Geze India Private Limited Guindy, Chennai, Tamil Nadu

GEZE sliding door systems for manual wood and metal doors GEZE offers a wide range of fittings solutions for functional and optically appealing sliding door systems, room partitions or other moving elements with wood or metal leaves. These enable considerable design freedom and planning flexibility. Demanding technologies, high-quality materials and first-class workmanship move the roller carriages precisely, gently and quietly over the guide rails and make the fittings system extremely durable with a long-life.

    Automatic revolving door with Servo for increased traffic that is to be handled conveniently and smartly. Extended capacity with door diameters up to 3600 mm. Product features Activated by a short push of one of the leaves, the revolving door accelerates and turns at the adjustable automated speed For buildings with an almost constant range of users who are familiar with the activation of revolving door systems, for example, office buildings Operating modes: "Automatic", "Permanently rotating", "Shop closing", "Hand" and "Night" It is type-approved according to DIN 18650 and certified

GEZE E 350 N (230V) spindle drive,For direct opening of heavy windows in façades, roofs and domelights, Inward-opening and outward-opening casements, Only for Solo mode. For Syncro mode use the E 250 NT with a power supply.

  GEZE smoke switch control unit RSZ 6Smoke switch and power supply for all GEZE hold-open mechanisms The GEZE smoke switch control unit RSZ 6 in the typical GEZE design has an overall height of 30 mm. It is connected to the 230 V power supply system and supplies the connected hold-open mechanisms reliably with 24 V DC voltage (max. 200 mA). The smoke switch control unit is mounted on the vertical wall above the door opening, thus making the early detection of fire and smoke possible (please keep at least 20 mm clear of the ceiling). If an alarm is triggered, the voltage supply to the hold-open mechanisms (e.g. electrical hold-open device in the guide rail or holding magnet) is interrupted and the doors close immediately.  The connection of two additional ceiling-mounted alarms may be necessary depending on requirements. The integrated smoke switch has an automatic adaptation of the alarm threshold. This compensates light soiling of the smoke chamber and increases service life. The current state of the smoke switch is shown by an optical signal. For more Information, please click on the Product brochure GEZE actuation devices and sensor systems.

Sliding door systems for convenience and perfection Sliding doors are space-saving, elegant and modern. Glass sliding doors are ideal when it comes to making good use of daylight and fulfilling optical criteria. The automatic sliding doors from GEZE can be used to implement the widest range of application requirements within a building. The operators in the Slimdrive sliding door series have a construction height of just seven centimetres and blend perfectly into any building’s architecture as well as offering a wide range of applications. The ECdrive is economic and extremely reliable in its functionality. The Powerdrive is a real power package and is capable of moving heavy doors conveniently and safely. Reduction and perfection are close friends. GEZE offers a complete range of automatic door drives with "7 cm operator hight", type-approved and certified in accordance with DIN 18650. The very low construction height enables almost invisible integration into the facade.                                            

Sliding fitting systems Sliding door fittings are made up of a runner and the roller carriage that it carries, these move the connected sliding door leaf and any other elements. Whether it be a roller or a bearing based sliding door fitting, GEZE offers a comprehensive range of fittings for glass, wood and metal sliding doors that are also suitable for use with highly demanding applications in commerce and industry. Demanding technologies, high-quality materials and first-class workmanship move the roller carriages precisely, gently and quietly over the runners and make the fittings system extremely durable with a long-life. The roller sliding door fittings of the Rollan and Perlan range are particularly suited to indoor applications. Their particular benefits include extreme runner quietness and filigree design. A wide range of accessories ensures solutions to meet just about any application. Glass solutions can be implemented, among other things, using the design fittings. The tried and tested roller sliding fittings system Apoll is designed for industrial use and is capable of moving particularly heavy doors and gates. The traditional bearing sliding fitting Perkeo with its very small construction dimensions is characterised by precision and extreme payloads. It is used in transport vehicle, passenger aircraft and ship building as well as for industrial applications, for example, for protective mechanisms in machine engineering.

Sliding door fittings are made up of a runner and the roller carriage that it carries, these move the connected sliding door leaf and any other elements. Whether it be a roller or a bearing based sliding door fitting, GEZE offers a comprehensive range of fittings for glass,

