HVAC System Dealers in A Nagar, Chennai

• Material: Any
• Condition: New
• Features: Sturdy design, Easy to install, Require less maintenance

The Air ducts Snorkels are manufactured as per customer specifications using Blow Roto molding process. These are designed to produce a cold air induction effect that increases power and torque thereby improving Fuel efficiency & economy.

We offer a wide range of sewage water diffuser. These are utilized in sewage treatmentetp. Float diffusers are made use in more stp and etp.the system consists of 2 number of imported taiwan make plastic floats, ss frame and aerotube gridgrids. We can use grids with any number of aerotubes according to our requirement. Each meter aerotube will give 5 m3 air. The system can be put on the top of effluent. Braided oze can be used from the blower to the grid. There is no need to spend for separate plumbing, construction of structures, design charges etc. The float system size is 1 meter x 1.5 meter. It is compact and will fit into even a small tank. Multiples of floats can be used in larger tanks. The blower can be kept at the bank of the tank or even on the frame it can be mounted. The bod and cod levels are maintained as required. The cost to get 100 m3 or 130 m3 of air is very much low and economical.the cost will come only half of the cost of common diffusers. The workers need not touch the effluent on repair or replacement of the system. The tank need not be emptied while working. More over the float can be bought to any corner of the tank with nylon ropes.(image a float in a leather affluent). Float diffuser specially designed for etpstp. features: can increase air flow in the same system just by increasing no of aerotubes low cost mechanism superior mixing capabilities reduced energy consumption can result in up to 50% electrical savings. no need for separate plumbing or civil work no hidden cost of designing charges high oxygen transfer specifications: type of aero tube microporous tube size od 25.4 mm; id 12.6 mm; moc of aero tube car tyre rubber and pe moc of aero tube clamps ss304 moc of nipple pvc operating temperature of aero tube 70 effective area of aerotube 0.078 m2 area of influence zone 1 m2 optimum through put 5 cubic meters per hour per meter tubing minimum through put 0.5 cubic meters per hour per meter tubing maximum through put 8.5 cubic meters per hour per meter tubing maximum allowable pressure 5 kgcm2 make colorite plastic usa standard oxygen transfer rate 4.2 kg o2.

• Material: GI / Aluminium / SS
• Diameter: 100 Mm To 2000 Mm
• Thickness: 0.5 Mm To 1.25 Mm
• Brand Name: Seven Star

Seven Star also manufactures spiral ducting  which is entirely machine-made. All fittings are also factory manufactured using specialised equipment, such as plasma cutters and various locking machines. Seven Star ducting systems have been found to pass duct leakage tests conducted as per SMACNA or DW-144 procedures. Value added services such as external painting, insulation, extra ribs for additional rigidity, cutting of collars for grille fixing etc. can be provided.   Fittings     :   all standard fittings, factory made using specialised machinery

• Type: Single Skin
• Brand Name: Hybrid
• Country of Origin: Made in India
• Weight: 90
• Voltage: 440 Volt
• Usage/Application: Industrial
• Capacity: 5000 cfm to 45000 com
• Material: Aluminium
• Installation Type: Floor Mounted
• Body Material: Aluminium
• Phase: Three Phase
• Frequency: 50 Hz
• cooling capacity: 13 kw to 776 kw

Wad Sprial Duct is fabricated from steel strips helicoidically wound and seamed with a four ply lockseam which gives the pipe added rigidity .The seam is outside the pipe wall leaving the inside free of obstruction for an optimized air flow...

Industrial Fans India offers a complete range of heavy-duty butterfly and louver dampers to meet your requirements. We have installed butterfly dampers as small as 100 mm diameter to as large as 3100mm diameter and louver damper of maximum size 3750mm height x 16000 mm wide. Our dampers are working in some of the harshest environments where abrasion, corrosion and heavy dust loading are prevalent. Butterfly dampers are not as precise as louver dampers for flow control but can be used for modulation when precise control is not critical. For more accurate flow control applications, multi-blade louver dampers, radial vane damper can be used. Simple louver dampers, double louver dampers and tandem louver dampers are used for shutting off and regulating flue gas flows. These are designed in circular or rectangular form according to the requirement.

We are well known for manufacturing and supplying of wide variety of Filter Press Vacuum Filter.

