Gear Pumps Dealers in Chennai

According to the needs and demands of our clients, we are engaged in offering a large array of Hydraulic Gear Pump. These products are simple to use and needs very low maintenance. Advanced technologies and modern machines are being used while manufacturing these products. We are offering these products at industry leading rates. Features: Highly reliable Good Durability Removes stains with extreme softness Very long service life Specifications: Type : Flange/Threaded Flow Capacity : 1.2 to 227 LPM Pressure Range: 0 to 200 Bar

• Type: Gear Pump, Hydraulic Pumps
• Application: Industrial, Vehicle, Hydraulic Pump

Casappa offers a wide choice of gear or piston pumps and motors for open-circuit applications

With the assistance of our secured payment procedures, our clients prefer us all the more. Our transactions support online as well as offline modes. Following strict industrial norms and guiding principle, we strictly conduct quality examinations for the raw materials and the final product range. Thus, you can rely on us.

We are offering gear pump that is appreciated for its features such as high performance and superior quality among the clients. Gear pump serves the requirement of diverse industrial applications. We offer gear pump in various specifications to meet the requirements of the clients. specifications : pressure : o - 350 barrange : upto 250 ccvalves : direction control / pressure control / flow controleqult to vickers / rexorth / parker / yuken used in : cement industrysugar industrypower industryautomobile industry.

• Type: External Gear Pumps
• Application: Industrial
• Weight: 0-25kg, 25-50kg, 50-100kg
• Frequency: 50Hz, 60Hz
• Driven Type: Electrical, Hydraulic
• Pressure: 0-5Bar, 10-15Bar, 15-20Bar, 5-10Bar
• Motor Power: 10 HP, 2 HP, 3 HP, 5 HP
• Phase: Double Phase, Single Phase, Triple Phase
• Pump Speed: 1440Rpm, 1800Rpm, 2900Rpm
• Flow Rating: 0-3000 LPH, 3000-6000 LPH
• Flow Rate: 10 - 3000 LPM

Daito Kogyo has supplied various types of gear pumps with the latest technologies at reasonable price for more than 80 years. These gear pumps are being used in various fields including Automotive, Rubber, Food products, petrochemical, power generation, medical, pharmaceutical etc.

Types Pedestal Gear Pump - Light Duty Pedestal Gear Pump - Heavy Duty   Features Max. pressure: 125 psi Lip or packing seals Shaft bushings Max. viscosity: 500 SSU Self-priming Bidirectional rotation   Applications Transfer a wide range of nonabrasive or nonparticulate viscous liquids with a continuous, near-pulseless flow in many industrial, commercial, marine, or agricultural applications. All have keyed shafts, a seal flush chamber. Cast-iron and bronze models have pressure relief valves. Ball bearings allow use with pulley-drive systems. Note: Higher-viscosity liquids (100,000 SSU) must be transferred with more horsepower at reduced speeds.

• Brand Name: Inlet
• Power: Electric
• Power Source: AC Powered
• Motor Horsepower: 2 HP
• Pump Type: Gear Pump
• Model Name/Number: RCC0085
• Usage/Application: Industrial
• Automation Grade: Semi-Automatic
• Discharge: 227LPH
• Item Code: 4060
•  :  

• Application: Industrial
• Features: Compact design , Longer working life , Quality tested

A Parker pressure-loaded gear pump consists of two, intermeshing, hardened-steel, precision-ground gear, assemblies. These precision gears are enclosed by a high-strength, die-cast aluminum front cover, back cover and a high-yield, strength-extruded aluminum center section.Gear assemblies consist of one drive gear, shrinkfitted on a precision-ground and polished drive shaft. This shaft extends outside the pump to permit coupling to an external prime mover. The second gear, being the driven gear, is also shrink-fitted on a precision-ground and polished driven shaft. Retaining rings, which are installed in grooves provided on the shaft, ensure that the gears will not move axially, and a key keeps the drive gear from moving radially.A lip-type, shaft seal is provided at the drive shaft to prevent external leakage of pump fluid. The sealing lip in contact with the fluid is spring-loaded. Vent passages within the housings and driven shaft communicate pump inlet pressure to the rotary seal area, thus imposing the lowest possible pressure at the rotary seal for extended seal life.Pump rotation is dependent upon the proper orientation of the heat shield, backup gasket, and rubber seal in the front cover housing, the center section and rear cover, respectively. Pumping action is achieved by connecting the pump drive shaft to a prime mover, and rotating the gears away from the inlet port. Rotation causes the gear mesh to increase on the inlet side and decrease on the outlet (pressure) side.

