Home Dehumidifier Dealers in Chennai

• Brand Name: BMC

The HFNC oxygen therapy is carried out using air \ oxygen blender ,active humidifier single heated tube and nasal cannula it is respiratory support. The HFNC continuous to increase easily set up it may also create positive pharyngeal pressure to reduce work of breathing the device midway classical oxygen delivery system like high concentrations CPAP generators .  It is designed a heated humifided mixture of air and oxygen at a high flow than the inspiratory flow. It adjust the flow rate and body weight provides a degree of distending pressure. It also decrease works of breathing and oxygenation . It utilizes a soft large bore nasal prongs it is similar to used on mechanical ventilator with the HFNC. It overcome the leading causes of discomfort seen with conventional oxygen therapy. It is a difficult quality level of PEEP generated by the high flow. It support breathing in people with acute heart failure , Acute respiratory distress syndrome.  It avoids rebreathing of co2 gas and therefore decreased anatomize dead space. It promoted a slow and deep breathing . it airway hydrated and it improved mucus clearance . This improves FRC and reduce work of breathing it flows used are high humidification is necessary to avoid drying of respiratory secretions and for maintaining nasal cilia function . It is mild positive airway pressure and lung volume recruitment.  It will titrate FIO2 and flow to promote comfort and oxygen saturation. It ensure the monitor spo2 saturation and pleth wave form. It ensure maintain a o2 saturation on NRB mask It delivery of optimally humidified and warm gases  It decreased body energy expenditure. It is used for intubation and extubation support as well as treatment and prevention of post operative respiratory failure and for oxygenation patients during trails or bronchoscopy.   Overview: H-80M Series High Flow Oxygen Cannula can be used for patients with spontaneous breathing, including artificial airway respiratory insufficiency, and can be used for patients in hospitals and long-term care institutions.  High Flow Oxygen Cannula can be used for patients with spontaneous breathing, including artificial airway respiratory insufficiency, and can be used for patients in hospitals and long-term care institutions. Provide a maximum of 80L / min air-oxygen mixed gas, oxygen concentration can be set automatically, providing an exclusive AutoFlow function, SmartFlow function. Disinfection-free design, Water chamber has a backflow prevention valve to prevent gas backflow.   Benefits: Advanced dual fan design, two levels of HFlow and LFlow Provide a maximum of 80L/min air/oxygen mixed gases, oxygen concentration can be set automatically 9-stage humidification temperature: 29℃-37℃, accurate to 1℃ Two levels of HFlow and LFlow, 2L/min~80L/min, can meet patients of most ages Comprehensive monitoring indexes: real-time monitoring of oxygen concentration, flow, temperature, respiratory rate, sPEEP. Innovative High Flow model AutoFlow TM Automatically set the output flow parameters based on the peak expiratory flow(PEF) of the patient, simplifying the setting steps, satisfying the treatment effect and improving patient comfort SmartFlow Follow the patient's every breath, switch the flow between breaths, provide a higher flow when inhaling, and a lower flow when exhaling, follow your every breath like a bi-level ventilator, comfortable and more economical oxygen resources. Hot standby function designed for convenient use and saving oxygen

Capable of operating in either invasive or non invasive control mode with flow detection. It can be used for invasive ventilation, non invasive ventilation and oxygen therapy for Adult Care It can be used for invasive ventilation, Infant Bubble CPAP, Resuscitation, and Oxygen therapy for Neonatal Care Designed for use in hospital environment wherever medical gas is being supplied to patients. nice 8050 heated wire humidifier incorporates latest technology that provides Physiological level of humidity at body temperature. The nice 8050 features dual servo control feedback system incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system. When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized. Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8050 will alert at variations of set temperature Vs actual. The design of nice 8050 makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator & Oxygen Therapy for Adult, Paediatric & Neonatal care. The nice 8050 accommodates both high and low flow ventilation therapies, as well as heated and non heated wire breathing system. The nice 8050 delivers precise, reliable performance. An advanced microprocessor controller assures the control of the system. The system responds immediately to any change in settings, and constant self diagnostic verify proper operation every second of use. High and low temperature protection is assured through out operation, including warmup and setting changes. if the delivery temperature exceed 41ºC independent circuitry shutdown all heating elements.

