Industrial Blades Dealers in Chennai

Blessed and supported by the team of high talented and skilled personnel, our company is considered as one of the leading manufacturer, supplier, trader and exporter of multiple bottom knife that is demanded for paper, metal and tube cutting. Offered knife is designed with precision using optimum grade raw material at par with the defined international market parameters. This multiple bottom knife is widely demanded in various sizes, designs and shapes to satisfy our clients' defined requirements. Features: corrosion resistance excellent sharpness sturdy design excellent finish specification : manufactured from best suitable alloy steel in upto 450mm dia with zero run-out. Fine pitches upto 2.5 mm. These are available with single or double cutting edges. Suitable for high speed slitting due to perfect dynamic balancing.

• Brand Name: RUBENO

Band knives are a flat length of narrow steel you would mount onto a band-style cutting machine to slice, slit, or score material. A band knife’s cutting edge is designed to slice through material leaving minimal waste in the process.Band Knife blades are used on two types of machine (vertical and horizontal) depending on the material being cut.On a vertical band knife machine usually a narrow width band knife blade is used, the most common width being 10 mm. The length of the band knife blade depends on the supplier of the band knife machine. The dimensions are indicated on a small metal tag pasted or riveted on the machine. The vertical machine band knife blade is most commonly a "double bevel, double edge DBDE" execution to enable cutting while advancing the table and also while retracting the work table, while as the "double bevel, single edge DBSE" execution cuts only in one direction. Productivity is enhanced when the operator cuts both while advancing and also while retracting the work table after adjusting the foam block after each pass for cutting. The DBDE execution blade can have a parallel or twisted 180 degrees welding. The twisted welding execution saves a grinding unit, as both edges pass the same grinding unit after two turns. It has been observed that a narrow width on a vertical band knife machine gives better dimensional accuracies on the foam block. The wider the vertical machine band knife - more the deflection and size variation from one end to the other extreme end.Horizontal band knife blades are wider usually 30-60 mm wide for foam converting is popular, for leather goods 40-50 mm wide blade is popular, 85-110 mm width is popular for the tannery splitting band knife. There are other widths depending on the machine manufacturer. The horizontal machine band knife blade is supported by a guide to give dimensional accuracies while cutting/splitting. Therefore, only blades that have passed as one main manufacturing step a surface grinding process reach the necessary thickness tolerances of less than 0.02 mm. A higher tolerance would lead to marks on the surface of the split material like leather or rubber. Blades are available in different grades of exactness depending on the required exactness on the material to be cut/split. On modern machines in combination with a high grade blade a splitting thickness of 0.2 mm for 1500 mm material width is possible.

• Blade Material: Imported Alloy Steel
• Blade Finishing: Polished
• Packaging Type: Packaging Box
• Usage: Industrial
• Precision: +-0.005mm

These Cutters are specially manufactured and designed from Imported alloy Steel which are imported from Japan.

These knives are used in Book manufacturing units and used to cut or trim all the three sides of the book. These alloy steel knives are manufactured with tungsten steel imported from Europe. Knives are available in ready stock for Popular machines like Muller Martini, Wohlenberg, Perfecta etc

FASTER CUTTING WITH M-42 HIGH SPEED STEEL TOOTH EDGE Runs at twice the speed of carbon blades for faster, easier cuttingLONGER BLADE LIFE Lasts 10 times longer than carbon bladesFOR GENERAL PURPOSE HAND-FED APPLICATIONSTool and die shops, machine shops, maintenance facilities

altin coating for productivity and long blade life aluminum, titanium, and nitrogen combine to form a coating that is hard and tough, protecting each tooth from heat and wear with an armor-like barrier unique, patented tooth profilespecial, reinforced tooth design for reduced tooth strip page at higher feed rates minimized harmonics and vibrations quiet cutting high performance backing steelfor longer fatigue life.

  Slitting saws from 30mm to 400mm Dia can be supplied with different locking arrangements, with or without segments.  Thin  slitting saws are normally recommended for reducing wastage of costly material. Burr relieving strips ensures smooth surface  finish of the cutting surface. Grit size will be chosen depending on the nature and thickness of the cutting material.

• Type: Normal Sewing  
• Features: Easy to install, Fine finish, Rust proof, optimum strength, robustness and dimensional accuracy.
• Usage/Application: KNife 

• Brand Name: Hakansson
• Packaging Type: Box
• Finishing: Sandblasted
• Type: Saw Blade
• Application: Industrial
• Material: HSS

• Shape: RECTANGULAR
• Material: Stainless Steel
• Dimension (LxWxT): 3760mm*34mm*1.1mm

• Material: Mild steel
• Brand Name: Win Win
• Shape: Round
• Usage: Industrial
• Surface treatment: Polished
• Payment Terms: NEFT RTGS CASH

• Blade Material: SW-MS
• Brand Name: ALFA Bimetal Bandsaw
• Application: Industrial
• I deal in: New Only
•  :  

Available in different length, width, thickness & TPI   Band saw blades can be cut and welded to any length. When ordering band saw blades you need to supply the following information:   Kind of blade materlal (Bi- Metal, Hardback, Flexback) Length of blade Width of blade Tooth pitch (Teeth per Inch)   Neither the number of teeth per inch, set or style affect the price. Only the type of material, length and width determine price.   A finer tpi will give longer blade life. For bundles, select a tpi one step coarser than appropriate for the single unit. TPI must be correct for hard to cut materials else the blade life will be shortened. Finer TPI gives better finish  

• Material: Bimetal & Carbide tipped
• Brand: LENOX - USA
• Usage/Application: Industrial

• Material: Mild Steel
• Usage/Application: CNC Machine
• Finishing: Powder Coated
• Size: 4 Inch
• Shape: Round
• Corrosion Resistance: Yes

Band Knife Blades available for all the machine manufactured world wide, in thefollowing shape and dimension. Band Knife Blades available for all the machine manufactured world wide Knife Edge Concave & Convex

• Material: H & T
• Brand Name: WINTECH
• Size: DIA 110mm
• Features: Robust construction , Excellent cutting efficien , Easy to use,cy

• Features: Smooth performance, Longer operational life, Require less maintenance

HIGH PERFORMANCE CARBIDE AND SPECIAL GROUND TOOTH FORM Superior wear resistance when sawing difficult to cut materials HIGH PERFORMANCE BACKING STEEL Excellent fatigue life

band knives, shoe sewing machines, post bed sewing machines

Metal Slitting Saw, Hand Taper Pin Reamers, Hole Milling Cutter

Electroplated Diamond Slitting Saws, Diamond Triangle File, Pcd Inserts

diamond slitting saws, Diamond Cutting Tools, internal grinding pins

needle files, Ball Bearings, Coated Blades, HSS Power Hacksaw Blades

Printing Ink, Stitching Wire, wire binding machines, dampening cloth

Castings, Fabricated Components, Gears, Sprockets, Non Ferrous Castings

Cutting Tools, drilling taps