Grinding Mill Dealers in Chennai

• LED indicators for monitoring PSE, Link / Activity/Speed: WAN Capable,MAN Capable,LAN Capable

1. Complies with ieee 802.3i, ieee 802.3u, ieee802.3x , ieee802.3ab , ieee802.1q , ieee802.1p standards 2. Supports ieee802.3af、ieee802.3at standards 3. Supports poe power up to 30w for each poe port, all power up to 380w 4. Supports manage the poe port, support poe port power on/off and port output power restriction 5. Support web interface management 6. 24 x 10/100/1000mbps auto mdi/mdi-x ethernet port,support ports auto mdi/mdix 7. 8k entry mac address table of the switch with auto-learning and auto-aging 8. Supports ieee802.3x flow control for full-duplex mode and backpressure for half-duplex mode 9. Supports qos (quality of service), port mirror, link aggregation protocol 10. Supports packet length 9216bytes jumbo frame packet forwarding at wire speed 11. Led indicators for monitoring pse, link / activity/speed

We are an honored Cage Mill Manufacturer in the industry, based in India. The cage mill machine offered by us is also called Super Siever. It can crush, grind, pulverize and blend powders/abrasive materials. The high performance cage mill machine can pulverize the powder and sticky material to a homogenous mass. It can also break the lumps from the powder mass that discharges from the blender. The cage mill equipment is beneficial in the manufacturing of detergent powders, food products, industrial chemicals. pesticide powders and pharmaceutical products. Some of the key features of this cage mill machinery are mentioned below: Compact design and structure, takes up very less space Ends are suitably sealed For intermittent inspection & maintenance, a quick opening system is provided In comparison to other machines, our cage mill consumes lesser power Lumps are break into power form by SS blades SS perforated mesh is used to make ‘bottom trough’ SS/MS construction of rigid cylindrical shell The final particle size determines the ‘perforated mesh size’ To clean the cage mill, SS perforated sheets are removed in a user friendly manner

• Material: Stainless Steel
• Diameter: 145mm
• Depth: 75mm
• Feed Size: 6mm Approx
• Product Size: (60 – 150) Mesh Approx
• Product Code: ELSHADDAI MECH - 007

• Automation Grade: Semi-Automatic
• Warranty: 6 months
• Size: 150 to 300 mm
• Features: Portable
• Material: MS
• Cutting Disc Size : 4 inch, 10 inch

We are an honored Cage Mill Manufacturer in the industry, based in India. The cage mill machine offered by us is also called Super Siever. It can crush, grind, pulverize and blend powders/abrasive materials. The high performance cage mill machine can pulverize the powder and sticky material to a homogenous mass. It can also break the lumps from the powder mass that discharges from the blender. The cage mill equipment is beneficial in the manufacturing of detergent powders, food products, industrial chemicals. pesticide powders and pharmaceutical products. Some of the key features of this cage mill machinery are mentioned below: Compact design and structure, takes up very less space Ends are suitably sealed For intermittent inspection & maintenance, a quick opening system is provided In comparison to other machines, our cage mill consumes lesser power Lumps are break into power form by SS blades SS perforated mesh is used to make ‘bottom trough’ SS/MS construction of rigid cylindrical shell The final particle size determines the ‘perforated mesh size’ To clean the cage mill, SS perforated sheets are removed in a user friendly manner

Jet Mills (Fluid Energy Mills) Jet Mill is used for micronizing of solids of agro-chemicals, chemicals, pigments, minerals. Pharmaceuticals, thermoplastics and other heat sensitive, corrosive and abrasive materials.

LNV Technology is known for its reliable products, which are developed with design standards and latest Technology. It is also known for fast and customized solution for product and process. The mill is of two compartments, gravity flow mill consisting of a shell with end covers, supported on white metal lined bearings. Inner surface of mill shell is lined with wear resistant Hi-chrome material liners having a particular profile which provides required trajectories to balls inside mill to have maximum grinding efficiency. The ball trajectory and size of ball defines the mix of grinding operations that is impact (crushing) and attrition (grinding), and thereby will help in controlling the granulometry of mill product.

Ball Mill is fitted on a sturdy MS frame. Charging of balls and material is done by the means of opening provided in the chamber. The chamber is turning about the horizontal axis through a reduction gearbox drive through a variable speed motor.   Product Code : SAMS MECH - 002

• Condition: New,Old
• Warranty: 1 Year, 2 Year
• Material: Stainless Steel
• Voltage: 110V, 220V, 280V, 380V, 440V
• Color: Silver, Grey, Black
• Operating Type: Semi-Automatic, Fully Automatic, Manually Automatic
• Driven Type: Electric
• Capacity: 100-500 kg/Hr , 500-1000 Kg/Hr

• Brand Name: Karthick engineering
• Type: 3 Way Gear
• Power: 20 HP Motor
• Material: Mild Steel 
• Usage/Application: Industrial
• Capacity: 1000 L

