hanna Equipments (india) pvt ltd Perungudi, Chennai, Tamil Nadu

The HI98108 tester features a large multi level LCD which displays both pH and temperature readings simultaneously. The pH readings are displayed with a 0.01 pH resolution and with an accuracy of ±0.10 pH. The pH range of the HI98108 is from 0.00 to 14.00 pH. An exposed temperature sensor allows for rapid automatic temperature compensated pH measurements. Temperature can be set to display in ℃ or ℉. The LCD screen has stability and calibration tag indicators. The battery percent level is displayed at start up alerting the user to the remaining battery power that is available. The pH electrode uses a unique reference cell design that utilizes an extractable cloth junction. A clogged junction will typically exhibit erratic readings that will not stabilize. Simply extracting a small portion of cloth from the meter will clear any clog by exposing a fresh, clean surface. The ability to clear any clogging will extend the life of the pH electrode. Calibration is performed by pressing the dedicated calibration button. Once in calibration mode the pH electrode can be calibrated to 1 or 2 points using the pre-programmed standard buffers (pH 4.01, 7.01,10.01). When the standard value is recognized and stability is reached, the meter automatically accepts and stores the calibration value. Setup options include automatic shut off timing and temperature unit displayed. Automatic shut-off options are to turn the meter off after 8 minutes, 60 minutes, or disabled. To enter the setup mode the user presses a button located in the battery compartment.

Fail Safe Alarm System Hanna’s exclusive Fail Safe Alarm System protects against problems caused by power supply failure or signal interruption, which are typical risks in industrial environments. An alarm condition is indicated by a red LED, located directly on the front panel of the controller. Simple Installation HI22111 has mounting holes molded into the housing to assure simple, quick and secure installation without the need for additional hardware. Isolated Recorder Output To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand. Good Laboratory Practices (GLP) The GLP feature allows users to store and recall data about system status for ultimate traceability. Quality Construction Housed in a rugged, modular, fiber-reinforced polypropylene housing that will resist the harmful effects of most chemicals. Password Protection The Hanna password protection feature keeps these controllers safe from tampering. Only users with the proper password can change the settings of these controllers.

Once the HI7698291 USB adapter is connected to the meter and to the USB port on the PC, the user can view and download meter data: status information (software version and date, SN, ID, GPS info, battery level and free memory info), as well as a summary of logged data lots and Good Laboratory Practices (GLP) information. Once a lot has been downloaded, all the logged samples can be viewed.

Once the HI76982910 USB adapter is connected to the probe and to the USB port on the PC, the user can view and download probe data: status information (software version, SN, Connector Status, Available Parameters, Password Protection and free memory info) as well as available data lots and Good Laboratory Practices (GLP). Once a lot has been downloaded, all the logged samples can be viewed.

The HI900535 is a set of two reagent and waste tubes for Hanna’s Karl Fischer titration systems.

The HI900536 is a set of solvent pump tubing for Hanna’s Karl Fischer titration systems.

The HI900560 is a replacement titration vessel assembly for the HI904 Karl Fischer titration system. The assembly includes a glass vessel, accessory port stopper, sample port cap and septum, stir bar, desiccant, desiccant cartridge, and a set of o-rings. Quick Replacement Easy to Assemble Easy Cleaning

The HI900561 is a replacement titration vessel (glass only) for the HI904 Karl Fischer titration system. The glass titration vessel is chemically resistant to withstand harsh solvents and reagents involved in Karl Fischer reactions. Quick Replacement Chemically Resistant Easy Cleaning

The HI900530 is a titrant bottle top and fitting assembly for the HI903 Karl Fischer Titration System. The assembly is specially designed to keep titrant dry from ambient moisture. It is supplied with a desiccant cartridge, cartridge fitting, titrant hose fitting, o-rings, cap, and cover.