Single Skin Air Handling Units are designed and engineered with filter section, blower section, cooling section, heating section has per customer requirements. The total unit fabricated from superior quality galvanized steel sheet with powder coated paint finish. The unit is of the frame and panel type construction which allows all access panels to be opened or closed without affecting the structure of the unit. Liberally sized filters are constructed in filter section for worst environment dust conditions will capture major dust particles. The filter configurations with 20,10,5 micron pre filters and 3 micron main filters are available with cassette type, flange type, bag filter types.

The Function Of Industrial Ducting   1. To Remove Hazardous Gases, Fumes, Fog, Dust, Heat, & Unwanted Gases 2. To Maintain Fresh & Clean Environment . 3. To Increase Human Efficiency & Remove Human Fatigue. It Is Now Necessary To Make Green Surrounding to maintain our EARTH GREEN.   Chennai Exhaust Air System specialise in their fields and execute their works with their confidence. We make Kitchen Exhaust Systems ,M.S Exhaust Blower, Exhaust Fans, Exhaust Hood , Fresh Air System, Air Handling Unit, Grills, Micron Filters, Hefa Filters, Air Washer System, M.S Blowers, (S.S, Aluminium GI), G.I Ducting,Openable & Closed Oil Filters and many more.

Dyrocon Butterfly dampers provide a simple & cost effective method of control and isolation. Stainless steel dampers for high temperature applications are available in a variety of sizes. Various sealing arrangementscan be used to provide the correct efficiency for your application.Sealing efficiency can be increased to 100% with the addition of twin seals and a sealing air fan. Butterfly dampers can be actuated pneumatically, electrically or manually by a simple hand lever or reduction gearbox. Key Features:• Louver damper• Butterfly damper• Emergency shut off dampers• Double louver dampers with sealing air feature• Guillotine damper with double cable drive• Guillotine Isolator with rack and pinion drive• Guillotine Isolator with sealing air feature• Diverter dampers• Flap isolators• Stack dampers• Toggle disc shut off valve• DTPA valves• Dampers are supplied with Electrical, pneumatic and hydraulic actuators as per customer needs.• Expansion joints• Rotary air locks• Double flap valves• Screw operated slide gate• PIN gate

• Usage: Industrial
• Material of construction: Stainless steel

• Condition: New
• Material: Aluminium Alloy
• Application: Door & Window
• Type: Shutters,Fixing and adjustable installation
• Louver Type: Stationary Louver, Industrial Louver
• Blade Thickness: 0.50mm, 0.47 mm
• Is It Adjustable: Non Adjustable

• Shape: Rectangular
• Usage/Application: Industrial
• Material: Stainless Steel
• Temperature: 482 Degree Celsius
• Finishing: Mirror Finished
• Thickness: 25 to 30 mm

• Features: Long life, High grade material, Smooth functioning .

Industrial Dampers are critical equipment in various places of the ducting system from the boiler to the chimney. They can be used for isolation or flow control. Different designs can be used to give 100% seal tightness for man-safe operations. Dampers are designed on the basis of: Design and Operating values of the medium temperature, pressure and flow rate Composition and nature of the medium flowing in the ductwork Dust content in the medium Special requirements with regard to installation Space availability etc. Each Damper is custom built to suit the application in question with regard to: The temperature ranging from -65°C to +1200°C Choice of material and composition Steel part and steel quality

• Features: Quality Testedm High performance, Low maintenance
• Appearance: Modern
• Size: 43*20 mm, 70*20 mm, 90*25 mm
•  :  

damper actuators, sensor, Thermostat, controllers

Pressure Relief Damper, portable chillers, glass safety film, cold plates

Ventilation Duct, Online Water Analyzer, Wind Energy System

hvac energy management systems, Building Automation Systems

Membrane Disc Diffusers, floating media, Mechanical Evaporators

We are well known for exporting of wide variety of ss pleated filters.

One of the leading best Fine Bubble Diffuser supplying company.

aluminium duct, AHU Erection Service, commercial construction service

ss pleated filters, spun filters, pp filters, Air Filter, Bag Filter

SS Duct, Ac Duct, hvac duct, aluminium duct, MS Duct

Rectangle, Spiral ducting & Air Distribution Works

Industrial Dampers, boilers spare parts, Gates, Suction Chamber

Control Valve, Control Panels