Humidity Chamber Dealers in Chennai

• Brand Name: sandy scientific
• Model Number: sandy5004
• Material: customer scope ms or Ss chamber

Humidity Chamber With cooling and without cooling :Construction : Double walled construction, interior made of thick gauge stainless steel sheets and exterior made of cold rolled mild steel sheets finished in powder coat. Inner space in between the walls is packed with special grade glass wool. The door is double walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height. Humidity is controlled by a humidistat humidity controller, having range 35% to 100% but humidity can be obtained from atmospheric humidity of 95% with sensitivity of +/- 3%.Temperature controlled by digital temperature controller from ambient +5ºC to 60ºC with an accuracy of +/- 1ºC. Heater and blower are fitted in the rear side of the above ambient temperature. For archiving below ambient temperature evaporator coils, compressor, condenser, and fan motor are provided. Humidity is attained by the mist of water that is circulated inside the chamber for maintaining 40% to 95% humidity. A water reservoir will be provided with back side of top side and water boiling tank down side of the chamber. Compact control panel with switches, indicating lamps, temperature controllers are fixed at the sides of the chamber for operational convenience. Chamber Size( Outer Ms and inner SS) : 450*450*600mm 605 * 605 * 605 mm 605 * 605 * 910 mm Optional Accessories for the above humidity chamber extra cost : Digital Humidistat controller cum-indicator having percentage 0% -to 95%   Digital Timer

Humidity chamber with temperature control we are offering wide range of qualitative humidity chamber, these are known for its durability and high performance. These are highly in demand among our client.these stability chambers are widely appreciated for their silent features like reliable performance, easy installation, low maintenance, efficiency.

Autoclavable low compressible volume humidifying chamber. Chamber compressible Volume for high flow 360ml. Maximum water capacity 230ml. 360 deg viewable water line for ease to monitor the water level from all angles. Highly durable intended for multiple usages. Withstands prolonged exposures to high temperature and repeated sterilization. Water fill port for refilling water during operation. Bio-compatible material minimizes risk on patient with safer material. Burn-free design minimizes risk of accidental burn

• Temperature Range: 5 to 50 Deg. C
• Display: LED
• Temperature Sensor: RTD
• Temperature Sensitivity: 0.1 Deg. C
• Material: Inner SS outer MS with powder coated paint
• Driven Type: Electric
• Color: Blue
• Condition: New

humidity chamber with refrigeration with microprocessor based pid controlled digital humidity & temperature indicating cum controller (compound) control panel:  attached (right side of the humidity chamber) control panel with the following necessary temp. & humidity control & electrical accessories:- ø  panel indicating lamp                                                                                                  1 no. ø  rocker switch for mains on/off                                                                                1 no. ø  rocker switch for cooling on/off                                                                             1 no. ø  rocker switch for heating on/off                                                                             1 no. ø  rocker switch for humidity on/off                                                                          1 no. ø  rocker switch for illumination on/off                                                                      1 no. ø  solid state relay (for cooling, heating & humidity control) each one no.            3 nos. øglass fuse for temp. humidity controller                                                                  1 no. ødigital volt meter                                                                                                       1 no.    power supply:     suitable   to work    on 220/230 volt, single phase, 50 hz. ac model tsi/hc-4c tsi/hc-6c tsi/hc-10c          tsi/hc-12c tsi/hc-15 working chamber size (mm) 455 x 610 x 410 505 x 830 x 415 565 x 865 x 550 650 x 900 x 580 700 x 900 x 650 load 300 w 400 w 500 w 600 w 750 w no. of trays 2 2 3 3 3 volume 100 ltrs 165 ltrs 215 ltrs 250 ltrs 325 ltrs

• Brand Name: TSI
• Country of Origin: Made in India
• Humidity range: 30% to 95% RH at 30 deg C to 60 deg C
• Controller: Eurotherm / PPI
• Trays: Adjustable SS mesh tray
• Insulation: PUF
• Sensor: PT-100,RTD,Class A/ Capacitive type RH sensor
• Controlling Accuracy: +/-1 deg C & +/-3% RH
• Control System: Wet and Dry bulb / Direct detective type
• Alarm: Temperature deviation
• Outer: MS with powder coated / SS 304
• Inner: SS 304
• Compressor: Emerson / Danfoss
• Refrigerant: CFC Free
• Condenser: Fin and Tube type
• Uniformity: Forced air circulation using electrical fan
• Sample Visibility: Vacuum glass will be in door
• Mobility: Heavy duty castor wheels
• Power Supply: 230 V,Single Phase,50 Hz
• Pay Mode Terms: T/T (Bank Transfer)

