Hydraulic Cylinder Accessories Dealers in Chennai

Located in Chennai(India), our organization is able to serve our regional as well as domestic marketplaces. We are backed by a reliable team of packaging professionals and modern facility that aid us completely for furnishing standard as well as tailored packaging requirements of the patrons.

EXTENDED DURABILITY IN TIGHT SPACES Telescopic cylinders feature a multi-stage rod built of a series of nested steel tubes of progressively smaller diameter. This special design of hydraulic cylinder provides exceptional travel from a highly compact retracted length. Typically the collapsed length of a telescopic cylinder is 20% to 40% of the fully extended length, depending on the number of stages. The ability to extend from a minimal retracted size makes Poorni Hydromacs Telescopic Cylinders ideal for applications where space constraints inhibit the use of conventional single-stage cylinders. SPECIFICATIONS: Bores: 2″ up to 30″ (50 mm to 762 mm) Strokes: 2′ or more to meet size and stroke requirements Sizes: Imperial or Metric Pressure: Up to 5,000 PSI (350 bar) Temperature: -60° F to 600° F (-50° C to 315° C) Material: Steel, Stainless steel, Special alloys Rod Material: Steel with hard chrome plating Type: Air or Hydraulic Rods are available in Stainless Steel or with CERAMAGTM Ceramic Rod Coating, Nickel/Chrome and other coatings upon request

We counted among the reputed Manufacturers, Exporters and Suppliers of Hydraulic Speed Control Check Cylinders. These Hydraulic Speed Control Check Cylinders are made from the best available materials and assure durability and long service life. Our Hydraulic Speed Control Check Cylinders are highly resistance. We avail these Hydraulic Speed Control Check Cylinders at affordable price range.

Design and manufacture either double acting or single acting ,pneumatic and hydraulic cylinders. We can supply in short period,we export cylinders.

• Material: Aluminum
• Color: Silver
• Condition: New
• Diameter: 40 to 45 mm
• Maximum Pressure: 3000 psi
• Maximum Stroke: 300 mm

Holding position of a prominent market leader, we are engaged in manufacturing & exporting High Pressure Cylinder. We source high grade quality steels from authentic vendor base to manufacture these cylinders in compliance with industrial standards. Ability to withstand high pressure range, these cylinders are broadly used to store different gases. Well-known among our clients due to their high storage capacity, durability and rust-proof finish, our High Pressure Cylinder finds usage in steel plants.

We are engaged in manufacturing and supplying of a wide range of Hydraulic Cylinder. Our products are widely appreciated for strength, durability, reliability and excellent performance. Designed and manufactured using latest technology, it is easy to operate and install, ensure flawless functioning and require very low maintenance. Features: High Performance High quality Easy to operate Affordable price Specification: Bore size: Ø32 – Ø400 mm Stroke: min 25 – 3000mm Working pressure: 10 bar to max 700 bar

• Material: Graphite
• Shape: Rectangular
• Brand Name: Airvac
• Application: Dry Vacuum Pumps
• Made in: India

Our company is one of the eminent Manufacturers and Suppliers of precision engineered Hydraulic Cylinders. We design the using the latest CAD technologies and make them from premium raw materials. Buyers can get Hydraulic Cylinders from us in varied specifications and ask for individually tailored solutions as well. We guarantee our Hydraulic Cylinders are reliable and will render long service.   Specifications : Cylinder data specifications Bore size from 32mm to 400mm Rod size from 18mm to 250mm Stroke upto 10m Pressure upto 300bar Welded type Hydraulic Cylinder Tie rod type hydraulic cylinder Mill Type Hydraulic cylinder

• sizes: 200mm and 250mm
• maximum operating pressure: 40 Kgf/cms.

GMT Hydraulic Rotating Cylinders are designed to work at maximum operating pressure of 40 Kgfcms. These cylinders are dynamically balanced and are capable of rotating at high speeds. GMT offers on request hydraulic rotating cylinders with safety non-return valve which maintains the clamping pressure in the event of an emergency caused by loss of hydraulic pressure or failure of hydraulic hose.

Horiuchi cylinders are high quality and high precision cylinder usually custom designed for specific requirements. Our cylinders are used by over 20,000 companies. (Ex - Automakers, Injection moulding machinery makers, Machine tool makers, Power generation plants, Shipyards, Ironworks, Earth-moving machinery makers, and so on)

• Country of Origin: India
• Loop Type: Close Loop
• Blade Material: Carbon Steel
• Brand Name: TAZAKIMO
• Rust Resistance: Yes
• Specialities: Durable, High Perfomance, Robustness, Excellent Strength

Carbon Flexback blades are a low cost alternative on easy to cut material.  Carbon Flexback blades have an excellent fatigue factor to give long saw blade life on bandsaws running at high speed, cutting non-ferrous metal, and wood.  Its flexible backer is also suitable for absorbing contour cutting stresses.   These bandsaw blades are made from a solid piece of carbon steel with a flexible back. Their teeth are heat treated to retain their sharp edge.