The HI143 T-Logger temperature dataloggers are housed in a smooth, yet tough watertight casing that is sealed against ingress of dust and water jets. They can be placed with goods on the move, on supermarket shelves and in warehouses. They record the temperature at a given interval to make sure that perishable goods are not left unattended, such as on a loading dock on the other side of the world. These dataloggers can provide that extra guarantee that goods never ventured out of limits of public safety.   HI143 dataloggers can store up to 4,000 temperature samples in a password protected, non-volatile memory. The logging interval can be set from once per minute to once per 24 hour period; logging can be started through PC, the button on the face of the datalogger, or at a set time. The high and low alarm thresholds between logging intervals can also be stored. All of your collected data is password protected and tamper-proof. All parameters can be set through our Windows® compatible software through an RS232 or USB communication cradle.   Features at-a-glance Locking Wall Cradle - A convenient wall cradle holds the HI143 T-Logger in place, whether it be on a truck or in a warehouse. A supplied lock and key help to further prevent tampering. °C/°F Ranges - Through the PC application software, the HI143 can be programmed to read in Celsius or Fahrenheit. LCD Display - The LCD clearly displays the status of the datalogger, the temperature reading and units, information regarding alarms, and battery level. Data Logging - The HI143 can store up to 4,000 measurements at selectable intervals from 1 minute to 24 hours. Users can start logging through the PC software, the button on the face of the datalogger, or at a set time. PC Connectivity - The HI143 can be controlled through a PC by simply placing the instrument on the supplied RS232 or USB communication cradle. A security password is able to be set to ensure collected data is tamper-proof when transferring and organizing logged data. Programmable Alarms - High and low alarm thresholds can be programmed to alert users if the temperature readings go outside of the acceptable range. Status Indicator Light - The LED light located on the cradle blinks to indicate that communication with the PC is active during data transfer. Enhanced Battery Life - The HI143 series uses CR2032 3V lithium ion batteries to achieve a long battery life of about 2 years at 25°C.

The HI7632 is an amperometric sensor, utilizing two-pole technology to achieve accurate EC and TDS measurements. An alternating voltage is applied to the two electrodes and the generated current is measured. The HI7632 is compatible with the following mini controllers that measure in the high range: EC: BL983317 BL983327 TDS: BL983318   Internal Temperature Sensor The integrated temperature sensor of the HI7632 probe is crucial for accurate EC and TDS measurements. Changes in temperature of a solution will change the ion mobility, which will influence the measurement. For this reason it is important that a fast and stable temperature measurement be taken in order to provide an accurate temperature compensated EC and TDS reading.   Threaded Connection The ½” NPT threaded connection of the HI7632 allows for insertion mounting into a common “T” fitting without the need for additional hardware.   Multiple Cable Lengths The HI7632 is available with varying lengths of cable based on your specific requirements.   HI7632-00 comes with 2 meters (6.6 feet) of cable attached. HI7632-00/6 comes with 6 meters (19.7 feet) of cable attached.

Type : Tds Meters

Weight : 100-200gm, 200-300gm, 300-400gm, 400-500g

Color : Brown, Green, Grey, Red, White, Yellow

Voltage : 3-6VDC, 6-9VDC, 9-12VDC

Application : Tds Monitor

Display Type : Digital

Frequency : 50Hz-65Hz

Automatic Grade : Automatic, Fully Automatic, Manual, Semi Automatic

Material : Aluminum, Cast Iron, Plastic, Stainless Steel

Power Source : Battery, Electric

Feature : Accuracy, Durable, Light Weight, Stable Performance

Warranty : 1Year, 2Years

The BL121 Swimming Pool Controller is a complete system designed for maintaining swimming pool, hot tub, and spa disinfection water quality. The BL121 is available in two configurations. The basic version is the in-line model which allows for direct installation of probe and chemical injection fittings into existing piping. The other version is a panel mounted version with a bypass flow cell. The bypass flow cell allows for calibration and maintenance of the probe without having to shut down the recirculation pump. Additional features of the BL121 include LED indicators for dosing, meter status and service, real-time graph display, programmable alarms, and password protection.      

