RTU Slave, RTU Master, ASCII Slave, and ASCII MasterLED IndicatorPower (PWR)Ethernet port connect status (Link)Serial port data indicator: TX1~TX2, RX1~RX2;Power requirementsInput voltage: 9~48VDCNo-load consumption: 0.90W@9VDCFull-load consumption: 1.25W@9VDCEnvironment limitsWorking temperature: -40~75℃Storage temperature: -40~85℃Relative humidity: 5%~95%（non-condensing）MechanicalShell: IP30 protection, metal shellInstallation: Wall mountingWeight: 250gSize (L×W×H): 100mm×69mm×22mmStandardEMI: EN 55022 Class A, FCC Part 15 Subpart B Class AEMS: EN 61000-4-2 (ESD), Level 3Shock: IEC 60068-2-27Free fall: IEC 60068-2-32Vibration: IEC 60068-2-6 WarrantyWarranty time: 3 yearsCertificatesCE, FCC, RoHS, UL508 (pending)Packing List1. GW1102-2D(RS-485)-P(9~48VDC) ×12. User manual ×13. Straight network cable ×14. Power adapter ×15. CD ×1 6. Warranty card ×17. Certificate of quality×1Optional accessories:DIN-Rail Mounting Kit (35mm) ×1

• Features: Smooth finish, Safe to use, Perfect quality

• Country of Origin: China
• Brand Name: Embsys

• Model Number: WCT805M

We are offering wiman wct-805 is a smart modbusrtu to gprs gateway, designed to transmit data transparently over gsmgprs cellular networks. Gateway is integrated with 32bit arm cortex, with application firmware to communicate with gsmgprs engine. It can operate as server or client mode; accept with dynamic ip or static ip. As compare to pstn or gsm dialup or lease line, the wct-805 with gprs communication link provide a cost economical approach to achieve a “always on” packetized data network. Easy to plug and play allows to migrating your traditional serial communication system to the advance gprs link, without tedious application development and in depth knowledge on at command or gprs. You can view the device like “virtual serial wire over the air” that links all your remote equipments to the central pcserver. It is a full transparent protocol in-dependent gateway. It is easy to configure, manage, and monitor remote devices on a private network over the internet. The products also come with built-in io that can be configured to indicate the priority of events. The device can configured or update firmware over the air (ota).