Heat Exchangers Dealers in Ekkaduthangal, Chennai

• Features: Easy installation, Durability, High utility

• Features: Easy installation, Durability, High utility

A spirally coiled finned tube heat exchanger made of a copper finned tube with medium high ribs, tin-plated exterior incl. screw connection. The pipe connections are hard-soldered to the pipe ends. These are manufactured at M/S Karthick Industries on specially developed high speed finning machines. finned tube heat exchanger Our machines are capable of finning tubes around a length of 12 m to 18 m (60 feet). We make finned tubes with base tubes of carbon steel, stainless steel, copper and copper alloys like CuNi ( copper-nickel), admiralty brass, aluminum brass and copper tins, galvanized iron tins. We do the OD of the tin tube from 16mm to 120 mm ranging from 3mm to 16mm. Currently we manufacture finned tin tubes with 4 FPI to 12 FPI (as per customer’s requirement).

Brazed Plate Heat Exchanger (BHE): By brazing the heat transfer plates, the BHE offers improved operating temperature and durability as well as being lightweight and compact body. The simple configuration with fewer parts allows a large amount of production, contributing to mass production and utilization of the customers' devices.

Two plates are laser welded with each other and are called as a twin plate or cassette. These two cassettes when joined, from channel where other fluid flows. These units are mostly used as evaporators or condensers, where the gaseous fluid Flows within the cassette and the other fluid flows through the gap formed by cassette. These units are also used in application where primary fluid is not compatible with the regular gaskets. The gasket material used is Nitrile rubber, EPDM, VITON and NEOPRENE as ring gasket. The plate material used, based on process parameters and the fluid are diversified like,SS316, Titanium, and SMO 254 etc. The PHE size in this range varies from 2” connection size to a maximum of 10 ” connection size.

Effective separation of oils, vapours and other fluid mists (aerosols). All basic elements can be cleaned and reused – no throwaway separators. Heat, flame and grease proof. Stainless steel frame. All filters come complete with a pair of handles Top and bottom drainage holes . Dishwasher safe. Compliant with the requirements of DW172   Product Description Easy clean-ability with an attractive appearance. Suitable for kitchen canopies with drip trays. When washed regularly will provide a long service life. Filters edg are made from rolled channel frames, with safety edges. Fire suppression system can be easily integrated into canopy. Standard models avaliable are wall mounted and Is-land type.

• Height: 1000 mm
• Material: Aluminum body with acrylic frame
• Size: 250 x 250 mm
• Product Code: ELSHADDAI R/AC - 003

Precision cooling system is the prime manufacturer and exporter of Timber Cooling Tower in the markets. Designed by experts with precision, our Timber Cooling Tower are consistently demanded by the clients Known for induced draft counter flow or cross flowhigh efficiencymaintenance freeminimum water lossbuilt for industrial & commercial market specifications double inlet cross flow – treated pine wood or frp / hdgsingle inlet cross flow – frptough fiberglass casing with r c c basinpr. Treated timber / wood or hot dip galvanized structureip 55 protected foot mounted motor / low rpm motorsspeed reduction gearbox / variable speed pulley & belt driveaerodynamically designed axial flow type, energy saving fan in frp / al. Alloy construction with variable pitch anglesplash bar in wood / perforated pvc v barsfrp / marine ply wood hot water distribution deckpp target spray nozzles systemmist / drift eliminators in wood / pvcs.s twisted nails & galvanized fastenersdouble inlet induced draft cross flow series is a field-erected, splash fill, cross flow, wood cooling towerdesigned to serve all normal cooling water systems—as well as those “dirty water” systemsplace the long term operation of a film fill tower in jeopardyseries is evolved from the cross flow concept of cooling towers of design advancements that our customers have found valuable applications : fertilizer plantschemical and petrochemical plantsdairies and defense factoriesautomobile industrycement and sugar industriesmachine tools manufacturing unitfurnaces manufacturing unitdiesel gen-set manufacturing unitair gas compressors manufacturing unit mechanical type, induced draft cross flow of cooling towers cross flow cooling tower crossflow is a design in which the air flow is directed perpendicular to the water flow (see diagram below). Air flow enters one or more vertical faces of the cooling tower to meet the fill material. Water flows (perpendicular to the air) through the fill by gravity. The air continues through the fill and thus past the water flow into an open plenum area. A distribution or hot water basin consisting of a deep pan with holes or nozzles in the bottom is utilized in a crossflow tower. Gravity distributes the water through the nozzles uniformly across the fill material