We are an eminent Exporter and Supplier of Pneumatic Cylinder. Our Pneumatic Cylinder variety ranges from stroke lengths, mounting styles and are greased with permanent lubricants. They may vary from the raw material used; aluminum, polyurethane, steel galvanized, steel, and stainless steel are just a few of them. Our Pneumatic Cylinders are compact in size and light in weight. They reduce end-position impact and vibrations when installed. Further, Pneumatic Cylinders can be made available in magnetic and Nonmagnetic versions.

We are offering hydraulic cylinders that is widely praised by clients all over the world. The hydraulic cylinders come with different types of mountings like front flange, rear flange, male and female clevis, trunion mounting. The hydraulic cylinders can be acquired at competitive prices by clients. specifications : bore size : 16 mm - 500 mmpressure : upto 400 bar with imported seals & tubeservicing of cylinders salient features : robust structurecorrosion resistanthigh performancehigh tensile strength.

• Country of Origin: India
• Type: Hydraulic Cylinder
• Material: Carbon Steel, Plastic, Stainless Steel, Aluminium
• Shape: Round
• Certification: ISI Certified
• Color: Black, Golden, Grey, Light Yellow, Silver
• Feature: Anti-corrosive, Construction Excellent, Easy To Operate, Optimum Finish, Require Low Maintenance, Sturdiness, Trouble Free Performance
• Condition: New
• Finishing: Polished
• Automatic Grade: Manual, Semi-Automatic
• Pressure: High Pressure, Low Pressure
• Standard: AISI, ASTM, BS, DIN, GB, JIS
• Structure: Series Cylinder
• Material: Carbon steel
• Shaft Diameter: 3500mm

• Material: Aluminium
• Shape: Cylindrical
• Application: Industrial
• Type: Hydro Pneumatic
• Color: Silver
• Brand Name: Esha
• Brand Name: Esha

• Material: Iron
• Automatic Grade: Automatic
• Brand Name: Ecoworld
• Capacity: 11-40 Ton
• Usage/Application: Hydraulic

120mm  chair hytrilick pump  having  2 colours. Black and steel coting Brand name: high Power hytrilick Warranty. 3 months 

As we are one of the leading manufacturers, exporters and suppliers of industrial products, we offer high quality Hydraulic Cylinder. Used to converts fluid power into linear mechanical force and motion, this device is highly demanded by clients. Also, these are used to convert fluid energy to an output force in a linear direction for executing different jobs. Our offered hydraulic cylinder is known for their high tensile strength, durability and their applications include pushing or pulling in engineering applications for machine tools, earth moving equipment, space applications and more.

Norgren offers three ranges of compact actuators; an ISO standard version, our Norgren standard equivalent and a clamping cylinder range. Enable high thrusts to be achieved in restricted space Neat, clean appearance One-piece body construction

• Material: Cast Iron
• Feature: Rust Free
• Usage/Application: Heavy Duty Vehicle Lifting
• Capacity: 10 Ton
• Max Pressure: 200 Bar

• Type: Single Acting
• Material: Aluminium
• Application: Automation
• Brand Name: Camozzi
• Media: Air
• Bore Size: 32 mm
• Dimension/Size: 320 MM
• Max Pressure: 8 Bar

• Feature: Less maintenance, Corrosion resistance, High durability

• Material: SS
• Structure: Cushioned Cylinder
• Brand: Festo
• Stroke: 20 mm
• Piston Diameter: 25 mm

• Maximum stroke:: 16 meters
• Shaft Diameter: 12-500 mm

In order to append and respond to the diverse requirements of esteemed clients, we are able to offer Large Bore & Stroke Hydraulic Cylinder. The offered range of large bore & stroke hydraulic cylinders is made utilizing high grade raw material and innovative technology in strict compliance with the international quality norms and standards. Along with this, the offered range is known for its sturdiness and durability.

A Mandril  hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. It has many applications, notably in construction equipment (engineering vehicles), manufacturing machinery, and civil engineering. Features: Longer service life High reliability Easy to use

We do supply of high pressure cylinder followed by design code of DOT 3T, ASME and other code heaving large and small size. Meterial of construction can be carbon steel, Mild steel, Stainless steel, Alloy steel

• Capacity:  Upto100 Tons
• Bore Diameter: 32mmto400 mm
• Stroke: Customized
• Max Pressure: 700kg/cm2

• Shape: Cylindrical
• Color: Silver
• Application: Industrial