HI7662-A is a stainless steel temperature probe for the HI921 Autosampler. The HI921 Autosampler interfaces directly with the HI902C to access titration methods. High accuracy thermometers provide the versatility, speed, and reliability required by users in all areas concerning temperature measurement. Speed is important when the reactions being monitored have the potential to change rapidly. pH readings must be temperature compensated in order to obtain accurate results. The source of temperature measurement can be from the HI7662-A Temperature Sensor or from a trimmer that is manually adjusted. In either case, the instrument is adjusting the pH reading to compensate for changes in the pH sensor. Temperature compensation provides the actual pH of the buffer or sample at the temperature of measurement. Temperature compensation can be obtained in three ways: A separate probe specifically for measuring temperature A probe with a temperature sensor built-in Manual adjustment for temperature

The HI900528 is a 2 piece set of solvent port plugs for the HI903 Karl Fischer titration system. Quick Replacement Simple to Use Easy to Assemble

The HI900180 is a solvent handling pump for the HI903 and HI904 Karl Fischer titration systems.

The HI76098295 is a short protective shield used to guard the sensors from damage on the HI9829 Multiparameter Portable Meter. Its rugged design and weighted tip make it ideal for field use. The compact design is compatible with the HI7609829-3 conductivity sensor.

The HI76098290 is a short calibration beaker used during the quick calibration procedure on the HI9829 Multiparameter Portable Meter. It’s compact design is compatible with the HI7609829-3 conductivity sensor.

HI710027 is a blue shockproof rubber boot designed for select meters. The durable rubber casing ensures users have a secure grip on their instrument when using it in the field, factory, or production room floor. The HI710027 rubber boot prevents damage in the case of accidental impact and is able to withstand harsh environmental conditions. This protective boot features an opening for the face of the meter as well as at the bottom for easy access to probe connections. HI710027 is designed to fit Hanna meters that measure 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”).

The HI900542 is a complete set of o-rings for the HI904 Karl Fischer titration system. These o-rings are supplied for all fittings on the titration systems hoses and bottle covers.

The HI83900 Suction Lysimeter is used to extract soil solutions for chemical analysis of nutrients important to plant growth. This sample collection tool is built with a porous ceramic cap that is connected to a 30, 60, or 90 cm transparent tube. A rubber capillary extends from the plastic syringe through the tube, reaching the ceramic tip. The HI83900 allows operators to easily monitor the level of fertilizer nutrients such as ammonia, nitrate, phosphorus, potassium, sulfate, calcium, and magnesium.

About the BL-983314 Resistivity Mini Controllers Fire retardant casing Selectable overdose protection system Splash-resistant cover   Readings are automatically temperature compensated with three different coefficients (β=2.4, 3.5 or 4.5 %/°C). The alarm contact can be used for connection to an alarm, pump, solenoid or dosing system. The relay contact is open when readings are higher than the setpoint, while for measurements lower than setpoint, the relay contact is closed. The hysteresis is typically 0.20 MΩ •cm from the setpoint. Measurements are displayed on the LCD and the multi-coloured LED continuously indicates if the controller is in measurement, dosing, or alarm mode. Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need. The overtime control system advises users when the relay is active for too long, helping to prevent over-dosage.

The HI73128 replacement tool is utilized for electrode removal on select Hanna testers. With a simple twist of the removal tool, the tester electrode can safely and easily be removed and replaced with a new one. pH and conductivity (EC) electrodes naturally fatigue over time, requiring replacement to ensure measurements are obtained quickly and accurately.   HI73128 is used for electrode removal on the following testers:   HI98120 HI98121 HI98127 HI98128 HI98129 HI98130 HI98311 HI98312  

The HI900260 is a replacement 3-way valve for Hanna’s HI901, HI902C and HI903 Automatic Titration Systems. This 3-way valve is a critical component of the burette and dosing system. It is responsible for the rotation that directs the flow of titrant or reagent through the burette. The valve primes and purges the burette by aspirating and dispensing solution. HI900260 can easily be replaced on any of the Hanna burette syringes.