High Temperature Furnace Dealers in Chennai

• Type: Walk-In Ovens, Cabinet Oven
• Power: 5000 - 9000 watt
• Air-Flow Direction: Vertical Down Airflow, Horizontal Air Flow
• Capacity: 0-100 Kg, 100-500 Kg
• Max Temperature ( C): 100-200, 200-300
• Display: Digital
• Size: 18'' x 18'' x 18''
• No of tray: 2

We are engaged in offering precision engineered high temperature furnace. Insulated double walled door of high temperature furnace is mounted on heavy duty hinges, in the front is provided with locking arrangements. The door is gasketted along edges to provide tight seal when the door of high temperature furnace is in closed position. Heating in high temperature furnace is achieved by kanthal a1 heating coils, evenly distributed in the inner chamber. Temperature is indicated and controlled by digital onoff controller working in conjunction with cral thermocouple housed in the hot zone. In addition, digital timer and heating achieved indication alarm to cover 30 square meter area will be provided in high temperature furnace. Air circulating fan assembly driven by suitable motor is incorporated in the unit for maintaining uniform temperature inside the working chamber. Adjusted air ventilator is provided at the top of high temperature furnace. Built in control panel accommodating indicating lamps, digital onoff controller, timer, onoff switch, etc., is located at the right side of the chamber for operational convenience. Since the high temperature furnaces are tailor-made, we can design and supply the same as per the customers' specificationsrequirements. material of construction triple walled chamber, (triple walls on three vertical sides) inner made of thick gauge stainless steel sheets of 304 grade, middle and outer made of 18 swg. Cold rolled mild steel sheets duly finished in powder coating. Inter space in between the walls is tightly packed with special grade ceramic fiber blankets to a thickness of 150 mm. technical specifications inner chamber size : 3’ x 3’ x 3’operating temperature : ambient + 5o to 500o ctemperature at unloaded condition : 550o ctemperature accuracy : 3 to 5o cpower rating : 9 to 12 kwoperating volt : 440 volts three phase 50 cys.

• Max Temperature ( C): 800-900, 900-1000, 1000-1100, 1100-1200, 1200-1500
• Chamber Size (mm X mm X mm): 2000(L) x 2200(H) x 1900(W), 2000(L) x 2200(H) x 1900(W)
• Type Of Model: Industrial
• Features: Thermocouple, Energy Regulator, Digital Display, Pyrometer, Temperature Control
• Condiiton: New
• Warrenty: 1 Year

Construction : It is triple walled construction. Inner chamber made of 304 grade stainless steel. Outer chamber is made of mild steel attractive finished in powder coating for durable operation. Inner chamber is fabricated with ribs to adjust trays to any convenient height. Oven supplied with removable perforated trays 2 or 3 depending on sizes. Trays are made of stainless steel.Insulation : It insulated by 3” gap between the walls is filled with special grade wool for proper insulation and to avoid heat losses.Door : It is double walled inner Stainless steel and outer chamber mild steel with powder coated paint fitted with heavy stainless steel hinges with spring loaded lock.Heating Elements : Heating elements are made of high-grade Nichrome wire, which are put inside the porcelain beads and placed at bottom and two vertical sides for uniform temperature all over the space.Temperature Control : The temperature is controlled by Digital Temperature Controller variable from 5o C above ambient to 250oC with a sensitivity of +/-2o C.Ventilation : Air ventilators are provided top at as well as the bottom to ventilate gases and fumes if any.Control Panel : The equipment is provided with a panel which is just below the door having a Digital Temperature Controller, On/Off switch, 2 pilot lamps and provision for fixing the Timer.Power Requirement : Supplied with cord and plug, Suitable to operate on 220V as per indicator single phase, 50 Hz AC supply.Including : Digital temperature Indicator com controller with RTD Sensor Air Circulating fan Assembly