Design Highlights Capable of producing output of 50 to 1000 kgs per hour, depending on the viscosity, density, input particle size and output particle size desired.   Technical Specification Power Rating: 5 HP, 2900 RPM, 415 Volts, 3 Phase, 50 cps, TEFC, Flanged, Rotor Speed: 3600 / 4000 RPM Discharge Pressure: 0.4 kg per sq.cm Hopper Capacity: 25 liters, Mounting: On castor wheels when desired. Floor Space: 500 X 800 mm Net Weight: 200 Ks (approx)   Application Pharmaceuticals Suspensions Emulsions Cosmetics

• Material: Carbide
• Diameter: 3mm
• Usage/Application: General High Speed Cutting
• Length: 75mm
• Hardness: 45 to 65 HRC

• Power Source: Electric
• Jar Volume: 100 - 2000 ml
• Balls Material: Tungsten Carbide ,Stainless Steel
• Operation: Touch Panel System with Interface Unit

We offer Horizontal Bead Mills that are sturdy in design and are known for their trouble free performance. The constructions of our horizontal bead mills are high wear resistant. A water-cooled Grinding Chamber and Frequency Inverter Drive for Pump are also attached with horizontal bead mills. These mills have Mechanical Shaft sealing and Multiple Gap Cat-ridge Screen Media Separator. Automatic Safety interlocks for excess temperature & excess Pressure are also available in our horizontal bead mill.   Gear Pump Screw pump Air operated Diaphragm Pump Flushing pump for quick colour changing Flame proof motors & controls Mechanical seal construction to suit applications PLC process controls

• 1 U RACK MOUNT: INDOOR

CATV SATELLITE IF - L BAND SPLITTER

Function   Fine grinding of solids in wet media such as dispersion, Suspension, Emulsification and Homogenising to produce stable emulsions to sub micron ranges.   User Industries   Pharmaceuticals Food Paint Ink Latex Rubber Dyes

• AVAILABLE CAPACITY: 125-150 KGS/HR
• POWER REQUIRED: 5HP
• DIESEL ENGINE: ELECTRIC MOTOR

We are the main supplier of this product.

We are offering hammer crushing plant. The material crushed by the hammer crusher through the collisions between high-speed hammer and materials. The hammer crusher were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. Working principle: the motor drives the rotor rotates of the hammer crusher at a high speed through the belt, and on the rotor there are series hammers. When the materials get into the working area of hammers, they are crushed by the rotating hammers of the hammer crusher with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushed area by the hammers of the hammer crusher for being re-crushed until they reached the required size. Advantages: high crushing ratio high fineness of discharging size simple operation process low running cost simple structure, high efficiency, light equipment quality and easy to operate and maintain application: hammer mills is used in areas of cement, construction material and mining industries for the materials with breaking strength no stronger than 200mpa. The size of feeding material is up to 450-1000mm and the average discharge size is ≤5-8mm, which is controlled effectively by multi-mode elastic adjusting mechanism. Technical specification for hammer mill: further reference to the above, below specification is for sample only. Our product is customized one it will change as per customers requirement make : star trace equipment : hammer mill size : 800 x 800 material in size : 60 mm material out size : 22 mm capacity : 10tph shaft : en8 material linear : harden square rod welded liner hammers : harden hammers chuke : inlet and outlet chuke provided frame : ismc 100 m.s channel supporting structure provide motor bed : motor bed integrated starter : (optional) motor power : 30 hp, 3phase, 415v, 50hz, 1440rpm machine weight : 1500 (approx.) scope of supply : hammer mill, motor, pulley, belt, mounting, frame, and bearing units.

The Doris Hammer Mill is simple and sturdy in construction. It is suitable for Grinding of Vegetable Products, Minerals and Chemicals etc., The Mill can virtually handle any product. Hammer Mill are most effective method of Crushing, Grinding or Pulverizing  in a single Machine. The Material are reduced in particle size by revolving Hammers and forceful Impact finished Product. Passes through adjustable or perforated discharge. A single Machine is Ideal for many different material. It is Simple to maintain and Easy to Operate. Normally Hammer Mill gives years of Trouble Free Service. Every Hammer Mill is backed up by service facilities offered by our Company.

LNV Technology is known for its reliable products, which are developed with design standards and latest Technology. It is also known for fast and customized solution for product and process. The mill is of two compartments, gravity flow mill consisting of a shell with end covers, supported on white metal lined bearings.

• Brand Name: capital lab tech
• Weight: 100 kg
• Usage/Application: Laboratory
• Material: Mild Steel
• Capacity: 50

• Power: 50 W
• Material: Mild Steel
• Voltage: 210 V
• Frequency: 50 Hz
• Phase: 1 Phase
• Capacity: 200 Litre
• Speed: Max. 1200 RPM
• Brand: Doris

Automatic reversible soaking and spraying bottle washing machine ABA is designed for commonly polluted beer, wine, soft drink, milk and Bottle washing machine consists of following parts: - Drive and movable parts of the bottle washing machine- Bottle inlet- Preheating- Caustic bath- Equipment of label removal- Inner and outer spraying and reverse cooling of bottles- Bottle outlet- Control accessories of washing machine mineral water bottles. Delivered in all stainless execution.

• Weight: 150-200kg
• Use: Commercial
• Roller Diameter: 1.2 meter
• Shell Rotation Speed: 4-20 Rpm
• Operation Mode: Semi-Automatic

• Features: Good design, Fine quality
• Power/Voltage: 100 V-240 V