• Plate Heat Exchanger Type: Brazed Plate, Fusion-bonded Plate, Gasketed Plate and Frame, Welded Plate and Block, Welded Plate and Frame
• Application: Heater, Cooler, Vaporizer, Condenser
• Max Output Flow rate (m3/hr): 50-100

• Dia: 1000mm, Height : 1800mm
• Motor: 0.5HP
• Fan Blade: 500mm
• Product Code: SAMS MTL - 002

Cooling Tower  

• Medium used: Air, Water
• Finishing: Galvanized
• Application: Hydraulic and Industrial Process, Power Generation
• Material: Stainless Steel
• Features: Rugged design,Safe transport and easy to install Rugged design
• Item Code: FTHE
• Liquid Flow Rate: 2.5 m/s
• Brand: UE

Brazed plate Heat Exchanger is constructed of a series of Pressed corrugated plates in stainless steel. These plates are stacked one over other with copper foil in between for Joining and kept in oven for brazing together. The plates are stacked in such a way that flow passage one side primary fluid and another channel secondary fluid passage. Features: Small Footprint Lower Hold-up Volume No Gaskets to Replace High and Low Temperaturesv BPHE plates and channel types Certain BPHEs are available with different types of channel plates where the herringbone pattern varies. The benefit of different herringbone patterns is that the hydraulic and thermal characteristics of the BPHE can be modified. For example, two BPHEs can have the same pressure drop on both sides despite different flow rates. The fluids can pass through the heat exchanger in different ways. For parallel flow BPHEs, there are two different flow configurations: co-current or counter-current There are several different versions of the channel plate packages. Examples include: Dual-circuit BPHEDual-circuit BPHE Two-pass BPHE, which corresponds to two units connected in series. Dual-over-two-pass BPHE Material combinations There are different BPHE product categories depending on material combinations and design pressures. The standard plate materials are AISI 316 stainless steel, S, vacuum-brazed with a pure copper filler, C, or a nickel-based filler, N. For demanding applications, the plates can be made of SMO 254, a stainless steel with a higher content of molybdenum.

• Type: Shell & Tube
• Material: Carbon Steel
• Warranty: 12 Months
• Application: Power Generation
• Primary Exchanger Material: Steel
• Tube Material: Copper
• Automation Grade: Manual
• Orientation: Horizontal
• Is It Customized: Customized

We are the leading supplier of this products.

• Type: Heat Exchangers
• Certification: ISO 9001:2008 Certified
• Weight: 100-1000kg
• Grade: AISI
• Voltage: 110V, 220V
• Condition: New
• Automatic Grade: Automatic
• Power: 3-6kw, 6-9kw
• Warranty: 1 Year
• Driven: Electric

Our company has earned accolades in offering Inter Cooler to the clients. This product can be avail in different sizes, dimensions and other specifications to suit clients’ variegated requirements and gain optimum satisfaction. Inter Cooler is manufactured at widely driven manufacturing unit using the finest quality raw material and advanced technology according to the set industry norms. Offered range is also tested by quality controllers on various parameters to ensure high strength and robustness. This product is widely appreciated by clients. Inter Cooler complete with necessary valves and controls made out of SA 516 Gr.70 material.

Spiral Wound Finned Tube

Scraped Surface Heat Exchanger, steel Products, Value Test Rig

Panel Coolers, Air Chiller, Solar Cold Room, Glass Door Display Chiller

gas coolers, Heat Exchangers, hydraulic pneumatic systems, Pressure Vessel