Sensor strip for safeguarding automatic swing and revolving doors in accordance with DIN 18650 / EN 16005 The energy- and space-saving GEZE sensor strip GC 338 is a "travelling" sensor for securing swing doors that are up to 1200 mm and 1500 mm wide. It functions on the basis of active infrared technology and optical triangulation. The sensor strip is mainly used with difficult floor conditions (e.g. floor mats, metal rails, dark and light-absorbing floor coverings).  The close-meshed detection field with a wide field of detection over the whole door width provides special protection at the primary and secondary closing edges. In addition, the sensor has a wall blanking feature which makes it possible to guarantee maximum safety even with doors that open against walls. The sensor strip automatically teaches itself its environment. Safeguarding all GEZE swing door drives with door leaf widths of up to 1500 mm is achieved with only one sensor system. The GC 338 not only offers advantages for installation and commissioning – the complete door system is supplied via an interface. Settings such as the position of the interface, standby mode, boost mode and grating mode can be made conveniently using the DIP switch. For more Information, please click on the Product brochure GEZE actuation devices and sensor systems.   Product features: USP background elimination: The first sensor in the world that is capable of detecting and eliminating a background The first swing door sensor in the world that switches itself off when not in use Energy savings of up to 50%, thereby protecting the LEDs and so increasing the life span Optimum door security across the entire door width - the guard plate can be adjusted to suit any door width System learns in a fully automatic way Safeguarding even on difficult ground conditions (i.e., cleaning mats, metal rails, dark and light absorbing floors, glossy and wet floor tiles, grids)   Accessories: Weather canopy for sensors with a door width of 1200 mm Weather canopy for sensors with a door width of 1500 mm

  Design & security in one The GC GR sensor guide rail is the perfect solution for cramped conditions. As an all-in-one product, this combined guide rail and sensor strip presents itself as a coherent whole, thereby meeting the stringent demands of design and aesthetics.  To save space, the guide rail and sensor are mounted at the same level, which means (for example) that they do not obscure any glass cut-outs when used on glass doors. Product features: Safety-tested in accordance with DIN 18650 Suitable for 1-leaf and 2-leaf swing doors The sensor guide rail is available for all TSA 160 NT and Slimdrive EMD versions with a guide rail The sensor and guide rail profile are available individually so that existing systems can be upgraded with ease

Safety switches and buttons used to deactivate the mains power and to enable emergency opening of automatic doors GEZE safety switches are equipped with a glass pane or a cover and thus offer protection against misuse. The switches are illuminated and can therefore be found easily even when it is dark.  Application range Safeguarding of automatic swing, sliding, folding, revolving and circular sliding doors Use in emergencies for switching off the power supply Use in emergencies for opening automatic doors Use during maintenance work for switching off the power supply Use for hold-open systems for manual release of the hold-open mechanism

Presence detectors for detecting persons or objects using active infrared technology. The GEZE product range includes safety sensor strips for securing automatic swing and revolving doors, light curtains and safety photoelectric barriers for securing automatic sliding doors and active infrared sensors for controlling and securing automatic doors. Sensor strip for safeguarding automatic swing and revolving doors in accordance with DIN 18650 / EN 16005 under normal floor situations The GEZE GC 335 is used to safeguard automatic swing and revolving doors in accordance with DIN 18650 / EN 16005. The click fitting in the sensor mounting profile reduces installation effort. The inclination angle and detection range can be adjusted mechanically. Continuous selfmonitoring means the GEZE GC 335 fulfills the highest safety standard and is thus approved for use for emergency exits. The simple design offers a cost-optimised solution. For more Information, please click on the Product brochure GEZE actuation devices and sensor systems.    

The GEZE GC 335 is used to safeguard automatic swing and revolving doors in accordance with DIN 18650 EN 16005. The click fitting in the sensor mounting profile reduces installation effort. The inclination angle and detection range can be adjusted mechanically. Continuous selfmonitoring means the GEZE GC 335 fulfills the highest safety standard and is thus approved for use for emergency exits. The simple design offers a cost-optimised solution.

Wireless control with system – reliable, convenient and secure at the touch of a button Radio-operated remote controls for a wide range of applications in our daily life bring added convenience. The elderly, disabled or physically weaker people can be afforded better quality of life, and they make work easier for care staff. They are increasingly becoming standard fittings for barrier-free and age-appropriate living.The wireless control of doors and windows using the GEZE radio programme makes connection to a power supply superfluous.  Thanks to the tiny dimensions of the radio modules, they can easily be integrated in the drive or an in-wall casing and can also be clipped directly into the elbow switch and mounted wirelessly on glass. We offer the GEZE Radio transmitter for wireless control of doors and windows as a multi channel solution. Each additional channel can be used with the click of a button to activate an additional electrical device. For more Information, please click on the Product brochure GEZE actuation devices and sensor systems.

GEZE radar detector GC 306 - Non-contact proximity push button for activating automatic doors  Open doors in a flash: With the GC 306, internal doors without a haptic perception requirement can also be actuated cleanly and comfortably. The radar detector ensures bacteria-free access to toilets, for example, or germ-free conditions in hotel kitchens, swimming pools and doctors' surgeries. The impulse generator is installed at hand height and precisely detects people and objects - independently of their direction of movement - both in the direct vicinity of only 10 cm, as well as 50 cm away.  The different scanning ranges can be optimally adapted to existing environmental conditions and the interests of the user groups. Non-contact sensors offer a high level of operating comfort - people only need to approach them to trigger the automatic opening mechanism - and the advantage of absolute hygiene. The system structure permits simple and time-saving installation both in flush and non-flush mounted sockets. Maximum protection is achieved by installing the detector e.g. behind plaster, glass or tiles.   Application area  Activation of automatic swing, sliding, folding, revolving and curved sliding doors Clean rooms with high hygiene requirements (laboratories, hospitals, operating theatres etc.) Homes for the elderly and care homes Homes for the disabled Gastronomy

