Hydraulic Components Dealers in Ambattur, Chennai

Remote Control Gear Pullers, Self Propelled - Scissor Lift

• PUSHER DRIVE: Hydraulic
• OUTPUT Kg/Hr: 4000

The pusher centrifuge is a continuously operating filtration equipment. It consists of two rotating baskets as outer basket and inner basket and which are fitted with axially slotted sieves. Both the baskets together rotate at very high speed in order to induce desired centrifugal force. The inner stage basket reciprocates axially inside the outer basket while both are rotating at same speed.

Hydraulic Manifolds, plate connectors, hydraulic blocks, hydraulic elbows

• Country of Origin: Made in India
• Usage/Application: Industrial

• Type: Hand Tools

• Shape: Circular
• Material: ptfe 
• Color: Black
• Size: 10 Inches
• Usage/Application: Chemicals, Petrochemicals, Fertilizers, Food & Beverage, Pharmaceuticals

Pu Piston Seals, Coir Pith Machine, ptfe threads, Rod Seals, hydraulic spm

Piston seals are maintain sealing contact between the piston and the cylinder bore. Differential pressures acting on the piston to extend or retract the piston rod can be in excess of 400 bar (5 800 psi). The pressure acting on the piston seal increases contact forces between the piston seal and cylinder surface. Therefore, the surface properties of the sealing surfaces are critical to proper seal performance. Double-acting cylinders are the most widely used cylinder types. They operate with pressure on both sides and, therefore, require double-acting seal arrangements. Double-acting piston seals have a symmetrical profile (cross section) and identical sealing functions in both directions. Typically, double-acting piston seals consist of a slide ring and an energizer and an anti-extrusion ring. The deformation of the elastomeric energizer when installed provides adequate force to keep the slide ring in dynamic sealing contact with the cylinder bore, while sealing statically against the seal housing groove. A double-acting cylinder typically has the same fluid on both sides of the piston. Therefore, a relatively thick lubrication film can be permitted between the piston seal and the cylinder bore to minimize friction and wear. The transportation of fluid occurring during dynamic operation is, however, small and insignificant in most applications.

hydraulic track pin pusher, Giant Hydraulic Tyre Press, filter strap wrench

Diaphragm accumulator, Hydraulic Breaker, Telescopic Hydraulic Cylinder

Automobile Parts, ground parts, Hydraulic Equipment

Hydraulic Manifolds, 2 Way Solenoid Valve

Hydraulic Fitting

hydraulic piling machine spares

Rubber piston seals, Extruded Rubber Seals

hydraulic cylinder components, Port Nipples, Single Acting Pistons

bhp hammer, Forklift, compressors pistons, piston pin nut

Industrial Hydraulic Manifolds, hydraulic tube fittings

Steel Forgings, industrial die forgings