HVAC System Dealers in Kotturpuram, Chennai

• Shape: Rectangular
• Usage/Application: Industrial
• Material: Stainless Steel
• Temperature: 482 Degree Celsius
• Finishing: Mirror Finished
• Thickness: 25 to 30 mm

Wad Sprial Duct is fabricated from steel strips helicoidically wound and seamed with a four ply lockseam which gives the pipe added rigidity .The seam is outside the pipe wall leaving the inside free of obstruction for an optimized air flow...

• Type: Single Skin
• Brand Name: Hybrid
• Country of Origin: Made in India
• Weight: 90
• Voltage: 440 Volt
• Usage/Application: Industrial
• Capacity: 5000 cfm to 45000 com
• Material: Aluminium
• Installation Type: Floor Mounted
• Body Material: Aluminium
• Phase: Three Phase
• Frequency: 50 Hz
• cooling capacity: 13 kw to 776 kw

SIZE : 1/2” to 12” Type : 2 way, 3 way Body/ Bonnet : ASTM A216 Gr. WCB/ ASTM A351 Gr. CF8/ CF8M Internals : SS 304/ SS 316 [Hard facing other material on Request] Gland Packing : Teflon/ Grafoil Trim Design : Contoured Parabolic/ Cage Guided/ Pressure Balanced Characteristic : Linear/ Equal Percentage/ On-off (quick opening) End connections : Flanged end ASME B16.5 CL 150/300/600 Pressure Rating : ASME B16.5 CL 150/300/600 Temperature : upto 450°C Leakage : ASME B16.104 Class V & VI for Soft seating/ Class IV for Metal to Metal. ACTUATOR DETAILS Actuator : Diaphragm & Multi Spring type, Air to open / Air to close as a standard Pneumatic Pressure : 1.44 to 2.44 Kg/cm2 Positioner Details Type : Smart / Electro Pneumatic/ Pneumatic Input Signal : HART/ 4 – 20 mA/ 3 – 15 Psi

We are offering disc diffuser. Ring diffuser made up of aero tubes can be used in all the areas where disk diffusers are used. The diffuser can be joined to the header with 3/4 inch ss nipples. Thickness of disk diffuser membrane is only 1 mm while it is 6 mm in ring diffusers. Operating pressure up to 5 kg in aerotubes while it is .7 kg in membranes. Sotr 4.8 kg/hour in aerotube it is 2.7 kg in disk diffusers/tube diffusers. Circle or ring diffusers are fine bubble diffusers. This diffusers are fitted with one 90 cm aerotube. 45cm on the right and another 45 cm on the left side of the pvc pipe which is of 40 cm length. Both sides of the pvc pipe is closed with end caps. In the middle we have saddle or threaded pvc t. This saddle or threaded pvc t can be fitted with 3/4 inch ss nipple which is a standard one for all disk diffusers or tubular diffusers. From blower the pipe headers are fitted with saddles. Hence the ss nipple works as a connecting air link between headers and diffusers. The fine bubble aeration from the diffuser helps to control bod and cod. Each meter length of aerotube will give 5 m3 air/hour. technical datasheet: type of aero tube microporous tube size od 25.4 mm; id 12.6 mm; moc of aero tube car tyre rubber and pe moc of aero tube clamps ss304 moc of nipple pvc operating temperature of aero tube 70 effective area of aerotube 0.078 m2 area of influence zone 1 m2 optimum through put 5 cubic meters per hour per meter tubing minimum through put 0.5 cubic meters per hour per meter tubing maximum through put 8.5 cubic meters per hour per meter tubing maximum allowable pressure 5 kg/cm2 make colorite plastic usa standard oxygen transfer rate 4.2 kg o2/kw

Seven Star also manufactures spiral ducting which is entirely machine-made. All fittings are also factory manufactured using specialised equipment, such as plasma cutters and various locking machines. Seven Star ducting systems have been found to pass duct leakage tests conducted as per SMACNA or DW-144 procedures. Value added services such as external painting, insulation, extra ribs for additional rigidity, cutting of collars for grille fixing etc. can be provided.

The Air ducts Snorkels are manufactured as per customer specifications using Blow Roto molding process. These are designed to produce a cold air induction effect that increases power and torque thereby improving Fuel efficiency & economy.

For Aerobic sewage treatment system and aquatics for supplying air tube breeding and culture pond. Light and compact, oil-less design. Low noise Low-power consumption(230V AC). Low running temperature, easy maintenance. Weather proof case IP 55. Unrivaled aeration, lifetime and performance. Enables continues operation for over 20,000 hours can run 24/7. No Grounding work required.

