Heat Exchangers Dealers in Chennai

The contact point inside plate gap is almost negligible. The plates contour move in parallel with each other and do not meet. This unit is unit in fluids, where either Viscosity is very high or % solid and fibrous material is very high. Free flow nature of plate help in passing of fibrous and highly viscous material without hindrance. The plates finish confirms to 3A standards. Plate gap range from 5 mm to 12 mm – all throughout - Free flow. The gasket material used are Nitrile rubber, EPDM The plate material used, SS316 etc. The PHE size in this range varies from 4” connection size to a maximum of 14” connection

Enlisted amidst the renowned Suppliers of Fin Tubes, we cater to varied demand of the customers in this sphere. For the production of our finished products, we source the raw materials only from the certified and trusted vendors after checking against numerous quality parameters.

• Speciality: Quality tested,Low maintenance,Fine finish
• Application: Industrial
• Material: MS
• Medium used: Water, Air, Oil
• Brand Name: Astraal
• Maximum Working Pressure: 250 bar
• Flow Rate: Upto 200 m3/h

Technical Parameters:  1.Effective width:1800mm 2.The diameter of preheater：Ø800mm. 3.Electric adjust the dimension of pre-heater: adjusting range is 60-270°;Ø86mm×2 4.Steam temperature.：100-200° 5.Steam pressure 0.8-1.3 MPa. 6.Work power: 440V 50HZ. 7.Motor power: 440V 50HZ.        Structural features:  1.Preheat cylinders conform to class of pressure vessel with national standards, and the pressure vessel and certificate of inspection certificates. 2.Preheating cylinder and each roller grinding pins by precision after finishing grinding and hard chromium plating processing, improving the finish reduced friction and durable. 3.Angle adjustment using electric adjustment, Angle range in 60-270 °arbitrary adjustment, which can effectively adjust paper of heated area. 4.Preheat urns adopt wing sealing head design, it can improve the cylinder block of artesian performance; Features steam heating,Ensure base paper heated evenly. 5.Angle electromotor adopt planets cycloid motor, has the good self-locking performance.The electrical components centralized control, can greatly improve the production efficiency.

• Flow Rate: 5 - 500 L/min
• Pressure: 8 - 40 kg/cm2
• Type: Shell & Tube
• Cooler Material: MS, SS
• Capacity: 500 - 100,000 Kcal/hr

“Thermovent® T” is a Heat & Moisture Exchanger (HME) which captures heat and moisture on expiration and returns it to the patient in inspiration. It is suitable for spontaneously breathing patients with a tracheostomy tube.

• Material: Stainless Steel
• Color: Multicolour
• Country of Origin: Made in India
• Usage/Application: WATER APPLICATION
• Packaging Type: BOX
• Deal In: New Only

dell poweredge t320 t420 cpu processor heatsink 05jxh7 5jxh7 dell poweredge t320 t420 cpu processor heatsink 05jxh7 5jxh7 dell poweredge t320 t420 cpu processor heatsink 05jxh7 5jxh7 dell poweredge t320 t420 cpu processor heatsink 05jxh7 5jxh7 dell poweredge t320 t420 cpu processor heatsink 05jxh7 5jxh7 dell poweredge t320 t420 cpu processor heatsink 05jxh7 5jxh7 dell poweredge t320 t420 cpu processor heatsink 05jxh7 5jxh7  

• Condition: New
• Warranty: 1 year
• Type: Automatic
• Features: Resistance against rust, Quality tested, Longer working life
• Power Source: Electric
• Application: Industrial
• Diameter of pre-heater roller: f600mm,f800mm,f900mm,f1100mm.
• Effective width: 1400mm-2200mm

Purpose and Characteristics : Electromotion heating angle adjustment. Adjustable range of 60-270 Surface of all rollers are well treated by grind and plated hard chrome,glabrous and durable. Adopt dishing seal or plat design. Insure reel paper be heated averagely. Simplex,duplex,triplex or quadplex preheater according to requirement.

• Type: Wooden Cooling Towers
• Material: Wooden
• Application: Process Cooling, Air Compressors, D.G. Sets, Plastic Molding Machines
• Weight: 1500kgs
• Condition: New
• Capacity: 1000-1500L
• Automatic Grade: Automatic
• Power: 15 hp to 60 hp
• Driven Type: Electric
• Warranty: 1year
• Temperature: 50-100℃
• Brand Name: MISTO
• After-Sales Service Provided: YES
• Cooling Type: INDUCED DRAFT CROSS FLOW COOLING TOWER

• Country of Origin: India
• Brand Name: TNEI
• Material: Metal
• Application: Laboratory

Helical coils are used for heating or cooling in process tanks. When a fluid flows through a curved tube, centrifugal force acting upon the various elements of fluid moving with different velocities causes secondary circulation. Secondary flow results in higher heat transfer characteristics. Further, secondary flow stabilizes the laminar flow leading to a higher critical Reynolds number for transition from laminar to turbulent flow.