The GEZE DPS display programme switch is the standard programme switch to change between operating modes and the parameterization tool for the GEZE automatic door operators.  Product features: Up to 5 different operating modes: off, night, shop shut, automatic and permanent open Uniform switch programme for new programme switches (not DPS) with other GEZE product groups Delivery of new programme switch in AS 500 switch range from Jung (DPS in ST 550 from Jung) Key or mechanical programme switch for individual requirements Authorised operation via key pushbutton possible for escape and rescue route use Universal usability for flush-mounted, surface-mounted or post-mounted switch inserts without frames (not DPS)

A new range of slimline exit hardware to suit every door application. These panic exit hardware are easy to fix and reliable in use. Successfully type tested and certified to the latest European standards

GEZE Mortise Locks, Manufactured in Europe and successfully type tested and certified to the latest European standards which suits a large variety of door,sealed body, non handed designed with reversible latch bolt,mild steel powder coated body with nickel plated solid brass latch body and zinc alloy dead bolt.

Width : 24 mm

The point of focus in the entrance area Revolving doors are a component of a facade and also the point of focus of the entrance area of a representative building. Here, it is important for the visitor to make a good "first impression" with the help of an architecturally perfect revolving door which continues to function reliably and safely despite high frequencies of operation. GEZE enables almost unlimited design freedom when it comes to the various materials and colours. The high insulation effects protecting against draughts, weather and noise mean that revolving doors create a very effective separation of the indoor and outdoor climates and contribute towards saving energy. Revolving doors made by GEZE enthuse architects, planners and processors. Starting with hotels, shopping centres and banks and going right through to airports and museums,    Manual revolving doors are suited for limited traffic and door diameters of up to approximately 3000 mm. Product features Manually operated revolving door in three or four leaf versions Ideal for use with limited traffic: The door is spacious, but not too big and can easily be operated by anybody A light push with the hand is enough to start the door turning Safety features are not necessary in accordance with DIN 18650 - Cost benefit ! Draught-free entrance area - keeps noise, dirt and dust out of the building Also available as all-glass version Operating modes: "Locked" and "Hand" The optional rotation limiter activates when the upper revolution limit is achieved and prevents a further increase of speed The optional positioning automation with a motor concealed in the ceiling or the floor turns the door, after manual access and using a low force, back to the starting position ready for the next person

The modern and "strong" automatic linear sliding door for a wide range of applications for both interiors and façades.   Product features  Particularly powerful and precise drive for large heavy door leaves and wide opening widths Escape route version: escape route function with redundant drive function and low-wear two-motor technology Intelligent digital control (category 2 in accordance with DIN EN 954-1): Self-learning Optimal convenience thanks to automatic learning of door behaviour to the access frequencies Can be networked and integrated into the building technology management systems via CAN bus Independent error recognition and protocolling Setting options for all movement parameters of the door Very quiet operating direct current drive; low-wear, maintenance free motor Integrated battery for emergency opening and closing in the event of a power failure Robust power supply with integrated all-pole mains switch and fuse Certified in accordance with DIN 18650 Combination options with the GEZE SecuLogic emergency exits (PL-FR-RWS), access control as well as the building technology management systems

High quality lever handle which are tested to the highest of European standards for durability, safety and comfort.

Length : 110 mm

Boxer for double leaf doors The Boxer ISM system is designed for double leaf doors and has an integrated mechanical closing sequence control. When closing the moving leaf whilst both doors are open, the moving leaf remains in waiting position until the fixed leaf is closed and enables the moving leaf via the closing sequence control.

  Integrated door closers – The Boxer range The integrated door closers of the GEZE Boxer range are installed fully inside the door leaf. The guide rail can thus only be seen when the door is open. The system can be used with single and double leaf doors and offers a wide range of settings options when installed.

Sliding doors have been proving their worth in industrial applications for decades. The light and easy movement of particularly large and heavy door leaves is a focus. The Apoll roller sliding door fitting system is well suited for use with particularly heavy door or gates and applications in the industrial sector. The traditional ball bearing based sliding fitting Perkeo is particularly suited to transport vehicle, passenger aircraft and ship construction and is precise with a high payload.

GEZE glass solutions for manual sliding doors Glass has replaced traditional materials such as wood or plastic for door and partitioning elements in modern buildings, in particular in offices, but also in the construction of private homes. Glass is used as a design element under new prerequisites as functional and technological aspects increase in significance. For example, glass fittings are increasingly and consciously accentuated as high-quality design versions meaning that the glass/fittings mix of technologies demands great variety. GEZE offers a wide range of solutions for functional, optically outstanding and extremely durable sliding door systems. These enable considerable design freedom and planning flexibility.