• Size: 5inch, 6inch, 7inch, 8inch
• Type: Fragrance Diffuser
• Material: Aluminum, Stainless Steel
• Shape: Oval, Rectangular, Round, Square
• Thickness: 1mm, 2mm, 3mm, 4mm, 5mm
• Application: Home, Hotel, Interior Decor
• Color: Black, Brown, Grey
• Feature: Dust Free, Heat Resistance, Light Weight, Nice Fragrance, Shiny Look
• Appearance: Antique, Common, Modern
• Finishing: Non Polished, Polished

Industrial Fans India offers a complete range of heavy-duty butterfly and louver dampers to meet your requirements. We have installed butterfly dampers as small as 100 mm diameter to as large as 3100mm diameter and louver damper of maximum size 3750mm height x 16000 mm wide. Our dampers are working in some of the harshest environments where abrasion, corrosion and heavy dust loading are prevalent. Butterfly dampers are not as precise as louver dampers for flow control but can be used for modulation when precise control is not critical. For more accurate flow control applications, multi-blade louver dampers, radial vane damper can be used. Simple louver dampers, double louver dampers and tandem louver dampers are used for shutting off and regulating flue gas flows. These are designed in circular or rectangular form according to the requirement.

• Material: Any
• Condition: New
• Features: Sturdy design, Easy to install, Require less maintenance

The main and basuc  function of Volume Control Damper is to control the exhaust air quantity from individual Exhaust Hood as per requirement and balance the entire exhaust system to give maximum efficiency at individual requirement,   Chennai Exhaust Air System specialise in their fields and execute their works with their confidence. We make Kitchen Exhaust Systems ,M.S Exhaust Blower, Exhaust Fans, Exhaust Hood , Fresh Air System, Air Handling Unit, Grills, Micron Filters, Hefa Filters, Air Washer System, M.S Blowers, (S.S, Aluminium GI), G.I Ducting,Openable & Closed Oil Filters and many more.  

damper actuators, sensor, Thermostat, controllers, Flow Meter

Dyrocon Butterfly dampers provide a simple & cost effective method of control and isolation. Stainless steel dampers for high temperature applications are available in a variety of sizes. Various sealing arrangementscan be used to provide the correct efficiency for your application.Sealing efficiency can be increased to 100% with the addition of twin seals and a sealing air fan. Butterfly dampers can be actuated pneumatically, electrically or manually by a simple hand lever or reduction gearbox. Key Features:• Louver damper• Butterfly damper• Emergency shut off dampers• Double louver dampers with sealing air feature• Guillotine damper with double cable drive• Guillotine Isolator with rack and pinion drive• Guillotine Isolator with sealing air feature• Diverter dampers• Flap isolators• Stack dampers• Toggle disc shut off valve• DTPA valves• Dampers are supplied with Electrical, pneumatic and hydraulic actuators as per customer needs.• Expansion joints• Rotary air locks• Double flap valves• Screw operated slide gate• PIN gate

Industrial Dampers are critical equipment in various places of the ducting system from the boiler to the chimney. They can be used for isolation or flow control. Different designs can be used to give 100% seal tightness for man-safe operations. Dampers are designed on the basis of: Design and Operating values of the medium temperature, pressure and flow rate Composition and nature of the medium flowing in the ductwork Dust content in the medium Special requirements with regard to installation Space availability etc. Each Damper is custom built to suit the application in question with regard to: The temperature ranging from -65°C to +1200°C Choice of material and composition Steel part and steel quality

• Condition: New
• Material: Aluminium Alloy
• Application: Door & Window
• Type: Shutters,Fixing and adjustable installation
• Louver Type: Stationary Louver, Industrial Louver
• Blade Thickness: 0.50mm, 0.47 mm
• Is It Adjustable: Non Adjustable

Single Skin Air Handling Units are designed and engineered with filter section, blower section, cooling section, heating section has per customer requirements. The total unit fabricated from superior quality galvanized steel sheet with powder coated paint finish. The unit is of the frame and panel type construction which allows all access panels to be opened or closed without affecting the structure of the unit. Liberally sized filters are constructed in filter section for worst environment dust conditions will capture major dust particles. The filter configurations with 20,10,5 micron pre filters and 3 micron main filters are available with cassette type, flange type, bag filter types.

• Structure: Ball
• Brand Name: valves
• Media: Water
• Port: chennai
• Temperature Of Media: Medium Temperature
• Power: Manual
• Pressure: Medium Pressure
• Place of Origin: Tamil Nadu, India

hvac energy management systems, Building Automation Systems

We are one of the Distinguished Bus Ducts Manufacturers and Electric Bus Ducts Suppliers in India. We have Considerable Expertise in the Field of Different Types of Bus Ducts.

aluminium duct, AHU Erection Service, Duct Erection Services

portable chillers, glass safety film, cold plates, Air Conditioning Parts

Y Strainer Valve, basket strainer valve, tee strainer valve

Bus Ducts, All Kinds Of Metal Sheet Box, Jewelry Box

SS Duct, Ac Duct, aluminium duct, MS Duct, TDF Duct

Axial Flow Fans, environmental control equipment

Gates, Suction Chamber

Gravimetric Feeders, volumetric feeders

Non-Metallic Expansion Joints

Bus Duct