• Pressure: To 250 bar
• Temperature: To 420°C
• Capacity: To 340 m³/hr
• Viscosities: To 440,000 cSt

Features & Benefits Internal Gear Pump with Jacketed & Non-Jacketed construction, with or without Relief Valve. Engineered Product with various material/coating options to meet various applications. External Gear Pump for low capacity high head application with moderate viscosity. Lobe Pumps for hygienic, sanitary, viscous & low shear Product transferring. 3 Year Warranty on Universal series.

• Features: Superior finish, Durability, Easy to install.

• Motor Horsepower: 5 HP
• Head: 0-5m
• Phase: Single Phase
• Motor Speed: 1000 RPM
• Discharge: 150-200 LPH
• Maximum Pressure: 50-100 bar

• Working Temperature: +350 Degree

FeaturesHigh Volumetric EfficientNo damage in liquid structureMore ReliableEasy MaintainableSuit for all the industrial requirements   Description Application:-Loading / unloading of Lube Oil , Fuel oil and any industrial liquidsRailway wagon , Truck tankers, Ships and Tankers-Bulk cargo handling.Process pumping of high viscous products, bitumen, molasses, soap and similar products.

• Type: single or tandem gear pump
• Rpm: 22.70 to 100.00 lpm
• Working pressure: 200 bar
• FLOW, LPM: 6.1 to 40.00 lpm

Make: Rexroth Model: R9830322 , AZ PW 21 004 RQR XX MB   Suction delivery: flange mounting

• Features: Elevated functionality, Smooth operations,Rugged

• Pressure: 150-200 bar
• Flow Rate: 10 LPM
• Motor Speed: 3000 RPM

• Max. pressure:: 125 psi
• Max. viscosity:: 500 SSU

SALIENT FEATURES Intermittently transfer a wide range of nonabrasive or non particulate viscous liquids with a near-pulseless flow in many industrial, commercial, marine, or agricultural applications. CAST-IRONPedestal Gear Pump Max. temp.: 280°F (Viton® lip seal); 210°F(Teflon® packing seal) Ideal for handling oil-based liquids.Wet-end components are cast-iron,steel, Hilite-55(Cellulose), and Viton. Nos. Sug91 to Sug96 have wet-end components of steel, cast-iron, Hilite-55(cellulose) and Teflon. Steel spur gears. Zerk model use Teflon and nonZerk model use Viton lip seal. BRONZEMax. temp.: 210°F (Teflon® lip seals) Ideal for handling water-based liquids. Nos. SU-B1R43 to SU-B5R48 have internal pressure relief valves. Nos. SU-B1Z31 to SU-B5Z36 have wet-end components made from: 304 stainless steel, bronze, Carbon graphite bush, brass, Hilite-55(cellulose) and Teflon. Bronze Spur gear.   BASIC DESIGN FEATURES Max. pressure: 125 psi Lip or packing seals Shaft bushings Max. viscosity: 500 SSU Self-priming Bidirectional rotation

• Phase: 3 Phase
• Max Flow Rate: Starting From 15 LPM
• Brand Name: rotary gear pump
• Motor Horsepower: 1 HP
• Nominal Displacement: Positivie displascement

• Condition: NEW
• Size: STANDARD
• Capacity: 4000 lts
• features: Type of oil (light / heavy), Wide array of 400 products

We are offering fuel oil gear pump.