Located in Chennai(India), our organization is involved in catering to the market with a qualitative array of products. A quality certified product, Vadi Humidifier puts moisture back into the air and available in different technical specifications. We have a sound payment policy. Following it, we maintain transparency and only use methods that are safe, secure, and legal. Our clients can choose out of number of options as per convenience.

UFH 1 - Humidifier Polycarbonate bottle 300ml Chrome-plated brass or aluminium connections Autoclave: 120°C for up to 15 minutes. Storage temperature: (-40°C +/- 2°C) to (+60°C +/- 5°C) and 40 - 60% RH. Operating temperature: (-18°C +/- 2°C) to (50°C +/- 5°C). Max. applicable pressure value 500 KPa Max. applicable flow value: 20 l/min. 

• Capacity: 2400 cfm
• Power: 1 HP  
• MODEL: ST-ME 1004
• EVAPORATION: 40-60 LITERS PER HOUR
• SUPPLY: 440 V AC

• Country of Origin: Switzerland

Designed to specialize in critical aspects of patient care, the Hamilton-H900 humidifier aims at patient safety and easy usage as their focal point.Easy to use and simple two-step setup enables you to start quickly with a single breathing circuit set with all the connections, which empowers the healthcare workers with a single-handed operation

• Brand Name: Subzero
• Installation: Ceiling- or Wall-Mounted
• Model Type: Fog Type
• Humidification Capacity: 6L/Hr
• Frequency: 50 - 60 Hz
• Dimensions: 8L per Hr
• Nozzle: 2 Nozzle
• Humidification Performance: 11-20 lb/Hr
• Operating Pressure: 600-1070 PSI
• Operating Voltage: 24 V AC
• Power Input: 15 / 16 W

• Type: Humidifiers
• Certification: CE Certified, ISO 9001:2008
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 1Kw, 500W
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1yrs, 2yrs

Humidifiers work by making water vapor through a rapidly turning disk within the water of the humidifier. Because the vapor from the machine is not heated, there is no risk of raising temperature inside the cold room or place. Humidifiers are widely used in environment stability test chambers, humidity chambers. These devices are less likely to have a lot of mold and Vapor is made in these machines by using a heating element to cause steam. This method does not cause minerals to be dispersed in the air. So, tap water can often be used with these devices making them much less expensive to operate. Humidifiers play major role in certain industrial applications like Mushroom cultivation, Cold rooms, Dairy Industries, Food Industries, Vegetables and Flower Industries, Textile Plants, Agriculture , Floriculture, Tissue Culture, Fisheries, Automobiles, Agricultural Produce Storage Buildings

Servo Control Respiratory Humidifier Capable of operating in either invasive or non invasive control mode with flow detection. It can be used for invasive ventilation, non invasive ventilation and oxygen therapy for Adult Care. Designed for use in hospital environment wherever medical gas is being supplied to patients. The nice 8050 accommodates both high and low flow ventilation therapies, as well as heated and non heated wire breathing system.

• Country of Origin: Made in India
• Phase: Single Phase
• Power Consumption: 5.5 kW
• Power: 300 W
• Display Type: Digital
• Power Source: Electric
• Voltage: 210 V
• Frequency: 50 Hz

Ultrasonic Humidifier 5 LtrHr Capacity, Energy Efficient Ripening Chamber Humidifier. From Comfort Technologies Low Price with High Quality, This is vibrations of these plates transform water into a fine mist Throw out with a fan

Temperature Controller, Temperature Controller, Humidity Data Logger

Humidifiers, Medical Gas Outlet, Pressure Probes, mini sockets

Air Humidifier, Dust Extraction System, fume extraction systems

Heated Respiratory Humidifier, Infant Radiant Warmer, led phototherapy system

Humidifiers, air conditioning systems, Air Purifiers, Dehumidifiers

CPAP Machine Humidifier, Bair Hugger Full Body Blanket, BP Monitor

Sensor & Temperature Controllers, Autonics Temperature Controller

Humidifiers, Air pollution Control System, dust control equipment

Servo Control Respiratory Humidifier

bubble humidifier, oxygen pump, Bacterial Viral Filter, Arterial Line Filter

Humidifiers, Jade stone bed, jade stone projector, jade mattress

MR 850 Humidifier

respiratory humidifier, respiration monitor

respiratory humidifier