• Power: 230V &110V
• Color: Blue
• Material: Stainless Steel
• Usage: Environmental Purpose
• Compressor: AC Compressor

Details : Humidity Chamber powered by Meditech Technology for safe testing of specimens Touch Screen and PLC based controller Inbuilt USB and Data logger Stability testing for Pharmacy, Drugs, tablets, Cosmetic, Food, Beverages 21 CFR Part 11 Ready Software ICH Guideline Q1AR2 of real-time,intermediate,accelerated & semi-permeable study conditions

Technico Humidity Test chamber is a double walled chamber. The inner chamber is made up of 304 stainless steel material with mirror finish. The outer wall is made of mild steel with powder coating finish or alternatively stainless steel 304 with or without epoxy powder coating finish for excellent looks. The chamber is provided with a doubled walled door with a toughened glass viewing window which allows inspection of samples without disturbing the temperature inside the chamber. The door is mounted on heavy duty plate hinges with effective locking arrangement & seal against atmospheric infiltration by resilient magnet gasket. A second door made of clear Acrylic will be provided mounted on SS hinges and with magnetic catch to enable full visibility of the inner chamber keeping minimum loss of the test process conditions. The inner space in between the inner and outer wall is insulated and tightly packed with PUF to ensure effective thermal sealing. Heating elements are made from imported nichrome wires evenly distributed at the back side of the chamber. Forced air circulation fan assembly is incorporating heavy duty sealed CFC free compressor of Emerson compressor of emersion cope land make having condenser reservoir, cooling fan assembly and filled with suitable Refrigerant gas which will be circulated throughout the inner chamber for effective uniform temperature upto 20 deg. C. Cooling system is provided of the bottom portion of the chamber. The RH / Humidity can be controlled from 45 % RH to 95 % RH in the temperature range of 20 to 60 degs C. The RH is control within the range by a smart Microprocessor base PID controller with RH sensor. Technical Specification:  No. trays : 2 or 3   MOC of Trays : SS 304   Temp. controller : Microprocessor based PID type   RH Controller : Microprocessor based PID type   PT 100 sensor for temperature sensing.   Power supply : 230 V AC, single phase   Temperature Range : 15 to 60 degs C ± 1 degs C   Humidity Range : 45 % to 95 % ± 3% RH   Temp.range for RH operation : 20 to 60 Degs C only   Options: Timer, voltage stabilizer, Programmable controller, Recorder, PC interface small & bigger sizes also available based on request.   Standard Chamber size (L ) x ( W) x (H) mm Power Rating kw 455 x 455 x 710 3.0 605 x 605 x 605 4.5 605 x 605 x 910 4.5    

Sturdy double walled construction, interior made of thick gauge stainless steel sheet and exterior made of cold rolled mild steel sheets finished in powder coat. Inter spaced in between the walls is tightly packed with special grade glass woo. The door is double walled having toughened glass window and seals against atmospheric infiltration by resilient asbestos and rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height.

• Features: Dimensionally accurate, Superior quality, Less maintenance

Widely used for scientific application. The outer chamber manufactured using mild steel is powder coated, while the inner chamber is made of aluminum and stainless steel sheet.

SRICO Humidity Chamber – for use from ambient to 60’C. Triple walled construction with forced air circulation system, insulation is of 75mm thick glasswool, inside walls made out of aluminium/stainless steel as desired. Middle walls are of stainless steel/aluminium, outside walls are of mild steel finished in attractive DUCO shell white/powder coated. The unit is mounted on caster wheels for wheels for ease of mobility. The door is massive construction having glass viewing window and seals against atmosphere infiltration by resilient asbestos and rubber gasket. Humidity is controlled by imported Humidistat having range 0 to 100%; humidity can be obtained from atmospheric humidity to 97% with sensitivity of +/-3% fitted inside the chamber. Separate water tank has been provided at the lower/vertical side of the cabinet. Humidification is by steam vapours. Heating is accomplished ny the aid of 80/20 Nichrome elements made out of imported wire. Temperature is controlled by imported capillary Thermostat from a five degree above room temperature to 60’C with an accuracy of +/-1’C. Individual neon lamps and switches have been provided at the bottom side of the chamber which can be used individually according to requirements. The wet and dry temperatures are recorded from the thermometer supplied along with he equipment complete with plug and cord for operation on 220/230 VAC 50 cycles.   Chamber Size: (in - mm) Height    X   Width   X   Depth   710      X    455     X    455   605      X    605     X    605   910      X    605     X    605 SRICO Humidity chamber (with cooling) contruction is same as above as above but with cooling arrangement for use from temperature 5’C to 60’C. Chamber size is as mentioned above. Optional Suitable For Both Model:     1. Microprocessor based digital temperature monitoring system with built-in printer     2. Digital Temp. Indicating cum controller with direct reading humidity percentage indicator at extra cost.     3. Digital Timer 0-999 min./0-999 hr. with thumble setting and alarm.     4. Lighting system by 3 nos. fluorescent tubes of 20 watts fitted with back wall.     5. Energy meter (Digital).     6. Voltage Stabilizer.