We are the most important manufacturer and supplier of remarkable quality high temperature ovens. These ovens are specially manufactured for several industrial applications like tempering, baking and many more purposes. As per the industry norms, we make sure to use high quality components in manufacturing process. Our offered ovens are made available in different specifications to compete with clients’ varied requirements. We offer these ovens at market leading prices with no time constraints. Features: robust design easy functions even heat distribution

 Available with us is a broad range of High Temperature Furnaces which is provided with excellent features such as accuracy, efficiency, durable finish and cost effectiveness. These furnaces are oven designed and suit a number of applications in the field of medical, agriculture, rubber molding and industrial research organization. Our range of products is offered with application of dry heat with temperature ranging between 50 deg C to 350 deg. C and is in high demand all across the nation.

• Automation Grade: Semi-Automatic
• Melting Material: Iron
• Max Temperature: 1800 DegreeC
• Rated Power: 1kW
• Input Voltage: 220V
• Capacity: 4L
• Power Source: Electric
• Type Of Furnace: Tilt
• Brand Name: Wee Scientifics

“MIGHTY INSTRUMENTS” High Temperature Hot Air Oven is triple walled construction all the chambers are made out of mild steel sheet. The outer chamber with attractively finished in powder coating paint. The inner and middle chamber heat resident aluminum paint. The 75mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses on all sides including door. OPTIONAL ACCESSORIES: Microprocessor Digital Controller with RTD SENSOR Air circulating fan assembly Digital timer

We manufacture high temperature furnace which have high insulation. The furnace can operate continuously at about 1200 deg celsius. The furnace is quick heating type, light in weight, elegant design, etc. This furnace is widely used in iron and steel industries.

Technico high temperature tubular furnace is supplied in vertical or horizontal model as per the request of the customer. Double walled chamber, outer chamber made of cold rolled mild steel sheets and finished in powder coating. The inner chamber is formed by high alumina tube capable of withstanding temperature upto 1400 °C. The tube will have one end closed or both ends opened as per the requirements of the customers. Insulated with high density superior quality ceramic fibre blanket. The furnace is heated by silicon carbide heating elements. The temperature is controlled digital PID controller. The sensor will be Pt /Pt /Rh type thermocouple. The size of the tubes is available is 50 to 100 mm OD and with length of 450 mm to 1000mm   Technical Specification:  operating temperature range : 1350°C   Maximum temperature : 1400°C   Temp.Accuracy : +/-2 to 3 Deg. C   Operating Voltage : 230 Volts.   Optional Accessories: Programmble controller with Thyristor power device   End fiitings for inner atmosphere purging.   Imported silicon Carbide Rods.   End fittings with water cooling jacket.   OTHER WORKING TUBE SIZE ON REQUEST For silicon “O” rings Flow meter and valves for inlet and outlet    

Types Available: Standard or Tilting Type  Door Types: Horizontal (Front opening) or Vertical (Swirling type top opening) Temperature Ranges: 1000, 1400, 1600 or > 1800 till 3000 deg.C Working Dimensions: Chamber volume from 10 liters to 1000 liters (As per customer’s requirement) Heating Chamber: Stainless steel,  mullite, alumina and high alumina refractory (as per the temperature requirement) Heating Type: Standard or Rapid Heating (Kanthal A1, Kanthal APM, Silicon carbide, molybdenum disilicide and graphite) Atmospheric Control: Vacuum (Upto 10 -6 mbar), Oxidizing (normal) & inert with Argon, CO2, Nitrogen and Hydrogen Temperature Control: Electronic PID based ON/OFF or Programmable controllers with data acquisition system (As per customer's requirement) Safety Features: Broken Thermocouple & temperature overshoot protection. Scale Availability: Industrial & Laboratory