Compressor intercoolers and compressor aftercoolers are used to decrease the temperature of the compressed to the processed area. These compressor intercoolers, aftercoolers are specialty designed and tested in all the working conditions to produce the maximum cooling with the help of cold water. The same can also be delivered / made as per your requirement / application.Price Ranges Between Rs.1000-Rs.15000

• Height: 1000 mm
• Material: Aluminum body with acrylic frame
• Size: 250 x 250 mm
• Product Code: ELSHADDAI R/AC - 003

• Size: NA
• Type: NA
• Material: Plastic
• Shape: NA
• Thickness: NA
• Certification: ISO 9001:2015 Certified
• Mesh Size: NA
• Application: NA
• Grade: NA
• Color: Black, Grey
• Feature: NA
• Appearance: NA
• Brand Name: VPE

Effective separation of oils, vapours and other fluid mists (aerosols). All basic elements can be cleaned and reused – no throwaway separators. Heat, flame and grease proof. Stainless steel frame. All filters come complete with a pair of handles Top and bottom drainage holes . Dishwasher safe. Compliant with the requirements of DW172   Product Description Easy clean-ability with an attractive appearance. Suitable for kitchen canopies with drip trays. When washed regularly will provide a long service life. Filters edg are made from rolled channel frames, with safety edges. Fire suppression system can be easily integrated into canopy. Standard models avaliable are wall mounted and Is-land type.

• Weight: 100-1000kg
• well designed: 0.5 M2-50M2

We offers shell & tube heat exchangers for hydraulic oil cooling, lube oil cooling. Transformer oil cooling, process water cooling, dieselfuel coooling.

We are offering Shell & Tube Heat Exchangers universally used in all process industries are manufactured as per ASME and TEMA standards. Thermal heat transfer analysis can be supported using HTRI or by calculation support.

Brazed Plate Heat Exchanger (BHE): By brazing the heat transfer plates, the BHE offers improved operating temperature and durability as well as being lightweight and compact body. The simple configuration with fewer parts allows a large amount of production, contributing to mass production and utilization of the customers' devices.

• Shape: Cylindrical
• Tower Material: Metal
• Country of Origin: Made in India
• Type: Perforated & Finned design
• Tower Type: Induced Draft
• Tower Design: Closed Loop
• Height: 2.5-3 Feet
• Operating principle: Ambient air convection
• Process connection size: 1/4” 3/8” 1/2” BSP / NPT (M) , M20x1.5 (M)
• Permissible pressure ratting: 100 bar (1500 psi)
• Permissible temperature ratting: 500°C (932 °F)

• Cooling Capacity(w): 150
• Operating voltage: 24V DC
• Operating temp(oC): -10o C to 60o C
• Weight(kg): 1.7, 5.5

• Material: Stainless Steel
• Usage: For Food Processing Industry
• Speciality: Excellent Heat transfer Co-efficient, Highly suitable for Milk, Ice cream mix 
• Brand: Tavron
• Capacity: 50 LPH to 30,000 LPH
• Mounting Type: Skid Mounted / Floor Mounted
• Material Grade: SS 304, SS 316, SS 316 L
• Operating System: Manual, Automation

• Automation Grade: Manual
• Voltage: 220 V AC
• Size: 12.5 mm
• Frequency: 50 Hz
• Package Type: Box
• Minimum Order Quantity: 1 Unit

• Type: Air-Cooled
• Primary Exchanger Material: Aluminium
• Automatic Grade: Semi-Automatic
• Tube Type: Seamed
• Tube Material: Aluminium
• Orientation: Horizontal
• Input Voltage: 265 V

Aluminum heatsink to some of the most prestigious projects across the country and has built a formidable reputation as a quality supplier of aluminium extruded products.KMC supplies extrusions for a wide spectrum of industries -not limited to but including transportation, architectural, industrial, electrical, and consumer durables industries.

• Frame Type: Metal
• Input Frequency: 50 Hz
• Packaging Type: Box
• Usage/Application: Heat Exchanger
• Finishing: Polished
• Shape: Round