HVAC System Dealers in Adambakkam, Chennai

We are offering disc diffuser. Ring diffuser made up of aero tubes can be used in all the areas where disk diffusers are used. The diffuser can be joined to the header with 3/4 inch ss nipples. Thickness of disk diffuser membrane is only 1 mm while it is 6 mm in ring diffusers. Operating pressure up to 5 kg in aerotubes while it is .7 kg in membranes. Sotr 4.8 kg/hour in aerotube it is 2.7 kg in disk diffusers/tube diffusers. Circle or ring diffusers are fine bubble diffusers. This diffusers are fitted with one 90 cm aerotube. 45cm on the right and another 45 cm on the left side of the pvc pipe which is of 40 cm length. Both sides of the pvc pipe is closed with end caps. In the middle we have saddle or threaded pvc t. This saddle or threaded pvc t can be fitted with 3/4 inch ss nipple which is a standard one for all disk diffusers or tubular diffusers. From blower the pipe headers are fitted with saddles. Hence the ss nipple works as a connecting air link between headers and diffusers. The fine bubble aeration from the diffuser helps to control bod and cod. Each meter length of aerotube will give 5 m3 air/hour. technical datasheet: type of aero tube microporous tube size od 25.4 mm; id 12.6 mm; moc of aero tube car tyre rubber and pe moc of aero tube clamps ss304 moc of nipple pvc operating temperature of aero tube 70 effective area of aerotube 0.078 m2 area of influence zone 1 m2 optimum through put 5 cubic meters per hour per meter tubing minimum through put 0.5 cubic meters per hour per meter tubing maximum through put 8.5 cubic meters per hour per meter tubing maximum allowable pressure 5 kg/cm2 make colorite plastic usa standard oxygen transfer rate 4.2 kg o2/kw

SIZE : 1/2” to 12” Type : 2 way, 3 way Body/ Bonnet : ASTM A216 Gr. WCB/ ASTM A351 Gr. CF8/ CF8M Internals : SS 304/ SS 316 [Hard facing other material on Request] Gland Packing : Teflon/ Grafoil Trim Design : Contoured Parabolic/ Cage Guided/ Pressure Balanced Characteristic : Linear/ Equal Percentage/ On-off (quick opening) End connections : Flanged end ASME B16.5 CL 150/300/600 Pressure Rating : ASME B16.5 CL 150/300/600 Temperature : upto 450°C Leakage : ASME B16.104 Class V & VI for Soft seating/ Class IV for Metal to Metal. ACTUATOR DETAILS Actuator : Diaphragm & Multi Spring type, Air to open / Air to close as a standard Pneumatic Pressure : 1.44 to 2.44 Kg/cm2 Positioner Details Type : Smart / Electro Pneumatic/ Pneumatic Input Signal : HART/ 4 – 20 mA/ 3 – 15 Psi

The main and basuc  function of Volume Control Damper is to control the exhaust air quantity from individual Exhaust Hood as per requirement and balance the entire exhaust system to give maximum efficiency at individual requirement,   Chennai Exhaust Air System specialise in their fields and execute their works with their confidence. We make Kitchen Exhaust Systems ,M.S Exhaust Blower, Exhaust Fans, Exhaust Hood , Fresh Air System, Air Handling Unit, Grills, Micron Filters, Hefa Filters, Air Washer System, M.S Blowers, (S.S, Aluminium GI), G.I Ducting,Openable & Closed Oil Filters and many more.  

stainless steel duct, aluminium duct, Spiral Duct Insulation Service

We are one of the Distinguished Bus Ducts Manufacturers and Electric Bus Ducts Suppliers in India. We have Considerable Expertise in the Field of Different Types of Bus Ducts.

Stack Diffuser, Wall Mount Surface Skimmer

Air Conditioning Ducting, crane erection service, galvanized iron ducting

Damper Actuator, Thermostart Glow Plugs, Siemens actuator, Inline BTU Meter

Air Blower, roof exhaust fan, Paint Booth Filters, Ducting System, Scrubber

Bus Ducts, AMF Panels, LED Street Light, MCC Panels, PCC Panels

Bus Duct

Bus Duct

hvac panel, Oven Control Panel, PFC Capacitor, Automation Solution

Bus Ducts, All Kinds Of Metal Sheet Box, Jewelry Box

Ventilation Louver, Trapezoidal Profile, Corner Trim, Eave Gutter