• capacity: 230ml.

Autoclavable low compressible volume humidifying chamber. Chamber compressible Volume for high flow 360ml. Maximum water capacity 230ml. 360 deg viewable water line for ease to monitor the water level from all angles. Highly durable intended for multiple usages. Withstands prolonged exposures to high temperature and repeated sterilization. Water fill port for refilling water during operation. Bio-compatible material minimizes risk on patient with safer material. Burn-free design minimizes risk of accidental burn

Rasci Heating Cooling Chamber outer fabrication of Mild steel with powder coated and Inner Fabrication of Stainless Steel .The RHCC are insulated with ceramic fiber mat to reduce the radiation Cool loss to Minimum This is suitable for Low Temperature Process Testing application. High accuracy temperature controller With Tyristor Contactor based control circuit. The RHCC Cooled by High Quality Compressor and Maintain Temperature use Heater .Insulation with high quality superior quality Insulator. The temperature inside is maintained any desired level with in the operating range by a digital automatic temperature controller and Mp based high accuracy customized controller

• Power Supply: 230 V AC, Single Phase.
• Temperature: ºCto 60 °C with an accuracy of ± 1 °C.
• No.Trays: 2 or 3
• MOC of Trays: SS 304
• Temp. Controller: Microprocessor based PID Type
• RH Controller: Microprocessor based PID Type
• Temperature Range: 15 to 60 Degs C ± 1 Degs C
• Humidity Range: 45% to 95%,± 3% RH
• Temp. Range for RH Operation: 20 to 60 Degs C Only.

Digiqual Laboratory Chamber made in Chennai providing best Laboratory Chambers like , Humidity Chamber, Hot and cold Chamber , Environmental Chamber , Battery Test Chamber and more.Digiqual Humidity Test Chamber is a double walled chamber. The inner chamber is made of 304 stainless steel material with mirror finish. The Outer wall is made of Mild Steel with Powder coating finish or alternatively Stainless steel 304 with or without epoxy powder coating finish for excellent looks.

• Color: required
• rh: 10%to 98%
• temperature: -70°C to 200°C & 40% to 98% RH at 30-60°C 0.1°C 1%±1°C ±3% RH

We are offering humidity chamber. These test chambers are manufactured from superior grade components sourced from reliable vendors of the market as per the set industry norms. The entire range of humidity test chambers is highly admired for smooth operation, high strength, low running cost and longer functional life. The offered chambers are available in different capacities to meet the diverse needs of the clients. Temperature range : (-70 °c to + 400°c) humidity chambers are an enclosure in which the humidity is maintained at a constant, often high level. It is useful for keeping experimental samples or materials moist or at predetermined moisture content. Specifications: description humidity range display resolution control accuracy humidity chamber 40% to 98% rh at 30-60°c 1% 0.1°c ±3% rh ±1°c note: customer requirement size also available.

• Type: Humidity Test Chambers
• Certification: ISO 9001:2008
• Voltage: 110V, 220V
• Condition: New
• Application: Temperture Humidity Testing
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1year

We are the main supplier of this product.

• Usage/Application: Industrial
• Brand: Hot King Instruments Company
• Material: SS
• Finishing: Polished
• Power Supply: Electric
• Frequency: 50 Hz

• Brand Name: Unicool Technologies
• Usage/Application: Laboratory , R& D Labs & Pharma Industries
• Automation Type: Automatic
• Relative Humidity: 30% to 90 %
• Storage Temperature: 4 Dec C to 50 Dec C
• Size: 8 x 8 x 8 Feet (Also Customized)
• Power Supply: 230 V, 50 Hz

• Humidity range: 20% RH to 95% RH.
• Humidity range: 20% RH to 95% RH.
• Size : 18 inch X 18 inch x 24 inch*
• Material of construction: Inner bath
• Outer body: M.S
• Temperature range: 10ºC to 85ºC
• Compressor: CFC free.18 inch X 18 inch x 24 inch*
• Material of construction: Inner bath
• Outer body: M.S
• Temperature range: 10ºC to 85ºC
• Compressor: CFC free.

