GPS System Dealers in Adyar, Chennai

We are offering gps vehicle tracking system. Gt03 gps satellite positioning tracker to provide location-based services and various business systems integration, allowing users to real-time from space and time to grasp the dynamics of target is outdoor mix, field staff, the company field staff deployment management, security vehicles and the best choice for valuables. the smart mini gps tracker gt03 can perform functions of sos alarm,virtual fence and voice monitor to ensure safety of person and vehicle. a gps tracking unit is a device that uses the global positioning system to determine the precise location of a vehicle, person, or other asset to which it is attached and to record the position of the asset at regular intervals. The recorded location data can be stored within the tracking unit, or it may be transmitted to a central location data base, or internet-connected computer, using a cellular (gprs or sms), radio, or satellite modem embedded in the unit. This allows the asset's location to be displayed against a map backdrop either in real time or when analysing the track later, using gps tracking software. Data tracking software is available for smartphones with gps capability. Specifications: • gsm: 9001800mhz • gprs: class 12, tcp ip build in gsm module. • gps: sirf star 3 lp • voltage: 7-28v dc • current: 60ma (12vdc) 35ma (24vdc) • gps positioning time: cold start 38sec (open sky) warm start 32sec • hot start 2sec (open sky) • gps positioning precision: 10m (2d rm) • temperature: -20°c ~ +70°c

Product Details: Brand Zuppa Condition New Screen Size 1.3 inch Type Wireless Usage Car, Truck, Bike, Auto Warranty 1 Year Industrial INS based Satellite Tracking GPS Module Using UBLOX Swiss made Chipset : We can deliver a completely customized our GPS Product to create a Plug in Module which can integrate seamlessly with your existing hardware on “PROJECT BASIS“. Highlights ü UBLOX NEO 8 Swiss Made Advance , Latest Top End GPS Chipset used ü Completely Made In India using our Proprietary Firmware ü End to End Technical Support ü Professional GNSS Satellite tracking (GPS, Galileo, GLONASS, BeiDou,GAGAN). ü Industry leading –167 dBm navigation sensitivity. ü Output interfaces - UART,CAN. ü IP65 standard Rugged High performance hardware waterproof. ü Easy To Use ZPA-LINK Protocol . (Similar to NMEA). Specifications High-accuracy and low signal distortion on-chip auto-calibrating architecture for continuous-time filters. Receiver type - 72-channel simultaneous u-blox engine GPSQZSS L1 CA, GLONASS L10F, BeiDou B1I, Galileo E1BC SBAS L1 CA: WAAS, EGNOS, MSAS, GAGAN Nav. update rate - Up to 10Hz Position accuracy 2D :- a) 0.8m (INS Enabled , HDOP

• Humidity: 20%
• Weight: 45g
• Fuction: position and tracking
•  :  
• GSM: 900/1800MHz
•  :  
• GPRS: Class 12, TCP/ IP build in GSM Module.
•  :  
• GPS: SiRF Star 3/ LP
•  :  
• Voltage: 7-28v DC
•  :  
• Current: 60mA (12vDC) 35mA (24vDC)
•  :  
• GPS positioning time: Cold start 38sec (open sky) Warm start 32sec
•  :  
• Hot start: 2sec (open sky)
•  :  
• GPS positioning precision: 10m (2D RM)
•  :  
• Temperature: -20°C
•  :  
•  :  
• Dimension: 90.0(L)×45.0(W)×12.0(H)mm
•  :  

  GPS Time Sync System - T-PAN-300 Time synchronization creates a platform for an entire system comprising wide range of products to operate in synchronous with time. The demand for improving the effectiveness of any system in place is met with time synchronization system deployed in the field. Troubleshooting is simplified by the application of time synchronization in the event of fault analysis. SERTEL manufactures GPS based Time Synchronization System which generates precise time stamp signals that synchronizes various network of electrical, computer, communications devices such as DCS, PLCs, LANs, Computer Buses etc. Most modern protection relays and Intelligent Electronic Devices (IED) come with ports to accept the time synchronization signal. Equipped with high precision and stable OCXO/TCXO, T-PAN-300 is capable of performing during temporary signal loss thus showing its accuracy and reliability. The time stamp in the signal could be transmitted over long distance maintaining the synchronization of the whole network. OPERATION: The signal from the satellite is collected by GPS antenna and transmitted to the GPS Receiver SERTEL GPS Receiver generates time base pulses as that in the UTC or the atomic clock in the GPS satellite from the signal received. Pulses can be generated for every second, minute or hour. Serial data packets comprising date and time information along with the pulses forms the time stamp and are made available in a variety of protocol format such as RS232, NTP/SNTP, IRIGB and many other to interface with wide range of devices. LCD displays in the front panel shows the frequency, date, time and geographical location. These can be viewed with the help of keypad upfront. The status of the GPS receiver is shown by LED indications and alerts during failure through alarm provision. Highly precise and stable OCXO/TCXO compensates for any interferences or loss of signal from the satellite thus making the operation of the receiver reliable. Redundant Master Clocks are provided for continuous functioning of the system. Integrated inside one unit are the Redundant Comparators which receive input from the GPS Receiver and generates numerous output formats embedding time signals into them. External time signal input provision as a source of time signal is provided. Signal Conditioner units are provided to multiply the time signal in various protocols such as RS232, Pulse, PFC IRIGB, TCP/IP and many others to give that many number of provision for connecting other devices for time synchronization. Redundancy in Power Supply is provided through redundant Diode Oring unit to maintain the exact voltage supply to all the units. KEY FEATURES: 12 Channel GPS Receiver and 8 Channel Continuous Tracking. Equipped with high precision OCXO/TCXO crystal for frequency maintaining micro second level accuracy. Accuracy of 187 nano seconds with GPS signal. Redundancy in GPS Receiver, Master Clock, Comparator Unit and Power Supply. Type Tests are certified by ETDC and SAMEER. 4 x 40 characters LC display in Receiver units, 6-digit Date/Time display in Master Clock units. Highly customizable Output / configurable as per customer’s requirements. Configured to work as Stand Alone Clock during temporary GPS signal loss with high tenacity. Output Integrated to 3 decimal of frequency in Hz. Capable to drive a number of Slave Clocks at large distances through multidrop mode. Low cost maintenance with durable performance. Customizable output protocols such as RS232/422/485, IRIG-B AM/TTL, NTP / SNTP, DCF77, BCD, PPH, PPM, PFC, Programmable pulse and others.

GPS System, Gsm Module