High quality molybdenum silicide heating element. The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller: Processing speed is high Provides flexibility to alter the system by changing software. Compact in size. Operation and maintenance easier. Maintain precise values Over temperature protection. PCRC sheet body – Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications. Digital output – Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading. Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value,thus ensuring correct measurement. Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values. Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents. Sturdy Construction-WEIBERfurnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Thermal Technology LLC designs and manufactures high temperature vacuum furnaces for laboratory and production use as well as crystal growing systems. The company has over 60 years of experience in designing and building high temperature production furnaces and has over 2000 installations worldwide. Their extensive range of Furnaces cover a large range of processes including Sintering, Debinding, Pre-Sintering or Annealing. FEATURES Options of inert, vacuum and reducing atmospheres Options of 2, 4 or 6-sided heating Excellent Temperature Uniformity Precision programing and Control Process Sequence Control Fast Cycle time Large Range of Sizes and capacities to choose from Applications Thermal technology LLC offers a very wide range of custom Vacuum furnaces to cater to the following applications: Aerospace materials Annealing / Stress Relieving Brazing Electronic Ceramics Gem Enhancement Graphite Processing Hard Metal/ Cermets Heat Treatment Optical Fiber Drawing Non-Oxide Ceramics

Consists of sillimanite refractory chamber backed by high temperature ceramic  insulation to Minimize heat loss. The furnace has a flap type door which is counter faced on its inside with   Refractory brick lining. The furnace is suitable for bench mounting. Heating is accomplished by the aid of imported silicon carbide heating rods supported at the top of the top of  the heating chamber. Heating rods are easily replaceable and access can be gained by opening terminal cover provided at either side. Control system: consists of an auto – transformer, energy regulator, digital temperature controller with a range of 0 to 1500 °C with Pt/pt. 13% Rodium thermocouple and compensating cable, one No. Ammeter, one No. voltmeter, indicating lamps, Air break magnetic contractor on 230 volts, single phase for thefirst two, size given below, while for the last size, operation on 400/440 volts 50 c/s. AC 3 phase  mains. Temperature Range: Maximum temperature upto 1500°C and recommended regular working Temp. not to exceed 1400 °C

• Features: Varied temperature range , Faster production , Noiseless operation , The maximum operating temperature is 1700° C .
• Applications: Metal industry , Chemical industry , Industrial and commercial use .
• Type Of Furnace: Fix
• Melting Material: Components
• Power Source: ElectricFeatures 

 400C, 500C Or 600C Operating Temperatures. ● 30, 60 & 120 Liter Capacities. ● 301 PID Controller With Ramp To Set Point Function. ● Heavy Duty Convection Fan For Good Uniformity. ● Low Thermal Mass Insulation For Energy Efficiency & Rapid Heating. ● Corrosion Resistant, Polished Stainless Steel Interior . ● 2 Multi-position Shelves. ● Suitable For Continuous Operation (see Options*) . ● Double Skin Construction For Cool Safe Outer Case . ● Hard Wearing, Zinc Coated & Stoved Epoxy Polyester Coated Exterior

• Melting Material: Silica Carbide
• Power Source: Electric
• Type Of Furnace: Fix
• Rated Power: 4 - 12 KW
• Input Voltage: 230V - 415 V
• Automation Grade: Semi-Automatic
• Brand Name: Globolytics
• Max OperatingTemperature: 900 to 1400 degree C

We are one of the leading manufacturers of High Temperature of Muffle Furnaces in India. We can do all types of Muffle furnaces such as High temperature, Low temperature and Ovens. We can Test certificate for this furnace and ovens if required.

Lint Free Wipes, Laboratory Vortex Mixer, Laboratory Glove Box

Bogie Hearth Furnace, Continuous Mesh Belt Furnace, Heat Treatment Furnaces

High Temperature Oven, Temperature Transducer, high voltage meter

Sensor & Temperature Controllers, Autonics Temperature Controller

Industrial Furnace, rotary hearth furnace, Bell Type Furnace

non-ferrous melting furnaces, Loading Tray Furnace, Crystal Growth Furnaces

Stainless Steel Fan Heaters, heater element, Industrial Hot Water Heater

High Temperature Ovens