Hindustan Hydraulics & Pneumatics George Town, Chennai, Tamil Nadu

Long strokes Ideal for holding large-size workpieces that have dimensional variances. The double pistons provide a large amount of gripping force. Built-in dust-protection mechanism

Can cool high temperature compressed air from compressors down to 40°C or less and efficiently remove moisture from the air. Stable operation is possible even in an environment with a high temperature, high moisture and heavy foreign particles for this water cooled type.

Vertical suction filters are designed for installation between the pump and reservoir tank. Their main function is to protect the pump. Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-□□H).

Can restrict the reduction of vacuum pressure even when there is no workpiece. No need for switching operation when changing workpieces Built-in filter (40 μm) With One-touch fitting type available !    

A variety of models accommodate a wide range of applications. Pad shapes: Flat, Flat with ribs, Thin flat, Thin flat with ribs, Deep, and Bellows shape Pad diameters: ø2 to ø50

Vacuum Pad with Ejector ZHP       Ejector and pad are integrated. Space saving and reduced piping labor! Two-stage ejector Suction flow rate 50% increased, Air consumption 30% reduced. Easier maintenance Mounting with the lock plate reduces the pad replacement work steps! Pad Diameter: Ø63, Ø80  

Valves and switches are unitized. Adaptable for manifold application Maximum absorption flow rate is increased by 40%. Maximum vacuum pressure –84 kPa    

Compact size without taking up space. Easy installment just by putting tube reel.

7 mm width compact solenoid valve manifold Weight of valve alone: 5 g Single unit specifications, base mounted manifold, body ported manifold can be selected. Manifold type No.: SS073

Thermo-dryer with Air Temp.Adjustment IDH   Stable supply of temperature and pressure controlled dry clean air. Possible to supply compressed air with the same conditions and quality regardless of the season. Application example: Supplying compressed air with constant conditions to air bearings mounted on the tool. Built-in filter Nominal filtration: 0.01 μm (99.9% filtration efficiency) Outlet oil mist concentration: Max. 0.01 mg/m3 (ANR) Outlet cleanliness: Particles of 0.3 μm or more: 3.5 particles/L (ANR) or less Power supply available all over the world Single-phase 100 VAC, 200 VAC, 230 VAC (50/60 Hz).  

Large energy saving by triple control! Power consumption: 33% Energy saving Compact/Lightweight 32 kg (100 VAC) Maintenance free: Magnet pump Low-noise design: 55dB (A)

Prevents collected dust from falling into the tank. No need to replace flushing oil. Easy maintenance and no air mixing. Integrates a lubrication port strainer, suction filter, and air breather. Possible to detect clogging with the differential pressure indicator and differential pressure indication switch (CB-□□H).    

SUMMARY ・Possible to select a cylinder corresponding to needs from a wide range 　of models. Realizes the labor saving and automation of conveyor lines. ・With auto switch (Series RSDQ: RSDQ, Series RSDG: RSDG)    

Type: Float Type Steam Trap            Thermodynamics Steam Trap            Bucket Type Steam Trap Body: WCB, CF8, C.I. Ends: Screwed End, Socket Weld.  

Size : 1/2" (15 mm) to 2” (50 mm).

  SS 304 Braided with Inner SS 316 Corrugated Flexible Hose   MAXIMUM WORKING PRESSURE 0 to 154Bar (0 to 2233PSI)   TEMPERATURE :-270OC to 700OC

SUMMARY Flow adjustable by flat head screwdriver. Prevention of an unnecessary manual operation.

Max. operating pressure: 1.0 MPa (at 20℃)

Clean Series LEFS Step Motor (Servo/24 VDC) Servo Motor (24 VDC) Max. work load: 60 kg Positioning repeatability: ±0.02 mm Compatible controllers: LECP6 LECA6 LECP1 LECPA LECPMJ

Air Gripper 2-Finger Type, Vertically compact, lightweight due to the wedge shaped cam construction. Ideal for operations which external force is applied to, such as press fitting operations. Repeatability: ±0.01 mm

Air Gripper 2-Finger Type, Vertically compact, lightweight due to the wedge shaped cam construction. Ideal for operations which external force is applied to, such as press fitting operations. Repeatability: ±0.01 mm

    Model No: PLS   Medium: Air, Water, Oil & Gas.   Type: Screwed End, Flange End.   Body: IC SS 304,316.   Pressure Adjusting Range: 0.5 To 10 kg/cm2.