Autoclavable low compressible volume humidifying chamber. Chamber compressible Volume for high flow 360ml. Maximum water capacity 230ml. 360 deg viewable water line for ease to monitor the water level from all angles. Highly durable intended for multiple usages. Withstands prolonged exposures to high temperature and repeated sterilization. Water fill port for refilling water during operation. Bio-compatible material minimizes risk on patient with safer material. Burn-free design minimizes risk of accidental burn

 “MIGHTY INSTRUMENTS” Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and Humidity.  Optional   Accessories: Microprocessor Digital Controller with RTD SENSOR Digital humidistat controller cum indicator having percentage 0%-to 95% Digital timer

Rasci Heating Cooling Chamber outer fabrication of Mild steel with powder coated and Inner Fabrication of Stainless Steel .The RHCC are insulated with ceramic fiber mat to reduce the radiation Cool loss to Minimum This is suitable for Low Temperature Process Testing application. High accuracy temperature controller With Tyristor Contactor based control circuit.

Digital Microprocessor based, PID, Temperature Indicator cum controller with display resolution of 0.1°C. Digital Microprocessor based, PID, Humidity Indicator cum controller with display resolution of 1%Rh. (direct reading). Temperature controlling accuracy ±2°C. Humidity controlling accuracy of ±2 - 3% @ 40% to 98% Rh. Display accuracy ±0.5%, full scale. Class A grade, PT-100 Sensor (RTD) Construction: Vertical model. Inner Chamber made of dully polished Stainless Steel, 304 Grade, Outer made of Mild Steel, powder coated. Polyurethane Foam Insulation (PUF). Handle, lock and heavy-duty hinges for door. Door with Neoprene rubber gasket for leak proof. Forced air circulation to maintain uniformity of temperature. Frost Free Viewing Window to observe the testing components during working condition. Double walled full front opening door. Inner lined with SS. Long life Ni-chrome, SS heaters with fins for higher temperature. Automatic cut off for circulating fan when the door is opened Lockable Wheels for easy movement. Drain facility is provided to collect water, which is produced during humidity testing condition. Adjustable SS meshed trays. Refrigeration System: Single stage with hermetically sealed EMERSON Copeland make compressor. CFC free refrigerant filled. Fin and tube type air-cooled condenser.   Safety features: Provided with Suitable overload protectors and MCB s to ensure absolute safety to Electrical / Electronics and Refrigeration Systems. Provided with automatic water filling for humidity test. Door light is provided for viewing window. Single phase preventor will be provided for 3-phase instruments. High Pressure and Low Pressure safety cut off for Compressors. Fully solid-state relay (SSR) control for heaters. High and Low temperature deviation alarms.    Power Supply: Single-phase 230Volt / Three phase 440 Volt, 50 Hz. Optional: Calibration certificate traceability to NABL standards (Temperature controller with sensor). Tower Light with Red, Orange & Green indication to know the status of the machine. Provided with Specimen Protection to protect Components from high temperatures. With multi Programmable, cyclic Eurotherm PID controller with ramp and soak. IR lamps facility provided for component surface testing. Full Stainless steel (Inner & Outer) . Computer Interface (RS232 / 485). Available in different chamber sizes as per customer’s requirements. Note: Due to continuous development SSLIPL reserves the rights to change specifications without prior notice.  

Rasci Heating Cooling Chamber outer fabrication of Mild steel with powder coated and Inner Fabrication of Stainless Steel .The RHCC are insulated with ceramic fiber mat to reduce the radiation Cool loss to Minimum This is suitable for Low Temperature Process Testing application. High accuracy temperature controller With Tyristor Contactor based control circuit. The RHCC Cooled by High Quality Compressor and Maintain Temperature use Heater .Insulation with high quality superior quality Insulator. The temperature inside is maintained any desired level with in the operating range by a digital automatic temperature controller and Mp based high accuracy customized controller

Sgs lab instruments - we take pleasure in introducing ourselves as a renowned manufacturer and supplier of a wide variety of humidity chamber in india.

Humidity Test Chambers, dry block temperature calibrator

Humidity Cabinet, tablet dissolution apparatus

Humidity Cabinet, Salt Spray Chambers, Tray Dryer, Autoclave

Laboratory Equipment, Vacuum Oven, Bod Incubator, Salt Spray Test Apparatus

Humidity Chambers, Autoclaves, Furnaces, hydro generators, Ovens